| Content |
Work ESD 10K Automatic Voltage Regulator
It is a voltage regulator able to keep always constant the power supply in 220V
(or 110 V in the additional connector) when the voltage oscillates in a margin
from 140 to 250V ( 220 V input) or 60 to 130 V (110 V input) and connected to
a fix load of 10.000W. The need to keep a stable main voltage, above all for
systems or goods which performing depends on this value, it conserves these
regulators in an appreciated auxiliary device, when we have to supply mixers
effect appliances, etc. The incorporate 2 high brightness displays allow to read
clearly, working conditions, like input, output and main voltage. With the finality
to avoid parasite noise proceeding of the main switch, these units dispose of a
delay in the adjustable switching of 3 or 6 seconds, afterwards it runs in working
normal mode. In the protection section, both devices include protection against a
higher input voltage (255V), overheat and excess of output voltage. In these cases
the unit will switch off, transmitting an acoustic signal and a message in the display.
It disposes of a precise switch in the output voltage which allows to adjust this
parameter from a 1% to 3%.In the front panel, this unit disposes of a 63 A circuit breaker.
In the rear side are placed input/output connection CEE 32 A 3 pole. 1 additional
schucko output for 220 V and another for 110 V.
This unit is cooled by fan.
Technical Specifications:
Power supply: 140V- 250V AC.
Maximum joint load: 10000 VA.
Delay, selectable: 3 or 6 seconds .
Precision of output tension, selectable: 1% - 3%
Protections against:
Excessive temperature of 95 C
High input level
Overload
Dimensions: 460x305 x 260 mm
| Adam Hall Cables 87471
19" Power Strip 1U 8-way with switch
Mains Distribution Unit 19"/1 U
- Illuminated 2-pole switch on the front panel
- 8 mains outlets on the rear panel
- Black aluminium housing
- 54 mm deep
- 19 "angle can be mounted in four positions
Product type
19" rack mains socket strips
Number of outlets (Earthing contact / IEC 7/4)
8, Rotated 45°
Cable connector
angled, Earthing contact (CEE 7/7)
Cabinet material
Aluminium, Plastic
Other features
Illuminated on / off switch, Mounting brackets can be used in 4 positions
|
DJ-Switch 10
10 channel switchboard. Schuko outlets on backside 5 A per channel. 15 A total load. Fuses on frontpanel.
| PSA-631
With Ampere Meter
Bring safety on stage! Power is the most important chain for a successful show on any stage. Showtec developed together with leading rental companies the power distributors that will keep your power and equipment save. The PSA-631 gives you real-time voltage and amperage information during your show. Now you can monitor your setup and make sure that the power is correctly distributed at all times.
SpecificationsFront:
• Digital voltage & amperage-monitoring
per Phase.
• Residual current circuitbreaker
FI 63A 4 pol. 0,03A
• 4 x 32A ʽC' automatic fuses.
Back:
• Input: 1,5 m (5 wires) cable with
CEE-socket 3 x 63A
• Output: 4 pcs. CEE 3 x 32A socket
Dimensions: 19" rackmount/3U
Weight: 9,5 kg | POWER SPLITTER
- Box connection phase separetor.
- Power Input: 380 V with connector CEE 3x16A (P+N+E).
- 6 schuko output with phase indicator.
- Dimensions: 220 x 150 x 102 mm.
- Weight: 1,8 kg. | ESD 5K Automatic Voltage Regulator
Automatic tension regulator. For a tension between 120 V. and 250 V. Maintains the output to 220 V.
Max. load 5.000 W. Input and output connections through bananas. Schuko base output auxiliar regulated.
(max. 2.500 W.). Digital display with information of the input tension, output tension, current and protection.
The protection works by overload or an excesive temperature emitting a sound of advise and disconnecting
the load. It has in its rear panel an auxiliar shuko plug.
Dimensions: 230 x 220 x 370 mm. Weight: 16, 3 kgs. |
Reviews
There are no reviews yet.