| Content |
Your music, your performance or your installation can count on FBT’s new X-LITE series of portable powered speaker systems. Constructed out of polypropylene enclosures, the X-LITE series features a sleek design including 3 x carrying handles and 4 x M10 flying points. In addition, the full front grille provides complete protection, delivering elegance and sturdiness.
Features include built-in Class D amplifier modules providing an amazing 1000W of power to satisfy the most demanding applications, whilst the user-friendly DSP allows 4 x EQ preset selection to perfectly tailor the performance of your X-LITE to your sound requirements. In addition, the X-LITE series is truly versatile, offering a professional control panel that allows you to set up configurations with or without subs. Even better – if you do want to extend the X-LITE low frequency response, you can do so with the dedicated X-SUB 18” powered subwoofer.
|
- Passive 2-way bass-reflex installation speaker
- 200 W permanent load capacity
- 118 dB maximum sound-level pressure
- 10" custom woofer and 1" Celestion high-frequency driver
- Rotating CD horn with 80° x 60° dispersion
- For vertical or horizontal use
- speakON-compatible and terminal block input
- 4 x M8 mounting holes
- Shock-resistant front grille for optimum speaker protection
- Extensive range of smart accessories for installation
- Available in black or white
With its streamlined and compact design, the LD Systems SAT 102 G2 is excellently suited for permanent installation and discreet integration into virtually any setting. It features a 10" custom woofer and a 1" compression driver from Celestion, connected to a rotating CD horn with 80° x 60° dispersion. This makes the passive 2-way speaker ideal for both vertical and horizontal use.
The SAT 102 G2 attains a maximum sound-level pressure of 118 dB over a frequency response curve of 65–19 kHz with a permanent load capacity of 200 watts. The reflex casing made of 15 mm MDF has four M8 mounting holes. The inputs are a speakON-compatible socket and a terminal block, while an additional terminal block serves as an output for convenient parallel connection.
Special wall holders are available as an accessory to facilitate wall mounting. The SAT 102 G2 is available in black (Art. No. LDSAT262G2) or white textured finish (Art. No. LDSAT262G2W).
Product type
Installation Loudspeakers
Type
Wall-mounted Loudspeaker
Low/mid driver dimensions
10 "
Woofer size
254 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil (mm)
50.8 mm
Horn
CD horn
HF driver dimensions
1 "
HF Driver Size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
Celestion
HF driver voice coil
1 "
HF Driver Voice Coil
25.4 mm
Dispersion (H x V)
80 x 60 °
Load rating (RMS)
200 W
Peak power
400 W
Frequency response
65 - 19000 Hz
SPL (1W/1m)
95 dB
Max. SPL
118 dB
Impedance
8 Ohm(s)
Protection circuits
HF Driver
Loudspeaker inputs
2
Speaker input connections
Speakon compatible , terminal block
Loudspeaker outputs
1
Speaker output connections
terminal block
Cabinet material
15 mm MDF
Cabinet surface
texture paint
Cabinet colour
Black
Cabinet construction
vented
Width
300 mm
Height
550 mm
Depth
270 mm
Weight
12,2 kg |
| 2-Way, 10“
High Power System |
| Characteristics |
|
Multi-angled unit, designed for Sound reinforcement or floor monitoring. |
|
Multi-use Mid-High Constant Directivity, rotateable 90x45 degrees Horn. |
|
Active driver "Power Guard" protection without any effective loss. |
|
High Sound Pressure Level, (128dB Peak@1m, pink noise with a 6dB crest-factor). |
|
Rotating Horn and optimised cabinet architecture for monitoring and small P.A. uses. |
|
Two-way passive 8 Ohm design to be used with a single power Amp channel per cabinet to obtain an easy assembly and low cost. |
|
Passive filter, which optimises the voice critical zone response. |
|
Double input NL-4 Neutrik connector permitting parallel bridging. |
|
Steel front grille with acoustic foam, easily removable, held in place with powerful Neodymium magnets. |
|
Suspension Tracks on top bottom, standard pole cup and inserted threads. |
|
The specific electronic controller guarantees: linear performance, Powerful bass response, and reliability. |
| Applications |
|
Touring, installed P.A., theatres, multi-purpose rooms, etc. |
|
High performance Monitoring |
|
When used together with the series' Sub-woofer PMS-15, the system becomes a performing set-up for many dance applications. |
| Specifications and Characteristics |
| Frequency Response (Hz)1 |
±3dB 60Hz - 18KHz |
| Frequency Range (Hz)1 |
-103dB 40Hz - 20KHz |
| Nominal Impedance |
8 Ohm |
| Power Rating |
|
| (RMS)2 |
300W |
| Program2 |
600W |
| Peak2 |
1200W |
| Horizontal Coverage |
(-6dB) 90? |
| Vertical Coverage |
(-6dB) 40? |
| Sensitivity (dB/1w@1m) |
97dB SPL |
| SPL Max. Peak (dB SPL@1m)3 |
128dB SPL |
| Connectors |
2 Neutrik NL-4 Connectors on steel plate |
| Recommended Signal Processor |
RAM Audio LMS-244 Digital Processor |
| Recommended Power Amp |
250W / 500W @ 8 Ohm, 1 PM-10 / channel |
| Recommended Sub-woofer |
Space PMS-15 |
| Enclosure and Installation |
| Enclosure |
Vertical, multi-angle 15mm Baltic cross-ply construction, tongue and groove assembly throughout.
