| Description | | PRO DMX merger to combine 2 DMX signals into 1
- Pro DMX merger with 2 DMX inputs and 1 DMX output
- Enables two separate consoles to control one DMX system
- DMX modes: LTP, HTP, merge or backup
- Input B can be set to a start address (offset)
- LED indicator for valid DMX signals
- Selectable output frequency 22 Hz/44 Hz
- Built with NEUTRIK connector
- Made in Germany
- For application areas such as: Stage
|
- 1024 DMX channels in live mode, 512 DMX channels in stand-alone mode
- Expandable from 2 to 4 DMX512 universes (2048 DMX channels)
- Intuitive backlit keyboard with 10 buttons for direct access
- 99 scenes across 5 zones and calendar triggering (only possible with optional ESApro 2 software)
- USB and Ethernet for programming/control
- User-friendly, intuitive Cameo DMX software "by Daslight" for Windows and Mac OS X as a free download
- Smart Upgrade Technology (SUT)
| | MagicDMX is an economic, single universe USB to DMX interface in two versions, Basic and Full. It is designed to be used with the free MagicQ software as a way to practice programming and demo the MagicQ software using actual moving lights.; Output or input one universe of DMX - not time limited. Can be used as a DMX test device.
- One Universe DMX output
- 5 pin female XLR
- USB-C connector
- Basic electrical protection
- LED status indicator
| |
| Content | Μετατροπέας Artnet σε DMX ( 2 universes ). Διαστάσεις: 86,3 x 42 x 67 mm.
Receiver / converter ArtNet-DMX and ArtNet nodes
2. Technical Data
● DMX receiver via Ethernet Plug & Play.
● Compatible with LightMouse LM-3E.
● Art-Net 2 Node.
Dimensions (Width x Height x Depth): 86 x 42 x 68 mm.
Power supply: 5V 500 mA
It is a receiver / converter ArtNet-DMX and ArtNet nodes, this, is able to interpret information from a DMX frame sent by the network and make it DMX information to control devices such as spotlights, moving heads, etc.
Its configuration is simple, just selecting with the rotary wheel the same number that is selected in the transmitter (LM 3E) to establish both communication and send out / receive the same DMX universe. The connection possibilities are huge, whether in a facility that needs to send a single universe from one location to another, send multiple universes, or even send a single universe to two different areas, using one transmitter and two receivers.
LM 3R2 is a ArtNet node with two DMX universes (1024 channels), is fully compatible with other devices, you can receive the two universes either by two emitters LM 3E or from a multiverse console via Artnet. Configuration will set which universe is the first, automatically, setting the following universe as the second to control.
In Art-NET mode, the device can be controlled by any software capable of generate Art-NET, i.e.
Chamsys MagicQ or using a DMX to ArtNet interface as LM 3E
In all cases, use the SubNet/Universe switches (7) to set the device according to the right connection
and the chosen universe to be controlle. |
| Power supply: |
100-240 V AC, 50/60 Hz
12 V DC 1 A |
| Power consumption: |
1 W |
| Power connection: |
Mains input via 4-pin screw plug connector (M) mounting version power supply cord with AC adapter (provided) |
| DMX input: |
2 x 3-pin XLR (M) mounting version |
| DMX output: |
1 x 3-pin XLR (F) mounting version |
| Use of brands: |
Built with NEUTRIK connector |
| Dimensions: |
Width: 13 cm
Depth: 7 cm
Height: 4,1 cm |
| Weight: |
500 g |
|
- 2 x DMX512 universes in live mode (computer / tablet) and standalone mode
- Expandable from two to four DMX512 universes (2048 DMX channels)
- Intuitive illuminated keypad with 10 buttons for direct scene recall
- 99 Scenes on 5 zones
- USB and Ethernet for programming / control
- 16 Dry contact ports via HE20 connectors
- User-friendly, intuitive Cameo DMX software "by Daslight", free download for Windows and Mac OS X available
- Advanced triggering options (TCA)
- Smart upgrade technology (SUT)
- Live operation: 1024 channels
- Standalone operation: 1024 channels
- Software mode: Cameo D 4 / Daslight DVC 4 (fully supported)
- Operating systems: Android, iOS, Mac OS, Windows
- Inputs: Ethernet, USB-C
- Outputs: Ethernet
- Memory: microSD, SDHC (32 GB max)
- Power supply: 5 - 5.5 V DC 0.6 A
- IP protection type: IP20
- Dimensions (W x H x D): 160 x 90 x 45 mm
- Weight: 0.3 kg
- Colour: Grey
|
Work C 72 DMX
CD 72 DMX is a DMX to Analog signal converter suitable for 72 analog channels.
