AKG C 414-XLII/ST Matched Pair

2,100.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Complete With Stereo Bar, Windshield’s and Cradle’ The C 414 B-XL II/ST is especially useful for stereo recordings taken from the far field with the inclusion of useful and often valuable room acoustics. The matched pairs consist of two microphones that are within 1 dB to each other in sensitivity and also within 1 dB […]

 

Read more

Complete With Stereo Bar, Windshield’s and Cradle’

The C 414 B-XL II/ST is especially useful for stereo recordings taken from the far field with the inclusion of useful and often valuable room acoustics. The matched pairs consist of two microphones that are within 1 dB to each other in sensitivity and also within 1 dB to each other in the range of 300 Hz to 8,000 Hz of the individual frequency response when used in cardioid mode and are selected from a large quantity of individual microphones using the described criteria by using a proprietary computer program.

Using this matched pair for stereo recordings utilizing various techniques will provide for a good and stable balance without frequency-dependent shifting of the stereo panorama.

The kit comes complete in an all-metal ‘Soundtool’ Hard Shell road case with 2 x AKG H-85 shock mounts, 2 x W414X external windscreens, an H50 stereo bar and an individually-measured chart showing the response curve of the microphone. See www.dv247.com Alternative Products and Related Products on this page for your options.

The C 414B-XLII has been carefully designed to maintain the legendary sonic character of the C 414 family while integrating new features and performance enhancements made possible by new technology. A classic microphone with a distinctive timbre especially designed for recording of solo vocals and solo instruments.

Whats the difference between the C 414B-XLII and the C 414 B XLS? The main difference between the two current C414 models lies in their frequency responses. The C 414B-XLII has a series of presence rises between 2.5 KHz and 9 KHz. This will make any recording with this microphone brighter or more sibilant than the original sound. This upper mid range boost is quite helpful on vocals and certain instruments such as classical acoustic guitars using nylon or natural strings. The C 414B XLS, see www.dv247.com Alternative Products on this page, has a very flat response that will not color the original sound which is important especially in instrumental recordings. It more suited for general use.

The microphone’s 5 pickup patterns are easily selectable via an electronic switch with LED indication and offer the selection of omnidirectional, cardioid wide cardioid, hyper cardioid and figure-eight patterns. The pickup pattern selector switch utilizes a dual-color LED indicator that provides visual indication of the pattern selected and also changes from green to red to indicate if the microphone’s output electronics are being overloaded. The pattern selector can also be used to “lock” the microphone’s switch settings by pressing and holding it for 3 seconds. On the rear of the microphone, an electronic switch allows the selection of -6, -12 and -18 dB pre-attenuation levels which are accomplished by changing the polarization voltage to the capsule. The C 414B-XLII has switchable bass cut filters of 12 dB-per-octave at 40 Hz and 80 Hz, and a 6 dB-per-octave filter at 160 Hz for control of proximity effect. On-axis sensitivity for all patterns is 23 mV/Pa and its self-noise is an extremely low 6 dB-A.

The C 414B-XLII has a transformerless output and all-metal chassis, making it immune to electrical interference and RF from digital equipment, video monitors and wireless systems.

Features:

  • High sensitivity and extremely low self noise
  • Five switchable polar patterns for placement and application flexibility
  • Two-color LEDs provide quick visual indication of selected polar pattern and output overload
  • Elastic capsule suspension greatly minimizes structurally-transmitted noise from chassis vibration
  • Supplied with Hard Shell road case with 2 x AKG H-85 shock mounts, 2 x W414X external windscreens and an H50 stereo bar
  • High sound pressure level capability, 140 – 158dB, and wide dynamic range
  • Completely immune to electrostatic and electro-magnetic interference from digital gear, computer monitors, etc. thanks to solid metal housing and transformerless output stage
  • Three switchable bass cut filters and three pre-attenuation pads with LEDs for quick visual indication
  • All switchable components operate in low impedance circuits for ultra-high relability even in extremely humid conditions

Specifications:

