| Content |
EVP-X15PB: powered version for EVP-X15B; 400W(RWS)/600W
(PEAK); 0-180 degree phase switch, stereo line input and speaker level
input; high pass balanced line output for mid/high satellite speaker connection
SYSTEM TYPE: 15” compact sub - FREQ RESP +/ - 3 DB: 45 - 200Hz -
FINISH MATERIAL: Black carpet - TRIPOD STAND BOTTOM: No -
TRIPOD STAND TOP: Yes - INPUTS: INPUT A: Line level input / INPUT
B: Line level input - SPEAKER LEVEL INPUT: 1/4” TS Phone Jack - INPUT
CONNECTORS: INPUT A: Combined Jack and XLR / INPUT B: Combined
Jack XLR - INPUT SENSITIVITY: MIC: NA / RCA: NA / LINE:
0.775V - INPUT IMPEDANCE: MIC: NA / LINE INPUT A: 10K / LINE
INPUT B: 10K / LINE OUTPUT TYPE: Balanced Male XLR connector -
LINE OUTPUT HIGH PASS FILTER: MAIN EQ: NA - ACTIVE
CROSSOVER: LPF: 150HZ, 24dB - PHASE SWITCH: 0 or 180º - POWER
SECTION-AMPLIFIER POWER, CONTINUOUS: 400W - PEAK: 600W
- EXTENSION SPEAKER OUTPUT: NA - PROTECTION TYPE: Dynamic/
AGC - POWER ON INDICATOR: Green LED - SYSTEM DYNAMIC
AGC: Orange LED - ENCLOSURE - DIMENSION MM
(HXWXD): 591X460X510 - WEIGHT (NET) KG: 35.1 - WEIGHT
(GROSS) KG: 38.1
|
The dB1500a is a self-powered subwoofer featuring a heavy-duty 15" low frequency driver with butyl surround, complemented by a 1000 Watt power amplifier. The dB1500a provides an active stereo crossover with high-passed output for running your satellite speakers. Constructed of solid 3/4 inch plywood, with steel corners, tough carpet covering and large casters. The sub-woofer features large metal grab handles and a 35mm pole mount receptacle. In fixed installation systems, the dB1500a provides super tight low frequency output in a relatively small, unobtrusive enclosure. Perfect for any sound reinforcement system where low-end is desired.
Heavy-duty, 15-inch Low Frequency Transducer
Built-in Amplifier Delivers 1000 watts of Program Power
Variable Stereo Crossover with Balanced High Pass Outputs for Satellite Speakers
Heavy-Duty, Rear Mounted Casters
Extra Large Grab handles and 35mm Pole mount receptacle
3/4" Internally braced, plywood construction
Covered in tough carpet, with steel corners
| Professional 500-Watt powered subwoofer for PA applications. Powerful 15'' long-excursion transducer with high temperature voice coil provides incredibly accurate and pulse-pounding bass. Precise reproduction of ultra-low frequencies for "bulletproof" punch and impact. State-of-the-art 500-Watt Class-D amplifier with comprehensive over-excursion, thermal and clip limit protection. Built-in active stereo crossover provides high-pass filtered outputs for full-range loudspeakers. Tunable and switchable Bass Boost plus Phase switch for ultimate low-frequency performance. Variable High Cut control for perfect sound alignment. Subwoofer Level control to adjust the balance between subwoofer and the full-range speakers. Power, Signal and Clip LEDs for perfect monitoring. Intelligent limiter for maximum sound performance and woofer protection. Internal switch-mode power supply for noise-free audio, superior transient response and very low power consumption. Pole socket for mounting with commercial spacer poles. Ergonomically shaped handles for easy transport. Rugged steel grill for optimal speaker protection. Weight 33 Kgr. |
Are you looking for a deep and punchy bass in a small pack?
The choice is easy: ART 905-AS.
It is an extremely compact and easy to transport high power active subwoofer, just a bit larger than the 902-AS in order to take the newly designed 15” neodymium woofer for a deeper bass punch.
