WORK WDT 24 Wireless digital audio transmitter

94.85 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
WDT 24 is a wireless transmitter in the operating free band ISM 2.4 GHz, which has been designed to work with the wireless receiver WDR 24, creating a digital audio wireless system. The transmitter WDT 24 can work with one receiver, or with up to 10 receivers WDR 24, covering a distance of more than […]

 

Read more

WDT 24 is a wireless transmitter in the operating free band ISM 2.4 GHz, which has been designed to work with the wireless receiver WDR 24, creating a digital audio wireless system.

The transmitter WDT 24 can work with one receiver, or with up to 10 receivers WDR 24, covering a distance of more than 30 metres in open places.

  • Wireless Digital Audio Transmitter System
  • Operating Band ISM 2.4GHz (free band).
  • One transmitter WDT 24 paired with one receiver WDR 24, or one transmitter WDT 24 paired with up to ten receivers WDR 24.
  • GFSK digital modulation/demodulation.
  • External antenna can help to increase the transmission distance.
  • Intelligent Frequency Hoping can help to avoid interference effectively and to ensure the channel quality.
  • Automatic mute in bad channel quality conditions or high error code rate.
  • Transmission distance higher than 30 meters in open places.
  • Up to three transmitters WDT 24 in a zone
  • Balanced XLR and ¼\’\’ jack inputs.
  • Working mode: stereo or mono
Power Supply AC 9V-500 mA 50/60 Hz
Frequency 2404-2476MHz
Channel 25
Modulation/Demodulation GFSK
Receive Sensitivity (WDR 24) -84dBm (min.)
Transmitted Power (WDT 24) 6 dBm
Output Level (WDR 24) +13dBu (BAL max.)
Input Level (WDT 24) +5dBu (max.)
Bandwidth >=1.8 MHz
Frequency Response 20Hz – 20kHz, +3dB / -3dB
S/N >80 dB
Dynamic Range @ 1 kHz >90 dB
Crosstalk @ 1kHz >90 dB
THD
Weight 0.50 kg

Reviews

There are no reviews yet.

Be the first to review “WORK WDT 24 Wireless digital audio transmitter”

Your email address will not be published. Required fields are marked *

Quick Comparison

WORK WDT 24 Wireless digital audio transmitter removeBehringer MULTIGATE PRO XR4400 Quad Expander/Gate removeAPOGEE BIG BEN Digital signal generator removeDBX 530 PARAMENTRIC EQ MODULE removeAPOGEE SIOC Electronics Symphony I/O Chassis removeBSS BLUCARD-IN 4 analog input mic/line card for Soundweb remove
NameWORK WDT 24 Wireless digital audio transmitter removeBehringer MULTIGATE PRO XR4400 Quad Expander/Gate removeAPOGEE BIG BEN Digital signal generator removeDBX 530 PARAMENTRIC EQ MODULE removeAPOGEE SIOC Electronics Symphony I/O Chassis removeBSS BLUCARD-IN 4 analog input mic/line card for Soundweb remove
Image
SKUWDT 24E005394BIG BENDBX 530SIOCZ-BLUCARD-IN
Rating
Price 94.85 incl. GR VAT 145.00 incl. GR VAT 1,730.25 incl. GR VAT 346.00 incl. GR VAT 1,604.05 incl. GR VAT 384.39 incl. GR VAT
Stock

In stock

In stock

In stock

Available on backorder

In stock

In stock

AvailabilityIn stockIn stockIn stockAvailable on backorderIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

WDT 24 is a wireless transmitter in the operating free band ISM 2.4 GHz, which has been designed to work with the wireless receiver WDR 24, creating a digital audio wireless system.

The transmitter WDT 24 can work with one receiver, or with up to 10 receivers WDR 24, covering a distance of more than 30 metres in open places.

  • Wireless Digital Audio Transmitter System
  • Operating Band ISM 2.4GHz (free band).
  • One transmitter WDT 24 paired with one receiver WDR 24, or one transmitter WDT 24 paired with up to ten receivers WDR 24.
  • GFSK digital modulation/demodulation.
  • External antenna can help to increase the transmission distance.
  • Intelligent Frequency Hoping can help to avoid interference effectively and to ensure the channel quality.
  • Automatic mute in bad channel quality conditions or high error code rate.
  • Transmission distance higher than 30 meters in open places.
  • Up to three transmitters WDT 24 in a zone
  • Balanced XLR and ¼\'\' jack inputs.
  • Working mode: stereo or mono
Power Supply AC 9V-500 mA 50/60 Hz
Frequency 2404-2476MHz
Channel 25
Modulation/Demodulation GFSK
Receive Sensitivity (WDR 24) -84dBm (min.)
Transmitted Power (WDT 24) 6 dBm
Output Level (WDR 24) +13dBu (BAL max.)
Input Level (WDT 24) +5dBu (max.)
Bandwidth >=1.8 MHz
Frequency Response 20Hz - 20kHz, +3dB / -3dB
S/N >80 dB
Dynamic Range @ 1 kHz >90 dB
Crosstalk @ 1kHz >90 dB
THD