  • Type: 1″ large diaphragm pressure gradient microphone
  • Polar Patterns: Omnidirectional, wide cardioid, cardioid, hypercardioid, figure eight
  • Frequency Range: 20 to 20,000 Hz
  • Sensitivity: 23 mV/Pa (-33 dBV) +/-0.5 dB
  • Max. SPL: 140/146/152/158 dB SPL (at 0/-6/-12/-18 dB)
  • Preattenuation Pad: -6, -12,-18 dB, switchable
  • Bass Cut Filter Scope: 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz
  • Impedance: = 2,200 ohms
  • Supply voltage: 48 V phantom power to DIN/IEC
  • Current consumption: Approximately 4.5 mA
  • Dynamic range: 134 dB minimum
  • Environment Temperature range: -10° C to +60° C (14° F to 140° F)
  • Relative humidity: 95% (+20° C/68° F), 85% (+60° C/140° F)
  • Connector: 3-pin XLR to IEC
  • Dimensions: 50 x 38 x 160 mm (2.0 x 1.5 x 6.3 in.)
  • Net weight 300 g (10.6 oz.)

 

Weight 2.00 kg

Reviews

There are no reviews yet.

Be the first to review “AKG C 414-XLII/ST Matched Pair”

Your email address will not be published. Required fields are marked *

Quick Comparison

AKG C 414-XLII/ST Matched Pair removeSHURE PGA52-XLR - Kick Drum Microphone 30Hz to 13kHz removeDAP AUDIO D1301 PL-07 Instrument Dynamic Microphone removeSENNHEISER E-906 SUPER-CARDIOID DYNAMIC MICROPHONE removeLD Systems LDWS1000MW Wind / Percussion Instrument Clip Microphone removeSHURE BETA-57A - Instrument Microphone 50Hz to 16kHz remove
NameAKG C 414-XLII/ST Matched Pair removeSHURE PGA52-XLR - Kick Drum Microphone 30Hz to 13kHz removeDAP AUDIO D1301 PL-07 Instrument Dynamic Microphone removeSENNHEISER E-906 SUPER-CARDIOID DYNAMIC MICROPHONE removeLD Systems LDWS1000MW Wind / Percussion Instrument Clip Microphone removeSHURE BETA-57A - Instrument Microphone 50Hz to 16kHz remove
ImageSHURE BETA-57A - Instrument Microphone 50Hz to 16kHz
SKUC 414-XLII STPGA52-XLRD1301H10SE00105LDWS1000MWBETA57A
Rating
Price 2,100.00 incl. GR VAT 165.12 incl. GR VAT 43.39 incl. GR VAT 189.00 incl. GR VAT 108.04 incl. GR VAT 175.00 incl. GR VAT
Stock

Available on backorder

Only 5 left in stock

In stock

In stock

Available on backorder

Only 1 left in stock (can be backordered)

AvailabilityAvailable on backorderOnly 5 left in stockIn stockIn stockAvailable on backorderOnly 1 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Complete With Stereo Bar, Windshield's and Cradle'

The C 414 B-XL II/ST is especially useful for stereo recordings taken from the far field with the inclusion of useful and often valuable room acoustics. The matched pairs consist of two microphones that are within 1 dB to each other in sensitivity and also within 1 dB to each other in the range of 300 Hz to 8,000 Hz of the individual frequency response when used in cardioid mode and are selected from a large quantity of individual microphones using the described criteria by using a proprietary computer program.

Using this matched pair for stereo recordings utilizing various techniques will provide for a good and stable balance without frequency-dependent shifting of the stereo panorama.

The kit comes complete in an all-metal 'Soundtool' Hard Shell road case with 2 x AKG H-85 shock mounts, 2 x W414X external windscreens, an H50 stereo bar and an individually-measured chart showing the response curve of the microphone. See www.dv247.com Alternative Products and Related Products on this page for your options.

The C 414B-XLII has been carefully designed to maintain the legendary sonic character of the C 414 family while integrating new features and performance enhancements made possible by new technology. A classic microphone with a distinctive timbre especially designed for recording of solo vocals and solo instruments.