The cabinet is made in Baltic Birch and heavy duty painted.
| Acoustical Specifications |
|---|
| Frequency Response -3 dB: | 40 Hz | ÷ 120 kHz | | Max SPL: | 131 dB | | | Woofer: | 15“, 3" v.c. | |
| INPUT/OUTPUT SECTION |
|---|
| Input signal: | bal / unbal | | | Input connectors: | Stereo combo xlr-jak | | | Output connectors: | Stereo xlr | | | Input sensitivity: | -2 dBu / +4 dBu | |
| PROCESSOR SECTION |
|---|
| Crossover frequencies: | 80 - 120 Hz | | | Protections: | Thermal, rms | | | Limiter: | Limiter | | | Controls: | Volume, phase, xover | |
| AMPLIFIER SPECIFICATIONS |
|---|
| Total power: | 1000 Watts | | | Low frequencies: | 1000 Watts | | | Cooling: | Convection / forced | | | Connections: | VDE connector in / out | |
| CABINET |
|---|
| Cabinet Material: | Balitc birch | | | Handles: | 2 on side | | | Pole Mount/Cap: | Yes | | | Colour: | Black | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 600 / 23.62 mm/inch | | | Width: | 445 / 17.51 mm/inch | | | Depth: | 600 / 23.62 mm/inch | | | Net Weight: | 34 / 74.95 Kg/Lbs |
|
- Powered 2.1 PA with 15" subwoofer and two 8" satellites
- Total power: 2060 W
- Integrated 6-channel mixer with EQ and reverb
- Selectable input for microphone, Hi-Z or Line
- Digital SPDIF TOSLINK stereo input
- Wireless streaming via Bluetooth
- Homogeneous dispersion thanks to newly developed waveguides
- DynX® DSP for distortion-free sound reproduction
- Selectable presets depending on the setup (stereo / cluster mode)
- Durable polyurea coating for subwoofer and satellites
General
Product type
PA Complete Systems
System output (RMS)
1030 W
System output (Peak)
2060 W
Max. SPL (Avarage)
124 dB
Frequency response (-10dB)
33 - 20000 Hz
Crossover frequency
105 Hz
Dispersion (H x V)
90° x 30 °
Subwoofer
Low/mid Woofer dimensions
15 "
Woofer dimensions (mm)
381 mm
Woofer voice coil (mm)
75 mm
Cabinet construction
Bass Reflex
Cabinet material
15 mm Multiplex, 18 mm Multiplex
Subwoofer features
3 Reverb presets, 6 channel mixer, Bluetooth, Cluster / Stereo Preset, M20, SPDIF
Mid/Hi System
Midrange dimensions (mm)
203.2 mm
Midrange brand
Custom-made
Midrange voice coil
1.5 "
Midrange voice coil
38.6 mm
Tweeter dimensions
2 x 0.5 "
Tweeter dimensions (mm)
2 x 12.7 mm
Tweeter brand
Custom-made
Tweeter voice coil (mm)
25.4 mm
Mid/Hi system impedance
4 Ohm(s)
Mid/Hi system speaker connections
1
Mid/Hi system speaker connections
Speakon compatible
Cabinet construction mid/high
Bass Reflex
Carrying Handles Mid / Hi System
1
Mid/Hi system cabinet material
12 mm Multiplex, 15 mm Multiplex
Mid/Hi system cabinet surface
Polyurea
Mid/Hi system width
275 mm
Mid/Hi system height
470 mm
Mid/Hi system depth
260 mm
Mid/Hi system weight
9.7 kg
Mid/Hi system features
Dual - Tilt flange, Midrange Waveguide
Amplifier module (integrated in subwoofer)
Amplifier output subwoofer (RMS)
500 W
Amplifier Output Mid/Hi (RMS)
2 x 265 W
Protection circuits
limiter, overload, short circuit
Operating Temperature
0°C - 40 °C
Humidity Range
< 80 % ( non-condensing )
Controls
Input type, Input volume, Low / High EQ, Main volume, Power, Reverb, Stereo / Cluster mode, Sub / High level
Indicators
Limit, Power, Protect, Signal
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Multi input
2 x switchable (MIC, LINE, HI-Z)
Multi input connector
Combo XLR
Line input connectors
Combo XLR, RCA
Digital input connectors
SPDIF
Speaker output connections
Speakon compatible
Bluetooth Audio Decoder
SBC
| Looking for a portable and versatile active speaker for live sound applications? Then look no further than the Mackie Thump215XT 15" Powered PA Loudspeaker System with DSP and Bluetooth, a powerful PA speaker that includes a 2-channel mixer, great for small club/band PA systems, singer/songwriters, boardrooms, A/V presentations, classrooms, or as a personal monitor for practice or performance. The system features four application-specific voicing modes, an outdoor mode, and Bluetooth for streaming, speaker link, and wireless control.
