| Content |
Your music, your performance or your installation can count on FBT’s new X-LITE series of portable powered speaker systems. Constructed out of polypropylene enclosures, the X-LITE series features a sleek design including 3 x carrying handles and 4 x M10 flying points. In addition, the full front grille provides complete protection, delivering elegance and sturdiness.
Features include built-in Class D amplifier modules providing an amazing 1000W of power to satisfy the most demanding applications, whilst the user-friendly DSP allows 4 x EQ preset selection to perfectly tailor the performance of your X-LITE to your sound requirements. In addition, the X-LITE series is truly versatile, offering a professional control panel that allows you to set up configurations with or without subs. Even better – if you do want to extend the X-LITE low frequency response, you can do so with the dedicated X-SUB 18” powered subwoofer.
| The SEM 710 Plus gives you more power for your money. This starter unit features a 10' heavy duty woofer and piezo tweeter, with power handling reaching 300 Watts (Program) or 150 Watts (RMS). The SEM 710 Plus Speakers complement the Powerpods 410 and 620 Plus perfectly to form a cost-effective audio solution for FOH application.
- Double duty: use as a floor monitor or mounted as a raised sound reinforcement speaker
- Power handling: 150 Watts (RMS); 300 Watts (Program)
- Frequency response: 65 Hz ~ 20 KHz
- High sound pressure level, 96 dB SPL @ 1W / 1M
- 10' heavy-duty woofer and piezo tweeter 8 ohm nominal load
- Built-in handle
- 35 mm stand adapter built-in
- Dual 1/4' phone jacks
Cabin Type Wood
Function 2 way multi-use
Monitor Use Yes
Amplifier 150 Watts (RMS); 300 Watts (Program)
LF/MF, Woofer 10''
HF, Horn 1 ''
DSP Processor - Max SPL 96 dB
Dispersion 90x40
Frequency Response 65 Hz ~ 20 KHz
Pole mount -
Rigging -
Connector 2x1/4 jack
Dimensions 351x 491 x 314 (WxHxD)
Weight 11 Kg
Color Black |
User\'s manual
Technical drawing
- Passive 2-way bass-reflex installation speaker
- 200 W permanent load capacity
- 118 dB maximum sound-level pressure
- 10" custom woofer and 1" Celestion high-frequency driver
- Rotating CD horn with 80° x 60° dispersion
- For vertical or horizontal use
- speakON-compatible and terminal block input
- 4 x M8 mounting holes
- Shock-resistant front grille for optimum speaker protection
- Extensive range of smart accessories for installation
- Available in black or white
With its streamlined and compact design, the LD Systems SAT 102 G2 is excellently suited for permanent installation and discreet integration into virtually any setting. It features a 10" custom woofer and a 1" compression driver from Celestion, connected to a rotating CD horn with 80° x 60° dispersion. This makes the passive 2-way speaker ideal for both vertical and horizontal use.
The SAT 102 G2 attains a maximum sound-level pressure of 118 dB over a frequency response curve of 65–19 kHz with a permanent load capacity of 200 watts. The reflex casing made of 15 mm MDF has four M8 mounting holes. The inputs are a speakON-compatible socket and a terminal block, while an additional terminal block serves as an output for convenient parallel connection.
Special wall holders are available as an accessory to facilitate wall mounting. The SAT 102 G2 is available in black (Art. No. LDSAT262G2) or white textured finish (Art. No. LDSAT262G2W).
Product type
Installation Loudspeakers
Type
Wall-mounted Loudspeaker
Low/mid driver dimensions
10 "
Woofer size
254 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil (mm)
50.8 mm
Horn
CD horn
HF driver dimensions
1 "
HF Driver Size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
Celestion
Dispersion (H x V)
80 x 60 °
Load rating (RMS)
200 W
Peak power
400 W
Frequency response
65 - 19000 Hz
SPL (1W/1m)
95 dB
Max. SPL
118 dB
Impedance
8 Ohm(s)
Protection circuits
HF Driver
Loudspeaker inputs
2
Speaker input connections
Speakon compatible , terminal block
Loudspeaker outputs
1
Speaker output connections
terminal block
Cabinet material
15 mm MDF
Cabinet surface
texture paint
Cabinet colour
white
Cabinet construction
vented
Width
300 mm
Height
550 mm
Depth
270 mm
Weight
12,2 kg
| MASTER AUDIO SB250 Passive Loudspeaker 2 Way 10" 200Wrms 8 Ohm
- 2-way passive speaker box
- Impedance(Ohm) 8
- Power output 200 W RMS
- ABS box - Woofer 10“, paper cone
- Compression driver,1" titanium diaphragm
- Frequency reponse: 50 - 17KHz (-10dB)
- Sensitivity: 103 dB - Speakon input and output
- Dimension: 472 x 345 x 270 mm
|
The P2110-T is a weatherproof full range, wide-dispersion, coaxial two way loudspeaker system for small and medium size distributed systems.
The high frequency section is a constant directivity horn loaded to a 1” RCF Precision Neodymium compression driver with a 1.50” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is a 10” woofer with a 2.5” voice coil. The cabinet is equipped with 12 x M 8 brass inserts, a stainless steel U-Bracket and pair of spacers for 90° mounting.
