| Content |
Your music, your performance or your installation can count on FBT’s new X-LITE series of portable powered speaker systems. Constructed out of polypropylene enclosures, the X-LITE series features a sleek design including 3 x carrying handles and 4 x M10 flying points. In addition, the full front grille provides complete protection, delivering elegance and sturdiness.
Features include built-in Class D amplifier modules providing an amazing 1000W of power to satisfy the most demanding applications, whilst the user-friendly DSP allows 4 x EQ preset selection to perfectly tailor the performance of your X-LITE to your sound requirements. In addition, the X-LITE series is truly versatile, offering a professional control panel that allows you to set up configurations with or without subs. Even better – if you do want to extend the X-LITE low frequency response, you can do so with the dedicated X-SUB 18” powered subwoofer.
|
Active or Passive Passive
Frequency Response -10dB:48-20,000Hz
Power Capacity 600W
Maximum Sound Pressure Level (SPL) 131dB
Nominal Sensitivity 97dB
Impedance 8 ohms
Crossover 2KHz
Low Frequency Driver DVX3121, 12" (305mm) Driver
High Frequency Driver ND2, 1" (25.4mm) exit Neodymium
Enclosure Material Polypropylene Structural Foam
Input Connections Glandnut SJO cable
Mounting Options Enclosure has locations for 4 Single-StudAttachment Plates and 10 Forged SteelEyebolts - 2 on Top, 2 on Bottom, 2 onSide, and 1 on Rear of Enclosure
Dimensions 24.14 x 15.64 x 14.26" (613 x 397 x 362mm)
Weight 43.7 lbs (19.8 kg) |
Todayʼs sound reinforcement and public address applications require equipment that guarantee exceptional sound quality for a large variety of different events. Multi-functionality is a must in order to be able to react on-site to varying customer demands. The DYNACORD VL122 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL122 is ideally suited to be used in most demanding applications. The VL122 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies the rugged DND 12350 Transducer is used. High frequencies are radiated from a rotatable 90°*45° CAD optimized constant directivity horn equipped with an Electro-Voice ND6 1.4” driver. The VL122 can be used in passive fullrange mode and can be switched from the outside to ʽbiampedʼ operation. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available. EASE and Ulysses data allow fast and precise simulations.
Order-# D113103 Cabinet Full-Range Configuration passive 2-Way or Biamped Mode Nominal Impedance 8 ohms Rated Power RMS 400 watts Program Power 800 watts Peak Power 1600 watts SPL 2,83 V/1m 99 dB max. SPL 1m (calc. with Peak) 131 dB Freq. Range (-10 dB) 60Hz - 20Hz Coverage Angle nom. 90° x 45° Passive X-Over Frequency 1,5 kHz VCT Protections yes Components HIGH Ev ND6-8 Order-# D361493 Components LOW DND 12350 Order-# D366559 Connectors SPEAKON 2x NL 4MPR Pin Wiring Normal/Fullrange 1+/1- Pin Wiring Biamped HF 2+/2- Pin Wiring Biamped LF 1+/1- Dimensions (WxHxD) mm 385x 715x 374 Net Weight 24 kg Enclosure Material Birch Plywood Finish Black 2-Component Structure Paint Grille Powder Coated Steel, Acoustic Foam
|
Electro-Voice TX1122 Tour-X 2-Way 12" PA Speaker
The Electro-Voice TX1122 is a high power, 2-way loudspeaker system that can be used in a variety of applications where high-quality sound reinforcement is required in a lightweight package.
It utilizes the DH3, high output 1.25" titanium compression driver, coupled to a constant directivity 90 degree x 50 degree horn. This combination results in a smooth response to 20 kHz and excellent pattern control in short to medium throw applications.
The SMX2120 12" woofer has an FEA optimized magnet structure for very low distortion and maximum intelligibility at high SPL levels. The crossover uses steep 24dB/octave slopes with equalization for very smooth response in vocal range, extended HF, and a protection circuit for long-term reliability.
