Content |
Enclosure Type ported
BASS 6
TWEETER 25mm TEX
NOMINAL IMPEDANCE 6ohms
DIMENSIONS 920 x 223 x 255
Mid - Range 6
Freq Range at -6 dB 40 - 20 khz
SPL 1W @ 1M 90dB
Recommend Amp 10 - 150W
|
Three way, bass-reflex
Sub-woofer 200 mm.
coated paper
Mid-woofer 130 mm. paper
Tweeter 28 mm. soft dome
coated silky fabric
Impedance: 6 Ohm (min. 4)
RMS Power: 120 W
MAX Power: 200 W
Efficiency: 90 dB/W/1 m
Dimensions: 325x385x1130 mm.
Net weight: 26 Kg.
Finish:
cherrywood, metallized mat grey
|
Dimensions | Metric :5-7/16" W x 4-1/4" D x 25-1/4" H | 13.8 x 10.8 x 64.1 cm
Height with Base | Metric :26-5/8” | 65.1 cm
Base Dimensions | Metric :8” W x 6” D | 20.3 x 16.5 cm
Driver Complement :One 1" pure aluminum dome tweeter; Two 4-1/2" high definition upper bass/midrange drivers; Two 4-1/2" pressure coupled bass radiators
Frequency Response :45 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :100 Hz
Inputs :One pair of 5 way binding posts
Enclosure :Aircraft grade extruded aluminum
Available Finishes :Gloss Black
Base :Tempered Glass
Mounting Options :Vertically Only: On Shelf with included glass base; On wall with included flush mounting bracket
Accessories :Wall bracket; Glass Base
Packaging :One to a carton
Weight | Metric :15 lbs | 6.8 kg
Warranty :5 Years |
Dimensions | Metric :46" H x 8-1/2" D x 5-1/2“W | 116.8 x 21.6 x 14.0 cm
Height with Base | Metric :47.5" | 120.7 cm
Base Dimensions | Metric :10-1/2" W x 14" D | 26.7 x 35.6 cm
Driver Complement :One 1" pure aluminum dome tweeter; Two 4-1/2" BDSS midrange drivers; One 5" x 10" long-throw racetrack subwoofer pressure coupled to two 5" x 10" long-throw racetrack radiators.
Frequency Response :16 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :93 dB
Recommended Associated Amplifier Power :20 – 250 watts
A/V Receiver Crossover Setting :Large; Full Bandwidth
Internal Amplifier Power :300 watt
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
Inputs :One pair of 5 way binding posts; One LFE input (optional)
Fuse :3.2 amp 250 volt Slo Blo (US) | 2 amp 250 volt Slo Blo (International)
Enclosure :Aircraft grade extruded aluminum
Available Finishes :Gloss Black
Base :Granite
Accessories :Plastic foot tippers; Isolation spikes
Packaging :One to a carton
Weight | Metric :54 lbs | 24.5 kg
Warranty :5 Years; 3 Years for Amplifiers
|
Two way, double reflex
2 x Woofer 130 mm.
Covered paper, double magnet
Tweeter 24 x 50 mm.
Isodynamic mylar diaphragm
Impedance: 8 Ohm (min. 6,5)
RMS Power: 100 W
MAX Power: 150W
Efficiency: 90 dB/W/1m
Dimensions: 170x1080x260mm.
Weight: 17 Kg.
Finish: rosewood, black oak
|
PRICE PER SPEAKER
Specifications Recommended Usage | Front Speakers | Type | 3-Way Bass Reflex Design | Woofers | Dual 6-1/2" PMD Cone | MidRange Driver | 5" Cone With Waveguide Horn | Tweeters | 1" Aluminum Dome With Waveguide Horn | Magnetic Shielding | Yes | Twin Bass Reflex Ports | Single Port | Gold-Plated Brass Extruded Terminals | Bi-Wiring Terminals | Frequency Response | 30 Hz - 35 kHz | Sensitivity | 88 dB/2.83 V/1 m | Input Power (Maximum / Nominal) | 250W / 100W | Impedance | 6 Ohms | Product Dimensions (W x H x D) | 8-3/4" x 38-9/16" x 13-9/16“ | Product Weight (lbs. each) | 20 Kg
|
---|
|
Reviews
There are no reviews yet.