Content | 2-way bookshelf speaker
General Description |
2-way bookshelf speaker |
Enclosure Type |
bass reflex |
Transducer Complement |
2-way |
Bass Driver |
5“(130mm)
Black woven Kevlar cone |
Full Range Driver |
1“(25mm) soft dome |
Sensitivity (2.83v @ 1m) |
87dB |
Peak Power Handling |
25-100W |
Peak SPL |
95dB |
Nominal Impedance |
4Ω (compatible 8Ω ) |
Minimum Impedance |
3.8Ω |
Frequency Response (+/-3dB) |
56Hz ~ 20kHz |
Bass Extension (-6dB) |
50Hz |
Crossover Frequency |
2.4kHz |
Dimensions ( H x W x D ) |
(310+10) x 180 x (250+28)mm |
Net Weight |
6.0kg/pcs |
|
Driver Complements
Mid/Woofer 1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance aerated polypropylene cone with Extended Linear Motion voice coil driver
Tweeter 1 - 3/4" Diameter (1.91cm)
Dynamic Balance ring radiator tweeter
Electrical
Overall Frequency Response 90Hz-31KHz
Lower -3dB Limit 115Hz
Upper -3dB Limit 28KHz
Nominal Impedance 8 ohms
Recommended Amplifier Power 10-125 w/channel
Efficiency 88 dB
Inputs Gold-plated 5-way binding posts
Dimensions
Cabinet Size 7 3/4" H x 4 1/2" W x 5 15/16" D
(19.68cm H x 11.43cm W x 15.08cm D)
Mounting Options Included wall mount bracket; 1/4x20 threated insert
Enclosure Type Steel-plate reinforced curved enclosure with time-aligned driver geometry and PowerPort bass venting
Shipping/Other
Product Weight 3.00 lbs. (1.36kgs)
Shipping unit: each
Total Shipping Weight 3.70 lbs. (1.68kgs)
Speaker Warranty 5 years parts and labor (original purchaser)
Accessories (comes with) included wall mount bracket
ALSO AVAILABLE IS WHITE COLOR
|
Two way, bass-reflex
Woofer 170 mm.
Polypropylene pentapolymer
Tweeter 28 mm. silk soft dome
Impedance: 6 Ohm (min. 4)
RMS POWER: 80 W
MAX POWER: 125 W
Efficiency: 88 dB/W/1 m
Dimensions: 255x350x400mm.
Net weight: 13,5 Kg.
Finish: high gloss metallized
Colors: blue, red, silver grey,
charcoal grey, racing red |
Dimensions | Metric :6-1/4” W x 6-1/2” D x 10-7/8” H | 15.9 x 16.5 x 27.6 cm
Driver Complement :One 1" pure aluminum dome tweeter; One 5-1/4" BDSS bass/midrange drivers; One 5-1/4" pressure coupled bass radiator
Frequency Response :42 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :80 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Gloss Black; Gloss White
Accessories :Two ¼ 20 insert cover plugs; Tripod base
Mounting Options :Vertically: On Shelf with included tripod base; Equipped with rear ¼ 20 sized thread to accommodate on wall/on ceiling mounting with aftermarket articulating mount (articulating mount not included); Equipped with bottom ¼ 20 sized thread to accommodate ProStand 1000 stand mounting (ProStand 1000 available separately); Equipped with keyhole mounting slot for flush mounting
Packaging :One to a carton
Weight | Metric :6.5 lbs | 2.9 kg
Warranty :5 Years
|
System Format: 2 Way Frequency Response: 42 Hz - 60 kHz Sensitivity (1W@1M): 88 dB Nominal Impedance: 8 ohms Maximum S.P.L (Per pair in room): 112.6 dBA Power Handling (RMS): 120 W Recommended Amplifier Requirements (RMS): 60 - 120 W Bass Alignment: Bass reflex. HiVe port system Crossover Frequency: 2.7 kHz Drive Unit Compliment: 1 x 6.5" RST bass/mid-range driver 1 x C-CAM H.F ribbon transducer External Dimensions excl Stand (H x W x D) 362 x 210 x 303 mm (14 3/8 x 8 1/4 x 11 15/16 inch) Weight (each) Excluding stands: 9.9 Kg (21.75 lbs) AVAILABLE IN SIX COLOR FINISHES
|
Dimensions | Metric :4-3/4" W x 5" D x 8-3/8" H | 12.1 x 12.7 x 23.8 cm
Driver Complement :One 1" pure aluminum dome tweeter; One 4-1/2" BDSS bass/midrange drivers; One 4-1/2" pressure coupled bass radiator
Frequency Response :57 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :89 dB
Recommended Associated Amplifier Power :10 – 150 watts
A/V Receiver Crossover Setting :100 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Gloss Black; Gloss White
Included Accessories :Tripod Base; Two ¼ 20 insert cover plugs
Mounting Options :Vertically: On Shelf with included tripod base; Equipped with rear ¼ 20 sized thread to accommodate on wall/on ceiling mounting with aftermarket mount(available separately); Equipped with bottom ¼ 20 sized thread to accommodate ProStand 600/800 stand mounting (ProStand 600/800 available separately); Equipped with keyhole mounting slot for flush mounting
Packaging :One to a carton
Weight | Metric :4 lbs | 1.8 kg
Warranty :5 Years
|
Reviews
There are no reviews yet.