Content |
Wharfedale's titan sub a15 is a powerful active subwoofer system designed to produce high quality audio in any performance application. Optimised to complement the ultra portable titan series pa speakers, the sub a15 combines the newest technologies, materials and design to ensure absolute accuracy and high output of pure bass frequencies. The powerful 15" woofer is mounted on a 3" voice coil with integral signal processing, a dynamic automatic gain control circuit, stereo crossover and signal limiting all modelled round a built-n 400 watt (rms) amplifier, for an all-in-one bass enhancement system. A phase switch is included to allow for proper subwoofer signal polarity to be selected and with convenient and versatile connections, the sub a15 can easily be integrated into any set-up. A pair of balanced xlr output connections, with switchable "high-pass" mode are available for the stereo line level outputs, and they may also be used to send a high-pass, line-level stereo signal to a pair of powered, full-range speakers such as the popular wharfedale pro titan active models. The sheer functionality of the sub a15 means it can be utilised in any mobile dj or pa set-up, indoors or outdoors and even in fixed installations for clubs, bars, theatres or houses of worship.
TECHNICAL SPECIFICATIONS:
Road or installation use
400 watts (rms) active subwoofer
15" moisture proof custom woofer
Thermal, dc fault and short circuit protection
Peak limiter that protects the amplifier and speaker from clipping
Integral preset limiter prevents clipping and distortion
Power on and system agc protect led indicators
0°, 180° phase switch
Balanced xlr / 6.3mm (1/4“) jack combi inputs (summed stereo for 2.1 use)
2 x xlr / 6.3mm (1/4“) jack combi outputs
Integral crossovers (send a high-pass, balanced, line-level, stereo signal to powered satellite speakers or satellite speak amplifier)
Textured grey 18mm, 13 ply birch plywood enclosure
Rubberised over-moulded handles
Integral pole mount fitting
Weight: 50.0kg (including packaging)
Height: 74.0cm x Width: 73.0cm x Depth: 58.0cm
Warranty: 12 months
Power: 240V / 220V Only
|
User's manual
LD Systems STINGER SUB 15 A G3
Active 15" bass-reflex PA subwoofer
- Active 15” bass reflex PA subwoofer
- High-efficiency 450 watts RMS digital power stage and 133 dB max. SPL
- 15” custom design woofer for extended low end down to 40 Hz
- DynX® DSP technology for distortion-free performance
- 80, 100 and 120 Hz low pass presets
- Cardioid subwoofer array presets
- Horizontal or vertical placement
- 18 mm birch ply cabinet with ultra rugged polyurea finish
- Ergonomic handles and stacking recesses for easy transport and setup
- Shock-resistant front grill provides maximum speaker protection
- Insert for M20 threaded poles
- Smart transport accessories
STINGER SUB 15 A G3
Engineered for rock-solid reliability day in, day out this active subwoofer is a truly professional performer. With built-in presets for quick system integration and a variety of cardioid array configurations it is completely user-friendly. The Stinger® SUB 15 A G3 is powered by high efficiency Class D amplification with a mighty 450 watts RMS output. It drives a custom designed 15” woofer delivering a huge bottom end with terrific punch and excellent definition. The Stinger® SUB 15 A G3 incorporates LD Systemsʼ proprietary DynX® DSP technology to ensure top-level performance and pristine, distortion-free bass reproduction at all times. Designed to be a real workhorse throughout, the well-braced bass reflex enclosure is constructed for horizontal and vertical orientation. It is made of rigid 18 mm birch ply and coated with ultra tough polyurea for extraordinary strength and durability. Sporting a steel front grille, M20 threaded pole insert, stacking recesses and ergonomic handles the Stinger® 15 A G3 is an attractively priced choice for truly professional sound reinforcement. A large selection of accessories facilitate live and installed applications.
Product type
PA subwoofer
Type
active
Low/mid driver dimensions
15 "
Woofer Size
381 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
3 "
Woofer voice coil (mm)
76.5 mm
Amplifier
Class D
RMS
450 W
Peak power
900 W
Frequency response
40 - 200 Hz
Max. SPL (peak)
133 dB
Protection circuits
DC , limiter , over voltage , short circuit
Input impedance
30000 Ohm(s)
Input sensitivity
0.3 V
Controls
Main Level , mode
Indicators
limit , mode , on , protect (protection circuit engaged) , signal
Line inputs
2
Line input connectors
6.3 mm Jack , XLR
Line outputs
2
Line output connectors
XLR
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching) , SMPS
Power Consumption (max.)
