Work ESD 10K Automatic Voltage Regulator

814.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Work ESD 10K Automatic Voltage Regulator It is a voltage regulator able to keep always constant the power supply in 220V (or 110 V in the additional connector) when the voltage oscillates in a margin from 140 to 250V ( 220 V input) or 60 to 130 V (110 V input) and connected to a […]

 

Read more

Work ESD 10K Automatic Voltage Regulator

It is a voltage regulator able to keep always constant the power supply in 220V
(or 110 V in the additional connector) when the voltage oscillates in a margin
from 140 to 250V ( 220 V input) or 60 to 130 V (110 V input) and connected to
a fix load of 10.000W. The need to keep a stable main voltage, above all for
systems or goods which performing depends on this value, it conserves these
regulators in an appreciated auxiliary device, when we have to supply mixers
effect appliances, etc. The incorporate 2 high brightness displays allow to read
clearly, working conditions, like input, output and main voltage. With the finality
to avoid parasite noise proceeding of the main switch, these units dispose of a
delay in the adjustable switching of 3 or 6 seconds, afterwards it runs in working
normal mode. In the protection section, both devices include protection against a
higher input voltage (255V), overheat and excess of output voltage. In these cases
the unit will switch off, transmitting an acoustic signal and a message in the display.
It disposes of a precise switch in the output voltage which allows to adjust this
parameter from a 1% to 3%.In the front panel, this unit disposes of a 63 A circuit breaker.
In the rear side are placed input/output connection CEE 32 A 3 pole. 1 additional
schucko output for 220 V and another for 110 V.
This unit is cooled by fan.

Technical Specifications:

Power supply: 140V- 250V AC.
Maximum joint load: 10000 VA.
Delay, selectable: 3 or 6 seconds .
Precision of output tension, selectable: 1% – 3%
Protections against:
Excessive temperature of 95 C
High input level
Overload
Dimensions: 460×305 x 260 mm

Weight 20.00 kg

Reviews

There are no reviews yet.

Be the first to review “Work ESD 10K Automatic Voltage Regulator”

Your email address will not be published. Required fields are marked *

Quick Comparison

Work ESD 10K Automatic Voltage Regulator removeZero88 Switch 6 Schuko DMX 6 Channels Digital Switcher removeWORK WDP 633 63A THREE-PHASE POWER SPLITTER RACK removeSHOWTEC 90413U Chassis 230V/240V VDE Connector 16A IP44 removeEurolite SB-1100 Power Distributor In 32A - 2x(5x16A)+ 6x16A Schuko 19" -USED- removeWORK WDP 163 3PHASE 16A RACK POWER SPLITTER remove
NameWork ESD 10K Automatic Voltage Regulator removeZero88 Switch 6 Schuko DMX 6 Channels Digital Switcher removeWORK WDP 633 63A THREE-PHASE POWER SPLITTER RACK removeSHOWTEC 90413U Chassis 230V/240V VDE Connector 16A IP44 removeEurolite SB-1100 Power Distributor In 32A - 2x(5x16A)+ 6x16A Schuko 19" -USED- removeWORK WDP 163 3PHASE 16A RACK POWER SPLITTER remove
Image90413u_chassis vde connector blue chassissb-1100 eurolite power distributer 32A to 16a
SKUESD 10KSWITCH6SCHUKWPD 63390413USB-1100WDP 163
Rating
Price 814.00 incl. GR VAT 1,245.46 incl. GR VAT 664.01 incl. GR VAT 2.20 incl. GR VAT 438.94 incl. GR VAT 335.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

In stock

In stock

Only 1 left in stock

In stock

AvailabilityAvailable on backorderAvailable on backorderIn stockIn stockOnly 1 left in stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Work ESD 10K Automatic Voltage Regulator

It is a voltage regulator able to keep always constant the power supply in 220V
(or 110 V in the additional connector) when the voltage oscillates in a margin
from 140 to 250V ( 220 V input) or 60 to 130 V (110 V input) and connected to
a fix load of 10.000W. The need to keep a stable main voltage, above all for
systems or goods which performing depends on this value, it conserves these
regulators in an appreciated auxiliary device, when we have to supply mixers
effect appliances, etc. The incorporate 2 high brightness displays allow to read
clearly, working conditions, like input, output and main voltage. With the finality
to avoid parasite noise proceeding of the main switch, these units dispose of a
delay in the adjustable switching of 3 or 6 seconds, afterwards it runs in working
normal mode. In the protection section, both devices include protection against a
higher input voltage (255V), overheat and excess of output voltage. In these cases
the unit will switch off, transmitting an acoustic signal and a message in the display.
It disposes of a precise switch in the output voltage which allows to adjust this
parameter from a 1% to 3%.In the front panel, this unit disposes of a 63 A circuit breaker.
In the rear side are placed input/output connection CEE 32 A 3 pole. 1 additional
schucko output for 220 V and another for 110 V.
This unit is cooled by fan.

