WHARFEDALE EVP-X15 2-WAY SPEAKER 15ʼʼ 300W

2-way, 15ʼʼ, speaker system, 300watts continuours, 600watts
program, 1200watts peak, 8ohm, 98dB, 45Hz-20KHz.
System Type: 15” 2-way - Frequency Response: 45Hz-20kHz - Sensitivity
1w@1m/dB: 98 - Nominal Dispersion (H x V): 90º x 60º - Peak SPL (dB):
129 - System Impedance: 8 - Power Handling (watts): Continuous: 300, Music:
600, Peak: 1200 - LF Driver size (mm/ins): 380/15 - Coil size (mm/ins):
64.26/2.5” - Impedance (ohms): 8 - HF SECTION: Coil Size (mm/ins):
44/1.75”, Exit size (mm/ins): 25/1”, Diaphragm matl: Titanium, Impedance
(): 8 - HF Horn shape/size: elliptical/1” - X-OVER SECTION: Type: 2-
way full range, Low pass (Hz): 2.2kHz, HF driver protect type: Bulb, HF EQ
(boost/flat): 3dB - IN/OUT PANEL: Connectors input: 2 x 1/4” / +2
speakon™” - Weight net (kg): 25.9kg

Electro voice Zx5-60B

The Zx5 is a 15“, 2-way cabinet with a lightweight, high-impact composite enclosure, featuring the newest generation
of EV components: the DXV3150, 500W, 15" forced air cooled woofer with 3" voice coil, and the ND2, 2" neodymium
compression driver with a 2 mil titanium diaphragm. The Zx5 is rated for 600 watts long-term power handling (2400 W peak)
 and can produce 132 dB SPL with very smooth 58Hz-15kHz frequency response. With two available coverage patterns
(60?°x60?° or 90?°x50?°), two adjustable monitor angles (45?° or 55?°) and ten built-in rigging and suspension points allowing
for a variety of mounting accessories, the Zx5 fits a variety of applications: installations of individual speakers or clusters
in entertainment, cultural or religious venues, as well as on stages with bands, musicians and P.A. rental companies.
EV Zx5 loudspeakers are available in black and white for indoors and dedicated PI versions for outdoor applications.

• High-power 2-way PA sound reinforcement speaker system for live and playback applications (250 Watts Continuous / 1000 Watts Peak Power)
• Available in black or white finish
• Ultra-compact and light weight system delivers excellent sound even at extreme sound pressure levels
• Extremely powerful 15" long-excursion driver provides incredibly deep bass and acoustic power
• State-of-the-art 1.75'' titanium-diaphragm compression driver for exceptional high-frequency reproduction
• Ultra-wide dispersion, large-format exponential horn
• Overload-protection circuitry ensures optimal HF driver protection
• Versatile trapezoidal enclosure design allows different positioning:
• -Stand mounting with 35-mm pole socket
• -Tilts on its side for use as a floor monitor
• Optional swiveling mounting brackets
• Ergonomically shaped handles for easy carrying and setup
• 2 professional speaker connectors plus 1⁄4'' jack connectors
• High-quality components and exceptionally rugged construction ensure long life
• Conceived and designed by BEHRINGER Germany

These loudspeakers take everything musicians love about the original B215 and upgrade them with the same bass and treble/mid transducers found in our wildly popular B215A active versions for even better sound and power handling. And with integrated overload protection circuitry, they arrive ready to push it to the limit without putting their high or low frequency drivers in danger.

Every stitch of these loudspeakers is built to deliver, but the fact is that their transducers (woofers and tweeters) are the only part you actually hear. While some manufacturers are okay with putting off-the-shelf transducers in their boxes, we custom-design and build ours from scratch. Not only do we wind our own voice coils, we grow the trees that are processed into the paper pulp that becomes the cones. We even machine the frames and backplates. BEHRINGER's quality is truly under control.

Big here, small there, lots of this, light on that—everyone's got their preferences, but the EUROLIVE B215XL has proportions we can all agree upon. These loudspeakers pack a clean, punchy wallop (and can handle up to 1000 Watts), they are easy to lift by their recessed handles (38.7 lbs) and are available at insanely low prices. Who wouldn't want to hook up with one of these beauties?

The B215XL is perfect either as part of a PA system or as an onstage monitor. If the situation calls for a PA, mount the speakers on stands via the 35mm pole socket. From there, send a line from the MAIN OUT of a mixer (such as a XENYX 1202FX) to a power amplifier (like the EUROPOWER EP1500). Finally, attach B215XL to each of the amp's outputs. These loudspeakers have inputs for both professional speaker cable and ¼" cable. Because these loudspeakers have two parallel inputs, you can connect up to two of them to any channel on a power amp.

