Content |
Work Unidim 2 One Channel Dimmer DMX 512
One channel dimmers with built-in drivers are on the increase in the spectacular lighting industry because of their multiple applications and easy use.
UNI DIM 2 is the second reference from Equipson?s catalogue with these characteristics.
With a weight of 1 Kg., this 10 A compact device with 1 DMX channel allows you to control any lighting apparel due to an easy configuration system, accessible trough three control buttons and a Led display.
The new UNI DIM 2 allows you to set the DMX address, the maximum output level, and brings you the possibility to manually control dimmering, even using it as a switch panel, multiplying his applications.
A security power output, a small size and tiny weight, and a specific design facilitates it?s installation on walls, roofs and structures where lighting controls doesn?t need to be complicated.
Its autonomy allows using UNI DIM 2 as a lighting support in already configured installations.
Characteristics:
- 1 DMX channel Dimmer Pack
- 10 A power output
- Possibility to operate like driver unit
- Configuration of DMX adress, upper limit and prefixed value.
- Local dimmer control
- Upper plate for fixation elements
- Dimensions: 230 x 95 x 70 mm
Technical Specs.:
Power supply 230V AC, 50 Hz ~
Max. power output 2300W
Max. total current 10 A
Number of channels 1
Output socket 1 safety power outlet
DMX output 3 pin XLR-mounting-plug
DMX input 3 pin XLR-mounting-jack
Dimensions 230 x 95 x 70 mm.
Weight 1 Kg.
|
- Can be loaded with 4.5 A per channel
- Total load: 16 A
- 3-Pin DMX input and output
- Protective contact Sockets on the side with protective flaps (blue)
- LED display with membrane keyboard
- Built-in microphone with sensitivity control for stand-alone mode
- Individual DMX addressing per channel
- Pre-programmable chaser (running light)
- Integrated chaser with speed control
- Dimensions (W x D x H): 20 x 6.5 x 18 cm
- Weight: 1.6 kg
- Made in Europe
| Specifications: DMX controller
Input voltage: DC12~24V
Max output current: 8A (each channel)
Max output power: 288W~ 576W
Output: 3CH
Connection mode: Common Anode(+)
Material: Metal
Product size: 16.5 * 6.5 * 4cm/ 6.5 * 2.6 * 1.6in
Product weight: 310g/ 10.9oz
Package size: 18 * 7.7 * 5cm/ 7.1 * 3.0 * 2.0in
Package weight: 400g/ 14.1oz
Package list:
1 * DMX512 Decoder
Applications: Neccessary conversions of DMX to PWM signals for driving LEDs
Function: Control 3 channel 12VDC LED products or any one RGB LED Light Bar or Strip using DMX console or standalone mode with onboard DIP switches
Operating Voltage: 12~24 Volts DC (use only 12VDC power with 12VDC LEDs)
Connection Mode: Common Anode (+)
Output: Three CMOS output RGB
Maximum Load Current: 8 Amps/channel (12 Amps total)
Output Power: 144 Watts
Overall Size: (L)166 X (W)67 X (H)41 mm
Control Method: DMX512 RJ45 / DMX512 3-pin XLR / Standalone DIP switches
Standalone Modes: 9 total (7 static and 2 dynamic) see desc. below
Operating Temperature: -25~60°C | The DIM-4 is a compact but powerful dimming pack. It has 4 channels which each can be loaded up to 3A Each. With a total power consumption of 8A this dimming pack can fit any socket. The DIM-4 can be fully controlled by DMX but has as well an built in chaser as well a sound-control function. For easy use in any location the DIM4LC has 4 local control faders which makes it a powerful and compact dimming pack for numerous applications.
- Music-controlled
- Schuko Outlets
- DMX-512 4CH. Dimmer pack
- Local Control Faders
- Stand-alone function
Input voltage: 230V/50Hz Channel Output: 3A / CH., Total 8A Control: DMX-512, Stand-alone, Music control, Local Control. DMX channels: 1,2 or 4 Mode: Dim or Switch Data in/out: 3 pole XLR Powerconnection: Shuko plug Poweroutput: Schuko chassis per channel Monitor: control LED per channel, DMX signal led Dimensions: 220 x 82 x 275 mm (LxWxH) Weight: 3,5 kg
|
Control principle |
Leading edge phase control |
|
Control protocol |
DMX512 |
|
Input connections |
Signal input |
XLR chassis plug, 3-pin |
Output connections |
Signal output |
XLR chassis socket, 3-pin |
Channel fuse |
4 × 5 mm × 20 mm, 6,3 A, 250 V, fast-acting |
|
Operating supply voltage |
230 V 50 Hz |
|
Protection class |
IP20 |
|
Dimensions (W × H × D) |
260 mm × 210 mm × 53 mm |
|
Weight |
2.6 kg |
|
Ambient conditions |
Temperature range
Relative humidity |
0 °C…40 °C
50 %, non-condensing |
|
Feature: - 4 channels outputs to dim 0-10V fluorescent lamps or incandescent lamps. Switch mode available to control non-dim lamps.
- DMX-512/EDX
- Din-rail mounting.
- 6 Scenes can be stored and recalled by ECP control panels.
- Up to 99 zones setting.
- Can set the OFF time for AC OUT power from 1 second to 99 seconds.
- Can set the fade time for each scene.
Specifications:
- Power:AC 100-240V
- Protocol:DMX-512/1990, EDX
- Output:4 channels, 5A per channel max. Total 12A max
- DMX Signal Connector:6P6C Phone Jack x2, 4PIN Terminal x1
- Dimension:190(W)*88(H)*57(D)mm
- Weight:590g
|
Reviews
There are no reviews yet.