It has a variety of features that make it equally suited for portable or fixed installation applications. The trapezoidal enclosure is constructed out of a combination of plywood and MDF, and coated with EVCoat for maximum strength while still remaining lightweight. The unique grille design is very strong, dent resistant, and features a rotatable logo. Four-way handles allow for gripping in a variety of positions, a pole mount allows for placement on a subwoofer or a tripod. Six 3/8" threaded points allow a single TX1122 to be suspended in a various positions. The recessed input panel with dual NL4 connectors keeps the connectors hidden, while allowing it to be used with the TX1181 subwoofer for extended sub bass on a single amplifier channel, with no additional processing needed.
Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!
- Freq. response (-3 dB): 60Hz - 20kHz
- Freq. range (-10 dB): 45Hz - 20kHz
- Rec. Hi-pass frequency: 45Hz
- Axial sensitivity: 97dB (1W/1m)
- Max. calculated SPL: 130dB
- Horizontal coverage: 90 degree
- Vertical coverage: 50 degree
- Power handling: 500W continuous, 2000W peak
- LF transducer: SMX2120, 12" (305mm) driver
- HF transducer: DH3, 1.25" (32mm) diaphragm compression driver
- Crossover frequency: 1750Hz
- Nominal impedance: 8 Ohms
- Minimum impedance: 5.4 Ohms
- Connectors: (2) Neutrik Speakon NL4\'s
- Enclosure material: plywood and MDF with EVCoat
- Grille: 16 GA steel, black powdercoat, with rotatable logo
- Suspension: (6) 3/8" threaded points - (2) on each side and (2) on the rear of enclosure
- Dimensions (H x W x D): 24.3" x 15.0" x 15.0" (616mm x 382mm x 380mm)
- Net weight: 44.5lbs (20.2 kg)
- Shipping weight: 50.0lbs (22.7 kg)
|
Specifications
Frequency Response (-3dB) 58 - 15000 Hz
Frequency Response (-10dB) 48 - 20000 Hz
Sensitivity 1W/1m 97 dB
System Power Handling (continuous/program/peak) 600/1200/2400 Watts
Low Frequency Power Handling (continuous/program/peak) 500/1000/2000 Watts
High Frequency Power Handling (continuous/program/peak) 40/80/160 Watts
LF Transducer DVX3121
HF Transducer ND2
Enclosure Material Polypropylene
Color Black
Outdoor Yes
Speaker Type Fullrange
Weight Net 19.8 kg ( 43.65 lbs )
|
Features
* DVX3121 12" LF Transducer with forced air cooling
* ND2 2" Voice Coil, 1" Exit Neodymium CompressionDriver
* 90° x 50° Coverage Pattern
* 600W Continuous (2400W peak) power handling
* High sensitivity, 131 dB maximum SPL
* Adjustable monitor angle (45° or 55°)
* 2 Anchor plates for single stud fittings and 7integral suspension points
* Available in black or white
* Passive/biamp selectable
* Full line of accessories
Specifications
* Frequency Response (-3dB): 58Hz-15kHz
* Frequency Range (-10dB): 48Hz-20kHz
* Rec. Hipass Frequency: 50Hz
* Axial Sensitivity: 97dB (1W/1m)
* Max. Calculated SPL: 131 dB
* Horizontal Coverage: 90°
* Vertical Coverage: 50°
* Power Handling (Passive): 600W continuous, 1200Wprogram, 2400W peak
* LF Power Handling (Biamp): 500W continuous, 1000Wprogram, 2000W peak
* HF Power Handling (Biamp): 40W continuous, 80Wprogram, 160W peak
* LF Transducer: DVX3121, 12" driver
* HF Transducer: ND2, 1" exit Neodymium compressiondriver
* Crossover Frequency: 2kHz
* Nominal Impedance: 8 ohms
* Minimum Impedance: 6.2 ohms
* Connectors: (2) Neutrik Speakon NL4\'s
* Enclosure Material: Polypropylene structural foam
* Suspension: Enclosure has locations for 4 single-studattachment plates and 10 forged steel eyebolts - 2 on top, 2 on bottom, 2 onside, and 1 on rear of enclosure
* Grille: Polyester powder coated, 16GA Galvanizedsteel, with rotatable logo
* Dimensions (H x W x D): 24.14" x 15.64" x 14.26“
* Net Weight: 43.7 lbs
* Shipping Weight: 48.6 lbs |
Reviews
There are no reviews yet.