600 VA
Operating Temperature
0 - 40 °C
Relative Humidity:
Cabinet material
18 mm Plywood
Cabinet surface
Polyurea
Cabinet construction
vented
Width
567 mm
Height
477 mm
Depth
624 mm
Weight
31,9 kg
|
- Two channel XLR/1/4 combination inputs
- Delay 0-150ms
- Power amp VU meter with LCD display
- Mic/line level selection
- Internal temperature monitor with variable speed cooling fan
- Auto power off
- On-board advanced digital signal processing
- Setup Wizard for easy configuration
- Heavy-duty locking casters
- Assignable crossover
- Ultra-braced cabinet assembly
- Direct-Thru output with combine function
- Power amp forced air cooling for maximum reliability
- Processed Thru output enables DSP to be used with external speaker cabinet
- Dual 15" woofers
- Ground lift
- Bass enhancement
- Pole mount
- Digital compression/limiting; 9-band EQ
- Heavy-duty steel perforated grille
- 2,000 Watts total peak power
- Weight Packed: 70.3 kg
- Width Packed: 72.39 cm
- Height Packed: 97.79 cm
- Depth Packed: 64.77 cm
| Features
- 1400 Watt Digital Amplifier
- 15" Woofer, bass reflex housing
- Stereo crossover
- Switchable crossover frequencies
- Phase-reverse switch
- Electronic equalization, soft limiter and protection
- Stereo XLR input, Stereo XLR signal output
Acoustical Specifications
- Frequency Response -3 dB: 40 Hz ÷ 120 Hz
- Max SPL: 131 dB
- Woofer: 15“, 3.0" v.c.
Input/Output Section
- Input connectors: Stereo XLR
- Output connectors: Stereo XLR
- Input sensitivity: -2 dBu / + 4 dBu
Processor Section
- Crossover frequencies: 80-110 Hz Hz
- Protections: thermal, rms
- Limiter: soft limiter
- Controls: Volume, EQ, phase, xover
Amplifier Specifications
- Total power: 1400 W PEAK
- Low frequencies: 1400 W PEAK
- Total power: 700 W RMS
- Low frequencies: 700 W RMS
- Cooling: convection
- Connections: VDE connector
Cabinet
- Cabinet Material: Baltic birch plywood
- Hardware: Pole mount
- Handles: 2 side
- Pole Mount/Cap: yes
- Grille: Steel
- Colour: Black
Physical Specifications
- Height: 568/22.36 mm/inch
- Width: 430/16.93 mm/inch
- Depth: 595/23.43 mm/inch
- Net Weight: 28.0/50.70 kg/lbs
The data are not binding; RCF reserves the right to modify the data at any time and without previous notice. | Looking for a portable and versatile active speaker for live sound applications? Then look no further than the Mackie Thump215XT 15" Powered PA Loudspeaker System with DSP and Bluetooth, a powerful PA speaker that includes a 2-channel mixer, great for small club/band PA systems, singer/songwriters, boardrooms, A/V presentations, classrooms, or as a personal monitor for practice or performance. The system features four application-specific voicing modes, an outdoor mode, and Bluetooth for streaming, speaker link, and wireless control.
The Thump215XT's mixer features two combo XLR-1/4" mic/line channels with dedicated gain controls, while an XLR output is provided for daisy-chaining additional speakers. A 3.5mm TRS aux input is also available on channel 2 for connecting your favorite portable player. The tough, impact-resistant polypropylene enclosure ensure protection from on-the-road wear and tear. The bottom of the cabinet provides a pole cup for mounting on a speaker pole or stand. Additionally, M10 fly points are included for permanent installation. The angled design allows the speaker to be used as a floor monitor for onstage performance monitoring.
- 1400W ultraefficient Class-D amplifier
- Built-Like-A-Tank to conquer every gig while lightweight for easy loading
- Frequency response: 40 Hz to 20 kHz
- Max SPL: 129 dB
- 15” high-performance woofer
- 1” compression driver
- Outdoor mode optimizes voicing for open air venues
- Built-in Feedback Eliminator reduces squeals and out of control rumble
- Music Ducking mode automatically reduces the level of Ch.2 when Ch.1 receives signal
- Front LED On/Off switch
- Standard pole mount
- M10 flypoints for permanent install
- Monitor wedge provides optimal angle for use as a floor monitor
- Universal power supply
Under the hood of ThumpXT is some powerful processing that you can tap into to up your sound quality game. With 4 different application-specific voicing modes, you can instantly optimize your speakers for how you use them at the push of a single button.
