WHARFEDALE TITAN 15 15″ 2-way Passive Speaker White

EV\'s Rx Series loudspeakers have become the go-to systems for contractors, regional sound companies, and anyone who wants to step up to high-end pro audio without blowing the budget. With integrate L-track rigging points on top and bottom, the Rx cabinets are easy to fly. The unique, asymmetrical, fully rotable horn provides a 15-degree down angle to ensure HF coverage where needed, while avoiding acoustic spill. EV\'s powerhouse DH7 large-format driver (3" voicecoil, 1.4" exit) provides the HF engine, while a selection of EV\'s DL and EVZ woofers anchor the LF and sub frequencies. EV\'s combination of high-level components and unique design make the QRx Series one of the best and most versatile values in the industry.

15-inch two-way, full-range loudspeaker system with 450 watts continuous, 1,800 watts peak power handling. Can be easily biamped with 400 watts LF and 75 watts HFcontinuous DH73-inch voice coil compression driver on an asymmetrical 75-? x 50-? fully rotatable constant-directivity horn. In factory-delivered position the horn provides a 15-?up/35-? down vertical coverage pattern. The fully rotatable horn means that regardless of cabinet position, pattern control is fully user-determined Five-sided cabinet design allows this main PA system cabinet to easily conform to duties as a floor monitor, as a front-of-house system or to be tucked tightly against a ceiling for low-profile applications. Available in black or white. 18-ply, void-free plywood enclosure comes equipped with metal stand mount, L-track rigging on the top and bottom and a single-stud pull-up point on the rear of the enclosure for use flexibility Ring-Mode Decoupling for beautifully detailed vocals and smooth midrange performance

 Ειδική έκδοση του AM 7315/64 για χρήση σε
εξωτερικό περιβάλλον με επιπλέον αναβάθμιση
14 σημείων. Πιστοποίηση IP55 κατά πρότυπο IEC
529. Παράδοση κατόπιν παραγγελίας.

Ηχείο 3-Way Full-Range υψηλής ισχύος 1450W
κατασκευασμένο από πολύφυλλo ξύλο συμήδας
και επένδυση Duraflex. Απόκριση συχνοτήτων:
38 Hz - 20 kHz. Ευαισθησία: LF: 127dB-SPL cont
avg (133 dB peak) Tri-amp mode: MF: 133dBSPL
cont avg (139dB peak) HF: 135dB-SPL cont
avg (141dB peak) Bi-amp mode: MF/HF: 133dBSPL
cont avg (139dB peak) με woofer 15" 2265H
LF: 1000W (4000W peak), 2 hrs, 750 W (3000
W peak), 100 hrs JBL Differential Drive® διπλού
πηνίου 75mm (3-in). Driver μεσέων συχνοτή των
CMCD-82H 8" MF: 350 W (1400W peak), 2 hrs
με ενσωματωμένο περιστρεφόμενο κυματοδηγό
και 2432H driver υψηλών συχνοτήτων HF: 100
W (400 W peak), 2 hrs με στόμιο χοάνης 38mm
(1.5 in), πηνίο φωνής 75mm(3 in) και διασπορά
χοάνης. 60° x 40°. Δυνατοτητα διενίσχυσης/
τριενίσχυσης με διακόπτη. Διατίθεται και σε
λευκό χρώμα (-WH). Διαθέτει υποδοχές (13 x
M10) για eyebolts σε χρήση μόνιμων
εγκαταστάσεων (διατίθονται σαν option). Eπίσης
μπορεί να δεχτεί το Planar Array Frame kits PAF-
2K and PAF-3K για κρέμαση πολλαπλών ηχείων
(option). Χρήσεις: PA, θέατρα, Disco/Club,
Aμφιθέατρα, Αθλητικές Εγκαταστάσεις, θεματικά πάρκα κλπ.
Διαστάσεις ΥΠΒ 967 x 561 x 657 mm. Βάρος
45,8 κιλά.