The Thump215XT's mixer features two combo XLR-1/4" mic/line channels with dedicated gain controls, while an XLR output is provided for daisy-chaining additional speakers. A 3.5mm TRS aux input is also available on channel 2 for connecting your favorite portable player. The tough, impact-resistant polypropylene enclosure ensure protection from on-the-road wear and tear. The bottom of the cabinet provides a pole cup for mounting on a speaker pole or stand. Additionally, M10 fly points are included for permanent installation. The angled design allows the speaker to be used as a floor monitor for onstage performance monitoring.
- 1400W ultraefficient Class-D amplifier
- Built-Like-A-Tank to conquer every gig while lightweight for easy loading
- Frequency response: 40 Hz to 20 kHz
- Max SPL: 129 dB
- 15” high-performance woofer
- 1” compression driver
- Outdoor mode optimizes voicing for open air venues
- Built-in Feedback Eliminator reduces squeals and out of control rumble
- Music Ducking mode automatically reduces the level of Ch.2 when Ch.1 receives signal
- Front LED On/Off switch
- Standard pole mount
- M10 flypoints for permanent install
- Monitor wedge provides optimal angle for use as a floor monitor
- Universal power supply
Under the hood of ThumpXT is some powerful processing that you can tap into to up your sound quality game. With 4 different application-specific voicing modes, you can instantly optimize your speakers for how you use them at the push of a single button.
- Music: Made to enhance pre-recorded music
- Live: Great for general sound reinforcement
- Club: Provides a low-end punch
- Monitor: Optimizes the speaker for use as a floor wedge keeping feedback in check
Ever bring your speakers from inside a room to the scary outdoors and wonder why it sounds so different? You're not alone, and lucky for you we've thought of everything. When you set up your system out in the wild, just push the Outdoor Mode button and your lovely, full sound is restored.
Easily stream music directly to the speaker and enjoy the wireless freedom to dance around while playing DJ. And while you’re at it, you can dive into the Thump Connect 2 App and adjust anything from system EQ and Voicing Modes to channel levels and venue-specific presets.
- Bluetooth connectivity for streaming, speaker linking, and control
- Download the Thump Connect 2 app for complete wireless control
- Link 2 ThumpXT loudspeakers for a powerful, wireless, music playback system in both stereo and dual-zone configuration
- Channel 1 features a combo XLR-1/4" input that accepts mic or line signals
- Channel 2 features a combo XLR-1/4" line input plus stereo 3.5mm input
- Thru output contains audio from both input channels
These are the loudest, most powerful, and best sounding Thump loudspeakers ever, and they are ready to take on your most demanding gigs. Completely redesigned from the ground up, Thump has beefier drivers, 1400W Class-D amplifiers, and powerful tools to make your next gig easier than ever.
You've got music playing nice and loud, but it's time for another announcement. Sure, you could mess with your levels every time, but who's got time for that. Simply press the Music Ducking button, and channel 2 will automatically turn down whenever you speak into the mic on channel 1.
Ever get a little too up close and personal with the microphone only to hear a loud, ear-destroying squeal? That's commonly known as feedback. And it's an unfortunate issue that physics won't change its mind on. But wait! Hit the Feedback Eliminator button and laugh in the face of those silly acoustic laws.
|
Reviews
There are no reviews yet.