Content |
15’’ subwoofer, 400watts continuours, 800watts program, 1600watts peak, 4ohm, 99dB, 45Hz-170Hz. System Type: 15’’ compact sub - Frequency Response: 45-200Hz - Sensitivity 1w@1m/dB: 99 - Peak SPL (dB): 131 - System Impedance: 4 - Power Handling (watts): Continuous: 400, Music: 800, Peak: 1600 - LF Driver size (mm/ins): 380/15 - Coil size (mm/ins): 77.06/3.0” - Impedance (ohms): 4 - X-OVER SECTION: Type: subwoofer, Low pass (Hz): 150Hz, High pass filter (Hz): 100Hz/12dB - IN/OUT PANEL: Connectors input: 2 x 1/4” / +2 speakon™” - High pass filter connector out: 1 x speakon™+1x1/4” - Weight net (kg): 33.5kg
|
Yamaha realized more than 40 years ago that simply building systems around speaker units bought from other manufacturers would not do, initiating a long and arduous but fruitful quest for ideal speaker performance based on original technology. Along the way innovative Yamaha speaker technology has resulted in a number of breakthrough products that established new performance standards in a number of critical fields.
Yamaha\'s new Installation Series Speakers address a number of important issues that give them unprecedented performance and handling characteristics for live sound applications, including permanent installations. In particular, phase characteristics have been kept smooth and consistent throughout the entire series, so you can mix and match speakers to suit any system and venue without ending up with hot and dead spots due to phase interference. And of course sonic quality is superb throughout the entire reproduction range so the full impact of the source material reaches the audience undiluted.
-
High power subwoofer.
-
Dual woofers can be switched for discrete drive (IS1215 and IS1218).
-
Twelve 10mm-screw suspension points (M10) provided for flexible rigging.
-
Durable black or white finish (can be painted to match any interior).
-
Optional matching array frame available (for IS1118 and 1218 only).
-
Parallel-wired Neutrik NL4 and barrier strip connectors.
Drive Mode |
Parallell/Discrete |
Frequency Range (-10 dB) |
40 Hz-2.5 kHz |
Power Rating (Parallel) |
NOISE: 1400W; PGM: 2800W; MAX: 5600W |
Power Rating (Discrete) |
NOISE: 700W x 2; PGM: 1400W x 2; MAX: 2800W x 2 |
Nominal Impedance |
Parallel: 4 ohms; Discrete: 2 x 8 ohms |
Sensitivity (1 W@1 m) SPL |
Parallel: 97dB; Discrete: 100dB |
Calculated Peak SPL |
Parallel: 134dB; Discrete: 134dB |
Calculated Continuous SPL |
Parallel: 128dB; Discrete: 128 B |
Components |
2x 15" woofer, 4" voice coil |
Shape |
Rectangular |
Material |
3/4 inch (19 mm), 13-ply Finish Birch (Baffle and Inner Wall), 5/8 inch (16 mm), 11-ply Finish Birch |
Grill |
16 gauge powder coated perforated steel grilles, backed w/ acoustically transparent reticulated foam |
Connectors |
1 x Neutrik NL4 and barrier strip, wired in parallel |
Flying Hardware |
12 x M10 for shoulder eyebolts |
Handle |
Four |
Dimensions (H x W x D) |
34.8" (883 mm) x 17.6" (448 mm) x 24" (610 mm) |
Weight |
139 lbs (63 kg) |
|
Ειδική έκδοση του AM 7115 για χρήση σε
εξωτερικό περιβάλλον με επιπλέον αναβάθμιση
υλικών προστασίας. Πιστοποίηση IP56 κατά
πρότυπο IEC 529. Παράδοση κατόπιν
παραγγελίας.