The MULTIGATE PRO XR4400 provides four frequency-selective expanders/noise gates in a single rack space. Each section comprises an ultra-fast gate, a program dependent expander, a filter section and precision meters indicating both threshold point and gain reduction.

The included side chain parametric filters allow the user to fine-tune control signals so that the gate reacts only when required. The Interactive Attack Control (IAC) circuit analyzes the program material to calculate the attack time of the gate. Separate hold and release controls offer additional flexibility. The XR4400 has a switchable operating mode for the gate and expander. With the MODE function off, the unit works in gate mode using an extremely fast attack time, thus preserving the transient details of the program material. In expander mode, the device analyzes the shape and dynamic contents of the input signal to calculate the control time parameters. The result is that vocals, instruments and complex mix signals can be cleaned up without audible clicks or other detrimental effects.

A couple function on the XR4400 provides a great deal of flexibility to link the expander/gate sections in a master/slave configuration.

Quadruple expander/gateHigh-precision parametric filter for frequency selective operationFully adjustable Ratio control in Expander modeFully adjustable Attenuation control in Gate modeIndependent Hold/Release controls for any envelope shapingFlexLink system for flexible Master/Slave configurationsExtremely low-noise operational amplifiers and high-grade VCA\'sFilter Monitor facility for monitoring the filter sectionHigh-quality detent potentiometers and backlit switchesServo-balanced gold-plated XLR and 1/4" TRS inputs and outputs8-digit LED meters for input level, output level and gain reduction monitoring

Function Four channel expander/gate
Number of Channels 4
Inputs 4 x XLR, 4 x TRS 1/4" phone
Output 4 x XLR, 4 x TRS 1/4" phone
Maximum Input Level +21dBu
Compression Threshold Not applicable
Compression Ratio Not applicable
Attack Time Not applicable
Release Time Not applicable
Gate Threshold 0 to -80dB
Gate Rate Attack: Program dependant
Hold: 0 to 4 sec, variable
Release: 50ms to 4 sec, variable
Maximum Output Level +21dBu
Make-up Gain Not specified by manufacturer
Frequency Response 18HZ to 30kHz
Dynamic Range Not specified by manufacturer
Noise >95dBu, unweighted, 22Hz to 22kHz
Dimensions 1U rack mount, 8 1/2" deep
Specialties Unit will operate at either +4dB or -10 dB

                    AES, S/PDIF, Optical I/O - Word Clock/Video In - 6 Word Clock Outs
                    Optional X-Video expansion card to provide master video sync generator
                    Realtime format conversion between all digital formats
                    Direct Digital Synthesis (DDS) using Apogee´s C777 Clock Technology up to 192kHz
                    Adaptive Loop Filtering (ALF) to optimize clock performance and minimize jitter
                    Three stage Termination Sensing for each word clock output

                
                INPUTS
                    2 x AES-EBU on XLR 44.1k-192k single-wide and 88.2 k–192k double-wide.
                    S/PDIF optical on TOS-LINK 44.1-48k
                    S/PDIF coaxial on RCA 44.1-192k
                    ADAT 44.1-48k
                    ADAT/SMUX II for 88.2-96k
                    ADAT/SMUX IV for 176.4-192k
                    Word Clock BNC 44.1 –192k
                    Video
                    Optional video sync (X-Video card)
                
                OUTPUTS
                    2 x AES-EBU on XLR single or double wide 44.1-192k
                    S/PDIF coaxial 44.1-192k
                    S/PDIF optical on TOS-LINK 44.1-48k
                    6 x BNC Word Clock 44.1-192k (of which 2 can output 256fs at low sample rates)
                    ADAT
                    SMUX II
                    SMUX IV
                    Optional video sync (X-Video card)
                