Technical Specifications:

Power supply: 140V- 250V AC.
Maximum joint load: 10000 VA.
Delay, selectable: 3 or 6 seconds .
Precision of output tension, selectable: 1% - 3%
Protections against:
Excessive temperature of 95 C
High input level
Overload
Dimensions: 460x305 x 260 mm

Zero88 Switch 6 Schuko DMX 6 Channels Digital Switcher

Cost effective 19" dimmer

The Rack 6 is an economical choice for those wanting a rack mount DMX dimmer. Housed in a compact 2U unit the Rack 6 offers users six 10 amp circuits of dimming control. Using the latest electronic and electrical designs the Rack 6 offers real value for money. All operator controls are available through a simple, intuitive interface.

The Rack 6 is not limited in features however. Offering 12 memories, a preheat per channel, three dimmer curves and Chilli-Net compatibility the Rack 6 offers users sophistication not usually found in a dimmer in this price range.

With a range of socket options, CE certification and a three year warranty the Rack 6 is the ideal choice for users looking for a cost effective touring dimmer.


The Switch 6 is physically identical to the Rack 6, except that each channel is controlled by a heavy duty relay, instead of a dimming circuit. Ideal for switching non-dimmable loads, the Switch 6 is available with the same socket options as the Rack 6.

Features
  • 3 dimmer curves (normal, linear, switch)
  • 12 Memories
  • Preheat per channel
  • International socket options
  • 6 x 10 Amps
  • MCB per channel
  • Advanced heatsink and fan cooling
  • DMX addressing via user interface
  • 19"
  • Built in termination circuit for DMX
  • ChilliNet enabled
  • RDM hardware ready
  • Dimensions - 88mm x 483mm x 360mm
  • Weight - 8.0kg

This is a 63A three-phase power splitter with 3x 63A/400V input and 4 CEE 3x 32A/400V output.
Each output is protected by a 32A multi9 circuit breaker and each phase can be read out by a
4-digit voltimeter as well as 4-digit ammeter. Furthermore, a residual current circuit breacker is
used for protection against electronic shock under fault conditions.

Electrical Specifications and Connections Rated Current (A) 16 A Flashover Voltage 250 V Pins 3 Minimum Wire Size 0.75 mm² Maximum Wire Size 1.5 mm² Mechanical Specifications Length (mm) 50 mm Height (mm) 65 mm Width (mm) 5 mm Mounting Size 50 x 50 mm Weight 0.06 kg IP Rating IP44 Housing Plastic Colour Blue Product Properties Pin Connection Screw Terminal Contact Type Brass
Eurolite SB-1100 Practical 32 A distributor in 19" housing Practical 32 A distributor in 19" housing Specially designed for larger distribution needs 3 U necessary for installation 32 A three phase current input via 1.5 meter long 5 x 6 mm?² power cable and plug 32 A three phase current output via mounted plug secured on the back panel by a fault current circuit breaker The entire distributor is secured via 30 mA fault current circuit breaker 2 mounted CEKON sockets with 16 A on the front panel, secured via 3 x 16 A fuse blocks Control lamps indicate each phase 6 safety sockets on the housing back (2 per phase) Each pair of safety sockets feature fuse protection via 16 A automatic circuit breakers With earthing screw in order to ground a rigg if necessary Power supply: 380-400 V AC, 50 Hz ~ Max. output/channel (safety socket): 3680 W Max. current/channel (safety socket): 16 A Max. output/phase: 7360 W Max. current/phase: 32 A Height: 3 U Dimensions (LxWxH): 482 x 295 x 132 mm Weight: 6.9 kg

This is a 16 A three-phase power splitter with 1 PCE 3x 16A/400V input and 6 Schuko 16A output.
Each phase output(2 Schuko, 16A) is protected by a 16A circuit breaker and can be read out by a
4-digit voltmeter as well as 4-digit ammeter. Additionally, a protected Schuko is provided for plugging
in power.

Weight20.00 kg8.00 kg9.50 kg0.10 kg6.90 kg3.80 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 20.00 kg
Weight 8.00 kg
Weight 9.50 kg
Weight 0.10 kg
Weight 6.90 kg
Weight 3.80 kg