The system features a selectable line transformer for 70 - 100 Volt applications/installations, it meets the requirements of IP 55 code (International Protection Rating)
| Features |
|---|
| Cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected and waterproof IP 55 | | Front grille in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing | | Stainless steel bracket | | One 10" high-output LF transducer with 2" voice coil | | One RCF Precision Neodymium 1" Compression Driver with 1.5" voice coil | | 90° x 40° constant directivity horn | | Built in passive crossover and selectable line transformer | | 10° X 20° enclosure sides for array configurations | | Active Mosfet Compression Driver Protection | | LICC (Low Impedance Compensated Crossover) network | |
12 brass suspension points (M8)
| Acoustical Specifications |
|---|
| Frequency Response -10 dB: | 95 Hz | ÷ 20 kHz | | Frequency Response -3 dB: | 120 Hz | ÷ 20 kHz | | Max SPL @ 1m: | 118 dB | | | Horizontal coverage angle: | 90° | | | Vertical coverage angle: | 40° | | | Directivity index; Q: | 11 | | | System Sensitivity: | 95 dB | | | Nominal Impedance: | 16 Ω | | | Power Handling: | 200 Watt | | | Peak Power Handling: | 800 Watt | | | Recommended Amplifier: | 400 | | | Protections: | Dinamyc | | | Crossover frequencies: | 2000 Hz | |
| TRANSDUCERS |
|---|
| Compression Driver: | 1.5" HF driver, 1" voice coil | | | Nominal Impedence: | 8 Ω | | | Input Power Rating: | 25 Watt AES | | | Sensitivity: | 106 dB | | | Woofer: | 10" woofer, 2.5" voice coil | | | Nominal Impedence: | 16 Ω | | | Input Power Rating: | 180 Watts AES | | | Sensitivity: | 95 dB | |
| INPUT SECTION |
|---|
| Input connector: | 5m, 4-adriges Neopren Kabel | | | Constant voltage transformer: | 70/100 | | | Power Selection: | 70V/30W ,15W , 100V/60W, 30W | |
| CABINET |
|---|
| Cabinet Material: | Polyethylene rotomoulded | | | Hardware: | 12 x M8 inserts+ U-brackets and pair of spacers | | | Grille: | Custom perforated aluminium grille with open-cell fiber and water repellent woven fabric backing | | | Colour: | Grey | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 350 / 13.78 mm/inch | | | Width: | 350 / 13.78 mm/inch | | | Depth: | 320 / 12.60 mm/inch | | | Net Weight: | 13.5 / 29.75 Kg/Lbs |
|
|
| 2-Way, 10“
High Power System |
| Characteristics |
|
Multi-angled unit, designed for Sound reinforcement or floor monitoring. |
|
Multi-use Mid-High Constant Directivity, rotateable 90x45 degrees Horn. |
|
Active driver "Power Guard" protection without any effective loss. |
|
High Sound Pressure Level, (128dB Peak@1m, pink noise with a 6dB crest-factor). |
|
Rotating Horn and optimised cabinet architecture for monitoring and small P.A. uses. |
|
Two-way passive 8 Ohm design to be used with a single power Amp channel per cabinet to obtain an easy assembly and low cost. |
|
Passive filter, which optimises the voice critical zone response. |
|
Double input NL-4 Neutrik connector permitting parallel bridging. |
|
Steel front grille with acoustic foam, easily removable, held in place with powerful Neodymium magnets. |
|
Suspension Tracks on top bottom, standard pole cup and inserted threads. |
|
The specific electronic controller guarantees: linear performance, Powerful bass response, and reliability. |
| Applications |
|
Touring, installed P.A., theatres, multi-purpose rooms, etc. |
|
High performance Monitoring |
|
When used together with the series' Sub-woofer PMS-15, the system becomes a performing set-up for many dance applications. |
| Specifications and Characteristics |
| Frequency Response (Hz)1 |
±3dB 60Hz - 18KHz |
| Frequency Range (Hz)1 |
-103dB 40Hz - 20KHz |
| Nominal Impedance |
8 Ohm |
| Power Rating |
|
| (RMS)2 |
300W |
| Program2 |
600W |
| Peak2 |
1200W |
| Horizontal Coverage |
(-6dB) 90? |
| Vertical Coverage |
(-6dB) 40? |
| Sensitivity (dB/1w@1m) |
97dB SPL |
| SPL Max. Peak (dB SPL@1m)3 |
128dB SPL |
| Connectors |
2 Neutrik NL-4 Connectors on steel plate |
| Recommended Signal Processor |
RAM Audio LMS-244 Digital Processor |
| Recommended Power Amp |
250W / 500W @ 8 Ohm, 1 PM-10 / channel |
| Recommended Sub-woofer |
Space PMS-15 |
| Enclosure and Installation |
| Enclosure |
Vertical, multi-angle 15mm Baltic cross-ply construction, tongue and groove assembly throughout.
Bi-component epoxy finish. |
| Protection Grille |
1.5mm laminated steel with textured epoxy finish. |
| Handle |
On top of the cabinet. |
| Dimensions (H,W,D) mm |
521 x 324 x 294 mm 20.5x12.7x11.6 inches |
| Net Weight |
18Kg (39.6 pounds) |
| Rigging |
Integrated Track Rigging System on top and bottom. M-6 Inserts for bolt assembly. |
|
| Notes |
|
| 1 Specifications in half space
2 With filtered Pink Noise 6dB crest-factor
3 Calculated from the Sensitivity and Power Data |
|
Reviews
There are no reviews yet.