                SPECS
                    Sample rates: 44.1/48-88.2-96-176-192 . All +/- 10%
                    Video: PAL/NTSC/60Hz
                    "SuperClock" (256fs)
                    Pull up/down 0.1% and 4% from any sample rate
                    Apogee´s new Ultra Low Jitter C777 clock
                    Three stage termination indicator (under/correct/over) on each
                    Word Clock output:
                    "SureLock" technology for drop out prevention
                    4 digit numeric true sample rate indication
                    Universal power: 15 W 90-250 VAC 50-60 HZ

 

 

Connection:

Any interface with these digital I/O connections:
Word clock, ADAT/SMUX, S/PDIF, AES
         
Operating System:

Mac and Windows    

The dbx 530 Parametric EQ offers a unique degree of equalization flexibility in the popular 500 Series format. Based upon the classic dbx 905, the dbx 530 is an uncompromising equalizer offering true, fully parametric operation of all three filter bands! dbx has a much-heralded history with modular processors dating back to our 900 Series, and the dbx 530 continues that tradition.

The dbx 530\'s overlapping bands each offer control of frequency bandwidth (Q) and up to 15dB of reciprocal cut or boost to provide exact, complimentary filter action for the most demanding of equalization needs. For problem situations requiring the removal of spurious signals, each of the bands can be independently switched into ?infinite notch? mode without affecting the operation of others. In situations where a shelving equalizer will produce better results than a peaking one, the 530’s high and low bands can be independently switched from peaking to shelving operation. You can also make instant affected/bypassed comparisons using the 530\'s ?On? switch.

Load up your 500 Series rack with dbx 530 Parametric EQs­­ and cut your way through mixes like an audio surgeon!

The Symphony I/O Chassis from Apogee provides two I/O Module slots for a variety of digital audio conversion options that form the interface side of the Symphony I/O. Elegant and easy to use, the front panel of Symphony I/O Chassis presents the visual feedback needed to monitor levels, sample rate and clock status, along with the controls required to adjust gain, output levels ,and select the Audio Interface Mode (AIM).

The rear panel provides access to the two I/O Module slots that are capable of a combined thirty-two channels of input and output. PCI, USB and Ethernet connectivity ensures complete compatibility with popular workstations, while the panel also includes Wordclock I/O connectors and termination, LoopSynch I/O connectors, and a quiet digitally-controlled fan to keep everything running cool.

The Audio Interface Mode (AIM) allows the system to be optimized for the most popular audio workstation environments, including Symphony PCI, Pro Tools HD PCI, USB audio, or to function as a standalone converter. With a two-step adjustment using a single front panel encoder knob, the interface can be easily switched back and forth between the preferred modes.

The optional five I/O Modules allow the user to choose from standard configurations, or customize the following - channel count, analog to digital input, digital to analog output, microphone preamps (requires an analog card) and digital I/O.

Two input/output module slots Ethernet connector USB 2.0 connector Two Symphony PC-32 ports for direct connection to Symphony 64 PCI card and Pro Tools core card Wordclock I/O and LoopSync I/O Wordclock termination switch Sixteen, 10-segment meters Two multi-function encoder knobs OLED GUI provides function selection and function adjustment and Audio Interface Mode (AIM) selection Two 1/4" headphone outputs 7-segment sample rate display Clock source display Meter source display High-performance, temperature controlled fan  Connectors     2 x 1/4" TRS phone Headphone
2 x Symphony I/O PC-32 Ports
1 x Ethernet
1 x USB
2 x BNC Wordclock I/O
2 x BNC LoopSync I/O
Headphones     THD+N: -105dB @ 19dBu
Dynamic Range: 119dB, A-weighted
Output Impedance: 30Ω
Power Requirements     90~240VAC, 50/60Hz, 150W
System Requirements     Mac OS X 10.5.8 and above
Dimensions (WxDxH)     19 x 11.5 x 3.5" (483 x 292 x 89mm) 

mic/line for the BLU-80, BLU-32, BLU-16.

Weight0.50 kg3.20 kg4.00 kg1.00 kg2.50 kg1.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.50 kg
Weight 3.20 kg
Weight 4.00 kg
Weight 1.00 kg
Weight 2.50 kg
Weight 1.00 kg

FREE SHIPPING THROUGHOUT GREECE

for purchases over 99€ and up to 50kg
For remote areas and islands, the shipping expenses are till the first transshipment

Artsound Newsletters

Be the first to get our exclusive offers
© 2024 Artsound and Lights. All rights reserved.
Click outside to hide the comparison bar
Compare