Frequency Range (-10 dB): 40 Hz – 4.2 kHz
Frequency Response (±3 dB): 47 Hz - 3.0 kHz
Transducer Power Rating (AES): 1000 W (4000 W peak), 2 hrs
Long-Term System Power Rating (IEC): 600 W (2400 W peak), 100 hrs
Maximum SPL: 50 Hz –125 Hz
125 Hz – 800 Hz: 126 dB-SPL cont avg
(dB-SPL, 1W @ 1m): 50 Hz – 125 Hz
125 Hz – 800 Hz: 97 dB
Nominal Impedance: 8 ohms
Low Frequency Driver: 1 x JBL 2265H 380 mm (15 in) Differential Drive driver with 75 mm (3 in) dual voice coil
Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood
Suspension Attachment: 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware
Finish: Black DuraFlex™ finish.
Grille: Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
Input Connector: NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental Specifications: Mil-Std 810; IP-x3 per IEC529
Dimensions (H x W x D in vertical cabinet orientation): 548 x 561 x 657 mm
Net Weight: 25.9 kg (57 lb)
Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.
|
The Sub 1.15 is the ideal bass extension for the Corus C 12.2 or C 15.2 full-range cabinets.
In the low frequency range between 40 Hz and 260 Hz a Electro-Voice EVS-15S woofer in direct-radiator bass-reflex design produce an max. SPL of 125 dB.
Thanks to their low-pass filter, the Sub 1.15 can be operated simply in parallel mode to existing full-range cabinets. Also recommended, naturally, is the combination with the DSP 260 or DSP 600 and power amplifiers from the SL or LX series for the creation of active two-way systems.
Cabinet Subwoofer
Configuration Vented Direct Radiator
Components 1x 15" EVS-15S
Impedance 8 ohms
Rated Power 500 W
Peak Power 2000 W
SPL 1W/1m 93 dB
max. SPL 1m calc. 125 dB
Freq. Range 40 Hz - 260 Hz
Dimensions (WxHxD) mm 445 x 605 x 550
Net. Weight 28,5 kg
| LD Systems STINGER SUB 15 G3 Passive 15” Bass Reflex PA Speaker
This highly professional passive subwoofer is designed for absolute, long-term reliability. The Stinger® SUB 15 G3 provides 600 watts of continuous power; the maximum sound pressure level is 126 dB. Its specially developed 15" woofer also emits the deepest bass sounds with extremely powerful and clear contours. Designed as a real all-round workhorse, the strongly supported bass reflex cabinet is designed for horizontal and vertical use. It is made from robust 18 mm birch plywood and offers exceptional stability and durability thanks to its extremely durable polyurea coating. The features include a steel grille, a thread insert for M20-extension tubes, stacking dimples and ergonomic handles. The Stinger® SUB 15 A G3 is an affordable solution for professional PA applications; extensive accessories support use on stage and in fixed installations.
Product type
PA subwoofer
Low/mid driver dimensions
15 "
Woofer voice coil (mm)
76.5 mm
Frequency response
40 - Crossover Hz
Speaker input connections
Speakon compatible
Speaker output connections
Speakon compatible
Speakers per amplifier channel (DSP44/45K)
3
Cabinet material
18 mm Plywood
Cabinet construction
Bass Reflex
|
1600 W (peak), 133 dB peak SPL on the EKX-15S utilizing highsensitivity transducers designed and engineered by EV. Lightweight, compact 15-mm wood enclosure with internal bracing, and durable EVCoat finish. Large slot ports for low distortion and excellent bass extension. Metal grille reinforcement bar (two bars on the EKX-18S). M20 threaded pole mount plate.
Brand | ELECTRO VOICE | Model | EKX-15S | Part Number | F01U303366 | Speaker Type | Passive | Speaker Category | SubWoofer | Construction Material | Wooden Cabin | Total Power (Watt) | 400 | resistance (ohms) | 8 ohms | Woofer (inches) | 15 | dB (max spl) | 133 | Sensitivity (1W / 1m) | 95 | Frequency Response (Hz) | 40-300 | Weight (kg) | 24,9 | Color | Black | Application | Installation, Portable PA | Series | EKX series | Warranty | 5 Years |
|
Reviews
There are no reviews yet.