With the newly designed D15-3, DYNACORD fulfi lls a longtime customer demand for a light-weight, extremely robust high-performance professional 15" 3-way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications.
With a variety of suspension accessories and conservative cosmetics, the D15-3 is also ideally suited to be used in demanding fi xed installations. The cabinet is manufactured from Polypropylene and therefore is extremely resistant against abuse on the road. For low frequencies a DYNACORD DND 15400 Neodymium cone transducer is used.
The midrange is projected from the ultra-low distortion DYNACORD DND 6120 Neodymium cone transducer with a conical radiation pattern of 120°. The DND 6120 guarantees excellent intelligibility without any necessity of precise aiming. The Electro-Voice DH 3 driver is used for the projection of the high frequencies. The Constant-Direcctivity HF horn has been integrated into the baffl e by CAD methods. The nominal coverage angle of the cabinet is 90°*50°, horizontal*vertical, respectively. Power handling of the cabinet is 500W (continuous), 1000W (program) and 2000W peak. The maximum sound pressure level is 130dB, the frequency range of the D15-3 is 50Hz to 18kHz. The D15-3 is ideally suited for applications as full-range cabinet or as Mid-Hi cabinet in in high-performance small-format active and passive satellite systems.

Ειδική έκδοση του AM 7315/95 για χρήση σε
εξωτερικό περιβάλλον με επιπλέον αναβάθμιση
14 σημείων. Πιστοποίηση IP55 κατά πρότυπο IEC
529. Παράδοση κατόπιν παραγγελίας.
     

Frequency Range       :       38 Hz - 19 kHz (-10 dB)

Frequency Response       :       45 Hz - 17 kHz ( ± 3 dB)

Coverage Pattern       :       90°x 50°, rotatable waveguide

Directivity Factor (Q)       :       10

Directivity Index (DI)       :       10 dB

Crossover Modes       :       Tri-amp / Bi-amp switchable

Passive Crossover Slopes       :       MF/HF Section in Bi-amp mode: 4th order (24 dB/oct) Linkwitz-Riley HP & LP, 2.1 kHz

Transducer Power Rating (AES)       :       LF: 1000 W (4000 W peak), 2 hrs
600 W (2400 W peak), 100 hrs
MF: 350 W (1400 W peak), 100 hrs
HF: 75 W (300 W peak), 2hrs

Long-Term System Power Rating (IEC)       :       LF: 600 W (2400 W peak), 100 hrs
MF/HF: 350 W (1400 W peak), 100 hrs

Maximum SPL       :       LF: 125 dB-SPL cont avg
(131 dB peak)
Tri-amp mode:
MF: 133 dB-SPL cont avg
(139 dB peak)
HF: 132 dB-SPL cont avg
(138 dB peak)
Bi-amp mode:
MF/HF: 132 dB-SPL cont avg
(138 dB peak)

System Sensitivity of Passive Sections 6       :       MF/HF Section in Bi-amp mode: 108 dB SPL (1W @ 1m)
 

Todayʼs sound reinforcement and public address applications require equipment that guarantee exceptional sound quality for a large variety of different events. Multi-functionality is a must in order to be able to react on-site to varying customer demands. The DYNACORD VL152 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL152 is ideally suited to be used in most demanding applications. The VL152 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies the light-weight DYNACORD DND15400 Neodymium transducer is used. High frequencies are radiated from a rotatable 90°*45° constant directivity horn equipped with an Electro-Voice ND6 1.4” driver. The VL152 can be used in passive fullrange mode and can be switched from the outside to ʽbiampedʼ operation. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available. EASE and Ulysses data allow fast and precise simulations.

Order-# D113104 Cabinet Full-Range Configuration passive 2-Way or Biamped Mode Nominal Impedance 8 ohms Rated Power RMS 500 watts Program Power 1000 watts Peak Power 2000 watts SPL 2,83 V/1m 100 dB max. SPL 1m (calc. with Peak) 133 dB Freq. Range (-10 dB) 50Hz - 20Hz Coverage Angle nom. 90° x 45° Passive X-Over Frequency 1,5 kHz VCT Protections yes Components HIGH Ev ND6-8 Order-# D361493 Components LOW DND 15400 Order-# D366303 Connectors SPEAKON 2x NL 4MPR Pin Wiring Normal/Fullrange 1+/1- Pin Wiring Biamped HF 2+/2- Pin Wiring Biamped LF 1+/1- Dimensions (WxHxD) mm 441x 780x 407 Net Weight 26 kg Enclosure Material Birch Plywood Finish Black 2-Component Structure Paint Grille Powder Coated Steel, Acoustic Foam