Whats the difference between the C 414B-XLII and the C 414 B XLS? The main difference between the two current C414 models lies in their frequency responses. The C 414B-XLII has a series of presence rises between 2.5 KHz and 9 KHz. This will make any recording with this microphone brighter or more sibilant than the original sound. This upper mid range boost is quite helpful on vocals and certain instruments such as classical acoustic guitars using nylon or natural strings. The C 414B XLS, see www.dv247.com Alternative Products on this page, has a very flat response that will not color the original sound which is important especially in instrumental recordings. It more suited for general use.

The microphone's 5 pickup patterns are easily selectable via an electronic switch with LED indication and offer the selection of omnidirectional, cardioid wide cardioid, hyper cardioid and figure-eight patterns. The pickup pattern selector switch utilizes a dual-color LED indicator that provides visual indication of the pattern selected and also changes from green to red to indicate if the microphone's output electronics are being overloaded. The pattern selector can also be used to "lock" the microphone's switch settings by pressing and holding it for 3 seconds. On the rear of the microphone, an electronic switch allows the selection of -6, -12 and -18 dB pre-attenuation levels which are accomplished by changing the polarization voltage to the capsule. The C 414B-XLII has switchable bass cut filters of 12 dB-per-octave at 40 Hz and 80 Hz, and a 6 dB-per-octave filter at 160 Hz for control of proximity effect. On-axis sensitivity for all patterns is 23 mV/Pa and its self-noise is an extremely low 6 dB-A.

The C 414B-XLII has a transformerless output and all-metal chassis, making it immune to electrical interference and RF from digital equipment, video monitors and wireless systems.

Features:

  • High sensitivity and extremely low self noise
  • Five switchable polar patterns for placement and application flexibility
  • Two-color LEDs provide quick visual indication of selected polar pattern and output overload
  • Elastic capsule suspension greatly minimizes structurally-transmitted noise from chassis vibration
  • Supplied with Hard Shell road case with 2 x AKG H-85 shock mounts, 2 x W414X external windscreens and an H50 stereo bar
  • High sound pressure level capability, 140 - 158dB, and wide dynamic range
  • Completely immune to electrostatic and electro-magnetic interference from digital gear, computer monitors, etc. thanks to solid metal housing and transformerless output stage
  • Three switchable bass cut filters and three pre-attenuation pads with LEDs for quick visual indication
  • All switchable components operate in low impedance circuits for ultra-high relability even in extremely humid conditions

Specifications:

  • Type: 1" large diaphragm pressure gradient microphone
  • Polar Patterns: Omnidirectional, wide cardioid, cardioid, hypercardioid, figure eight
  • Frequency Range: 20 to 20,000 Hz
  • Sensitivity: 23 mV/Pa (-33 dBV) +/-0.5 dB
  • Max. SPL: 140/146/152/158 dB SPL (at 0/-6/-12/-18 dB)
  • Preattenuation Pad: -6, -12,-18 dB, switchable
  • Bass Cut Filter Scope: 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz
  • Impedance: = 2,200 ohms
  • Supply voltage: 48 V phantom power to DIN/IEC
  • Current consumption: Approximately 4.5 mA
  • Dynamic range: 134 dB minimum
  • Environment Temperature range: -10° C to +60° C (14° F to 140° F)
  • Relative humidity: 95% (+20° C/68° F), 85% (+60° C/140° F)
  • Connector: 3-pin XLR to IEC
  • Dimensions: 50 x 38 x 160 mm (2.0 x 1.5 x 6.3 in.)
  • Net weight 300 g (10.6 oz.)

 

OVERVIEW

Cardioid dynamic kick drum mic with swivel mount and cable.

The PGA52 is a professional quality kick drum microphone with an updated industrial design that features a black metallic finish and grille offering an unobtrusive visual presence. Legendary Shure quality construction ensures exceptional performance in rigorous environments.

Additional design highlights include a swivel joint featuring a quick-release latch similar to bicycle component-locking technology for extremely quick and easy positioning.