But they don't have to be confined to an upright position. Just lay them on their sides for use as a floor monitor. You'll find that they tilt to the ideal angle for onstage monitor wedge applications.

You asked for it, and now we're proud to offer these amazing loudspeakers in black or white. We now also make swiveling wall-mount brackets for the B215XL. That means they're ready to fit even more comfortably into a venue's color scheme and layout. No matter what your sound or aesthetic needs may be, we make one that's just right for you!

The Electro-Voice TX1152 Tour-X is a high power, high sensitivity, 15" 2-way PA loudspeaker system to use when high-quality sound reinforcement is required in a lightweight package.

The TX1152 PA speaker uses a DH3, high output 1.25" titanium compression driver, coupled to a Constant Directivity 60 degree x 40 degree horn. This combination results in a smooth response to 20 kHz and excellent pattern control in medium throw applications.

The SMX2151 15" woofer has an FEA optimized magnet structure and a shorting ring for ultra low distortion and maximum intelligibility at high SPL levels. The crossover uses steep 24 dB/octave slopes with equalization for very smooth response in vocal range, extended HF, and a protection circuit for long-term reliability.

The TX1152 has a variety of features that make it equally suited for portable or fixed installation applications. The trapezoidal enclosure is constructed out of a combination of plywood and MDF, and coated with EVCoat for maximum strength while still remaining lightweight. The unique grille design is very strong, dent resistant, and features a rotatable logo. Four way handles allow for gripping in a variety of positions, a pole mount allows for placement on a subwoofer or a tripod. Six 3/8" threaded points allow a single TX1152 to be suspended in a various positions. The recessed input panel with dual NL4 connectors panel keeps the connectors hidden, while allowing the TX1152 to be used with the TX1181 subwoofer for extended sub bass on a single amplifier channel, with no additional processing needed.

Large (15“) diameter woofer in a compact, lightweight enclosure.
Compact dimensions made possible by mounting the high frequency driver array in a coaxial configuration with the woofer.
Available in black or white and 100V line models
Extended bass frequencies for rich music reproduction.
The world's smallest* enclosure size relative to the diameter of the woofer.
Easy to transport thanks to compact and light enclosures that other speakers of this class cannot offer.

• Enclosure: Sealed type
• Power Handling Capacity: Continuous pink noise: 100 W, Continuous program: 300 W
• Rated Impedance: 8 Ω
• Sensitivity: 98 dB (1 W, 1 m)
• Frequency Response: 70 - 20,000 Hz
• Crossover Frequency: 3 kHz
• Directivity Angle: Horizontal: 90゜, Vertical: 40゜
• Speaker Component: Low frequency: 38 cm (15) cone-type
• Input Terminal: NEUTRIK NL4MP Speakon and M4 screw terminal, distance between barriers: 9 mm (0.35)“
• Operating Temperature: -10℃ to +50℃ (14゜F to 122゜F)
• Finish: Enclosure: Polypropylene, White
• Punched net: Surface-treated steel plate, White
  
• Dimensions: 451 (W) × 560 (H) × 400 (D) mm (17.76 × 22.05" × 15.75“)“
• Weight: 12 kg (26.46 lb)

Description:

The SX18 is a switchable 3 way active, 2 way passive, arrayable loudspeaker. Designed to be used as the main enclosure for small to mid-sized venues or as a supplemental cabinet for large scale sound reinforcement, this enclosure provides high sound pressure levels in a small, lightweight package. Adamson?s Proprietary Kevlar drivers and internal crossovers are employed throughout the SX18 enclosure and its integral fly hardware makes installation of the product fast and effective. Moving the SX18 is easy and efficient with the supplied dolly board. A flexible, high powered enclosure, the SX18 is suited for a wide variety of applications.

Applications:

Live Concert Reproduction
Side Fill Monitoring
Near Field Applications
Theatres
Houses of worship
Dance Clubs

Features:

Kevlar 18" bass and 10" midrange Drivers
1.5" High Frequency Compression Driver
2-Way Bi-Amp/3-Way Tri-amp Operation (selectable)
Adamson Acoustic Waveguide
Integrated Fly Points
Supplied Dolly Board
Durable, Dual Component Finish
Honeycomb Punched, Steel Grille
Roadworthy Construction

Weight: 67 kg