It converts DMX and MIDI signals into analog signals. It allows using an analog dimmer with DMX consoles, setting parameters like DMX start address channel, MIDI note selection, etc.
It also works as a chaser with adjustable speed to record and program scenes from a DMX console. With its Hold function, it provides memory against current failures that maintain the last DMX configuration.
C 72 DMX sends analog signals through SUB-25 connectors. Their input voltage can be set (from DC +10V, DC +15V or DC +20V) with DIP switches. Polarity can be switched too.
DMX to analog signal converter.
Adjustable voltage level for outputs (DC 10, 15, 20 V).
Voltage polarity selector.
72 channel chaser operating mode.
Programmable DMX start address channel.
Programmable chase speed.
Memory against current failures.
Main supply: 230 V AC 50 Hz.
Dimensions (WxHxD): 483 x 44 x 120 mm.
Weight: 2.3 kg.
|
Hardware Specifications:
- DMX Port(s): 1
- RDM Support: Yes
- USB Port(s): 1 (USB-C)
- Unlocks ‘demo mode features: No
- Time Restriction: No
Software Specifications:
- Universes: 64
- Channels: 32,768
- Number of fixtures: upto 32,768
- Cues: 5000
- Cue stacks: 2000
- Palettes: 4096
- Groups: 5000
- Media server support: 50 (each different content)
MagicQ features restricted when using MagicDMX Interfaces:
- Execute Window full screen
- Scheduled Events and Automations
- iOS / Android Remote app
- 10Scene Gateway and 10Scene remote app
- Remote Control Protocol (serial, or network)
- Web Server editing (viewing is supported)
- Auto starting Playbacks
- Startup in full screen / saved window positioning
- Playback Synchronisation
- Multi Programming including Net Sessions
- Triggering of playbacks using DMX input
- Mouse control of pan/tilt (only supported when connected to a MagicQ Wing with encoders)
- Audio control and playback synchronisation with Winamp (this is supported when connected via network to a MagicQ console)
- Timecode receive from ArtNet
- Midi Notes & Timecode from 3rd Party USB/Virtual interfaces.
- Audio input from PC/Mac sound card
Cased Weights and Dimensions:
- Width:135mm (5.3”)
- Depth: 93mm (3.6”)
- Height: 38mm (1.4”)
- Weight (MagicDMX Inside case): 0.1kg (0.22lbs)
| The Cameo CLSB83 is the professional solution for configuring DMX networks. The splitter and booster in 19" format amplifies the DMX input signal and distributes it to 8 electrically isolated outputs. It is connected directly to the DMX controller or to DMX devices. The input and the THRU socket for looping of the signal are duplicated on the front and back of the CLSB83 and connected in parallel. Bright LEDs show the DMX and power status of the channels on the front panel, the outputs are located on the back. A switchable 120 Ohm terminating resistor on the DMX THRU output and the power switch complete the equipment; the IEC-cable is supplied. For convenient output connector access and reverse installation the rack-mount angles can be attached to the rear of the chassis.
The Cameo DMX splitter and booster is also available in 5-pin design (art. No CLSB85).
- Type: DMX 512 protocol
- DMX Inputs: 2 (parallel)
- DMX Input Connectors: 3-pin XLR male
- DMX Thru Outputs: 2 (parallel)
- DMX Thru Output Connectors: 3-pin XLR female
- DMX Outputs: 8 (electrically isolated)
- DMX Output Connectors: 3-pin XLR female
- Controls: Power On/Off, DMX Thru Terminator
- Indicators: 8 x Power LED, 8 x Signal LED
- Power Socket: IEC power socket
- Power Supply: transformer
- Operating Voltage: 230 V AC, 50 Hz
- Power Consumption (max.): 15 W
- Dimensions (W x H x D): 483 x 44 x 160 mm
- Accessories included in package: power cord
|
Reviews
There are no reviews yet.