FEATURES
  • Mountable microphone featuring swivel joint with quick-release latch for kick drum
  • Dynamic cartridge (does not require phantom power) with cardioid polar pattern
  • Tailored cartridge design for low-frequency clarity, including on bass amps
  • Includes PGA52, zipper pouch and user guide
  • XLR to XLR mic cable included
The unidirectional dynamic microphone DAP PL-07 is ideal for live sound reinforcement and clear recording of Brass, Saxophone, Harmonica, Snare, Tom, Congas and Guitar-Bass Amps. Technical Info Type: Dynamic, Moving coil. Freq.Resp.: 40 to 16.500 Hz. Polar Pattern: Cardioid Sensitivity (1000Hz): 1,7 mV/Pa* (*1 Pa = 94 dB SPL) Max SPL: 137dB Impedance: 600 Ohm Power supply: none Connector: 3p. XLR male-type). Net. Weight: 245 g Dimensions: (Ø 32 mm x L 157 mm) Accessories: 6 mtr balanced cable with XLR plugs

The supercardioid e 906 instrument microphone was especially designed for
guitar amplifiers, but it is also an excellent choice for percussion and brass
instruments.

Features
Lively, full sound
Very fast attack
Flat shape of microphone body perfect for guitar amps 
Three adjustable sound characteristics (bright, normal, smooth)
Hum compensating coil
Rugged metal body
Delivery Includes
e 906 microphone
MZQ 100 clamp
Pouch
User manual

Technical Data
Pick-up pattern  supercardioid 
Frequency response  40...18000 Hz 
Sensitivity in free field, no load (1kHz)  2,2 mV/Pa 
Nominal impedance  350 Ohm 
Min. terminating impedance  1000 Ohm 
Dimensions  55 x 34 x 134 mm 
Weight  140 g 

LDWS1000MW User User's manual [7,20 MB]
LDWS1000MW Battery disposal informationLDWS1000MW Frequency listLDWS1000MW Frequency lists / Pin assignment Wireless SystemsLDWS1000MW Data sheet - Microphone for Brass/Wind/Percussioninstruments Wind / percussion instrument clip microphone

Linear frequency response, natural sound reproduction, lightweight, easy and stable positioning thanks to the gooseneck, very good impact sound isolation thanks to elastic capsule fastening, strong clamp providing good fastening without causing any damage to the instrument thanks to the soft rubber inner surface of the clips. Phantom Power Adapter LDPHA also available separately.

Specifications:
  • Converter Principle: Electret Condenser Microphone
  • Pick-up Pattern: Cardioid pattern
  • Frequency Response: 50 Hz – 18 kHz
  • SPL: 133 dB
  • Sensitivty: -45 dB +/- 3dB
  • Impedance: 250 Ohms +/- 30% @1kHz
  • Connections: Mini XLR – 3 pins
  • Gooseneck: 70 mm
  • Cable length: 1,5 m
  • Surface: Black matt
  • Weight: 56 g
  • Accessories: Wind protection, Phantom power adapter
Excellent for acoustic and electric instruments as well as for vocals, the extremely versatile Beta 57A dynamic microphone provides optimal warmth and presence. The Beta 57A maintains a true supercardioid pattern throughout its frequency range. This insures high gain before feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. A completely new grille design lets you take better advantage of proximity effect. The Beta 57A is an exceptionally versatile microphone. Typical applications include drums, guitar amplifiers, brass, woodwinds and vocals.
  • Tailored frequency response provides drums, guitars, vocals, and horns with studio quality sound
  • Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off-axis sound
  • Hardened steel mesh grille that facilitates use of proximity effect and resists wear and abuse
  • Neodymium magnet for high signal-to-noise ratio output
  • Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
  • Frequency response: 50 to 16,000 Hz
Suggested Applications Guitar Amp Bass Amp Acoustic Guitar Brass/Saxophone Snare Drums Rack/Floor Toms Congas Woodwinds Lead Vocals
Weight2.00 kg0.80 kg0.24 kg0.32 kg0.35 kg0.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 2.00 kg
Weight 0.80 kg
Weight 0.24 kg
Weight 0.32 kg
Weight 0.35 kg
Weight 0.50 kg