Bi-component epoxy finish. |
| Protection Grille |
1.5mm laminated steel with textured epoxy finish. |
| Handle |
On top of the cabinet. |
| Dimensions (H,W,D) mm |
521 x 324 x 294 mm 20.5x12.7x11.6 inches |
| Net Weight |
18Kg (39.6 pounds) |
| Rigging |
Integrated Track Rigging System on top and bottom. M-6 Inserts for bolt assembly. |
|
| Notes |
|
| 1 Specifications in half space
2 With filtered Pink Noise 6dB crest-factor
3 Calculated from the Sensitivity and Power Data |
|
The CBR10 is the most compact model in its series. While delivering astonishing power for its size and weight, the CBR10 is ideal for both portable and installed applications. |
- Sealed type speaker with 60W continuous pink noise and 180W continuous program power handling capacity.
- Highly efficient operation at rated sound pressure level of 96dB (1W, 1m).
- Frequency response of 100Hz~20,000Hz and 2.5kHz passive network crossover frequency.
- Two-way coaxial unit with 25cm low- frequency cone speaker and high- frequency CD horn fitted with compression driver (60º horizontal × 60º vertical).
- 1.6mm thick punching net and coniferous plywood enclosure make the speaker especially well-suited for indoor sports facility applications.
- Black, semi-matte urethane-painted coniferous plywood enclosure and black, semi-matte acryl-painted steel plate grille.
- Speaker mounting brackets and speaker mounting bolts included.
- Optional matching MT-S0601 transformer.
| Spec. | | Enclosure | Sealed type | | Power Handling Capacity | Continuous Pink Noise: 60W/Continuous Program: 180W | | Rated Impedance | 8 ohms | | Sound Pressure Level | 96dB (1W, 1m) | | Frequency Response | 100 - 20,000Hz | | Crossover Frequency | 2.5kHz (passive network) | | Speaker Component | 2-way coaxial unit/Low Frequency; 25cm cone speaker
High Frequency; CD horn fitted with compression driver (60º horizontal × 60º vertical) | | Input Terminal | 2-pole M5 screw terminal, pitch between barriers; 12.2mm | | Finish | Enclosure; Coniferous plywood, black, semi-mat, urethane paint
Grille; Steel plate, black, semi-mat, acryl paint | | Dimensions (W × H × D) | 460 × 310 × 200mm | | Weight | Speaker System; 9kg
Mounting Bracket; 2kg | | Accessories | Speaker mounting bracket × 2
Speaker mounting bolt × 4 | | The PS-10 JB-Systems is a compact passive speaker with a woofer 10 "is the perfect choice for small applications where high power is not necessary. It is a versatile device that can be used in different installations, there is even a special holder designed for use as a monitor.
JB-Systems Specification PS-10:
This enclosure is suitable for fixed installation and mobile application, the rugged polypropylene housing provides excellent protection components. SP-10 can be mounted on a stand with a standard speaker connection 35mm and can be mounted easily using the integrated mounting points. And as mentioned earlier, you can use the stand included for use as a monitor. This device also has a sturdy handle for easy transport and rubber feet protect the bottom of your speaker.
- passive Speaker
- 10 "woofer
- 1.35 "compression driver
- Power: 160W RMS, 320W peak
- Impedance: 8 Ohm
- Speakon In / Out
- polypropylene housing
- sturdy handle
- Rubber feet
- Can be mounted on standard stand (35mm)
- Points integrated mounting
- Supplied with bracket for use as a monitor
- Weight: 10.3kg
|
Reviews
There are no reviews yet.