- Music: Made to enhance pre-recorded music
- Live: Great for general sound reinforcement
- Club: Provides a low-end punch
- Monitor: Optimizes the speaker for use as a floor wedge keeping feedback in check
Ever bring your speakers from inside a room to the scary outdoors and wonder why it sounds so different? You're not alone, and lucky for you we've thought of everything. When you set up your system out in the wild, just push the Outdoor Mode button and your lovely, full sound is restored.
Easily stream music directly to the speaker and enjoy the wireless freedom to dance around while playing DJ. And while you’re at it, you can dive into the Thump Connect 2 App and adjust anything from system EQ and Voicing Modes to channel levels and venue-specific presets.
- Bluetooth connectivity for streaming, speaker linking, and control
- Download the Thump Connect 2 app for complete wireless control
- Link 2 ThumpXT loudspeakers for a powerful, wireless, music playback system in both stereo and dual-zone configuration
- Channel 1 features a combo XLR-1/4" input that accepts mic or line signals
- Channel 2 features a combo XLR-1/4" line input plus stereo 3.5mm input
- Thru output contains audio from both input channels
These are the loudest, most powerful, and best sounding Thump loudspeakers ever, and they are ready to take on your most demanding gigs. Completely redesigned from the ground up, Thump has beefier drivers, 1400W Class-D amplifiers, and powerful tools to make your next gig easier than ever.
You've got music playing nice and loud, but it's time for another announcement. Sure, you could mess with your levels every time, but who's got time for that. Simply press the Music Ducking button, and channel 2 will automatically turn down whenever you speak into the mic on channel 1.
Ever get a little too up close and personal with the microphone only to hear a loud, ear-destroying squeal? That's commonly known as feedback. And it's an unfortunate issue that physics won't change its mind on. But wait! Hit the Feedback Eliminator button and laugh in the face of those silly acoustic laws.
|
15" Powered Subwoofer
- QuickSmartDSP features best-in-class processing, EV’s signature single-knob user interface, and intuitive menu navigation via LCD.
- Cardioid Control Technology allows output to be steered towards the audience with up to 35 dB reduction on stage when multiple subs are deployed.
- High-efficiency 1300 W Class D power amplifier delivers up to 133 dB peak SPL on the EKX-15SP utilizing high-sensitivity transducers designed and engineered by EV.
- Intelligent thermal management with a variable-speed fan controlled by multiple onboard sensors, ensuring superior performance and reliability in demanding environmental conditions.
- Two XLR outputs for easy system expansion to additional loudspeakers or subwoofers. Large slot ports for low distortion and excellent bass extension. Metal grille reinforcement bar (two on the 18SP). M20 threaded pole mount plate.
Width |
530mm (20.87“) |
Height |
455mm (17.91“) |
Connector Type |
(2) XLR/TRS combo jacks and (2) XLR link outputs |
Enclosure Material |
15 mm, plywood with EVCoat |
Family |
EKX |
Frequency Response (-3 dB) |
45 Hz - 150 HzkHz (Half Space Measurement) |
Grille |
18 AWG steel with powdercoat |
LF Transducer |
EVS-15C 381 mm (15 in) |
Low Pass Frequency |
Adjustable: 80 Hz, 100 Hz, 120 Hz, 150 Hz |
Max. SPL/1m (calc) |
133dB |
Maximum SPL |
133 dB peakdB (Maximum SPL is measured at 1 m using broadband pink noise at maximum output) |
Power Consumption |
1.8 A (Current rating is 1/8 power) |
Power Rating |
1300W |
Powered or Passive |
Powered |
Shipping Weight |
32.6kg (71.87 lbs) |
Speaker Type |
Subwoofer |
Woofer Size |
15inch |
requency Range (-10 dB) |
40 Hz - 180 HzkHz (Half Space Measurement) |
Weight Net |
26.2kg (57.76 lbs) |
Depth |
551mm (21.69“) |
Specifications
|
|
Reviews
There are no reviews yet.