Content | V19 - MICRO POWER SUPPLY
●Power up 8 multiple effects
●Avoid unwanted cable mess and noise
●Seven – 9V inputs/One – 18V input
●Flexible power configuration covers requirements of majority of pedals
●Eight individually regulated outputs
●Short circuit protection design for individual outputs
●Provides stable 9V DC & 18V power
9V DC Output maximum current of 300mA
18V DC Output maximum current of 150 mA
Connectors: ¼” Input jack, ¼” Output jack
Power: 9V DC, center (-)
Micro pedal package
Dimensions:
46 mm (W) x 94 mm (D) x 50 mm (H)
1.8 in (W) x 3.7 in (D) x 2.0 in (H)
Compact, rugged metal housing | User\'s manual
Palmer MI PWT 12 MK 2
Universal 12-Outlet Pedalboard Power Supply
- Fully regulated universal pedalboard power supply
- 12 standard centre negative outlets with 2,000 mA output total
- 8 x 9 V outlets (300 mA each)
- 4 variable voltage outlets 6 to 18 V (500 mA each)
- Short circuit and overload protection for each outlet
- DC cables and mains adapter included
The PWT 12 is a heavy duty (2000 mA) universal pedal board power supply with 12 isolated 9 V DC, centre-negative female pin-connector outputs. Four of the outputs feature adjustable voltage from 6 to 18 volts. The variable outputs enable the simulation of voltage drop or \'battery sag\' in old batteries. The power supply is regulated for constant voltage supply and protected against short circuit and overloading. The PWT 12 is equipped with a power LED and a two-colour LED output status indicator. It is supplied with an AC adapter and a set of DC cables. The PWT 12 is the ideal solution for power-hungry foot pedals or 9-volt effects units that can be operated at higher voltages for increased dynamics and stability.
Product type
Power Supplies
Input voltage
100 - 250 V
Outputs
12
Output connectors
2.1 x 5.5 mm
Output voltage
12 V , 18 V , 9 V
Max. output current
2000 mA
Isolated outputs
yes
Polarity
center negative
Cord length
25 - 50 cm
Indicators
fault , Power
Controls
Output voltage selector
Width
193 mm
Depth
70 mm
Height
30 mm
Weight
0,4 kg
|
Power Supply Unit for effects Pedals and Amplifiers
| User\'s manual
Palmer MI PWT 04
Universal Pedalboard Power Supply 4-Outputs
- Fully regulated universal pedalboard power supply
- 4 standard centre negative outputs with 1,000 mA output total
- Short circuit and overload protection for each outlet
- DC cables and mains adapter included
The PWT 04 is a universal pedalboard power supply with 1,000 mA output capacity and 4 standard centre negative 9 V DC isolated outputs. Featuring short circuit and overload protection, the PWT 04 is fully regulated to deliver constant voltage. The unit sports a power on LED, and comes with a set of DC cables and dedicated mains adapter.
Product type
Power Supplies
Input voltage
100 - 250 V
Outputs
4
Output connectors
2.1 x 5.5 mm
Output voltage
9 V
Max. output current
each output 250 mA
Isolated outputs
yes
Polarity
center negative
Cord length
25 - 50 cm
Indicators
Power
Width
80 mm
Depth
90 mm
Height
25 mm
Weight
0,12 kg
Accessories (included)
4 x DC cable |
Power supply uniy for Fly 3 |
The PWT12 is universal pedal board power supply with 12 outputs electrically isolated in pairs. Outputs 1 - 8 provide 9 V DC each with a maximum current draw of 250 mA per pair. Outputs 7 and 8 additionally feature a polarity switch to change the center pin from negative to positive (and the barrel to negative).
Outputs 9/10 provide 18 V DC each with a maximum current draw of 125 mA. Additionally, the upper output is switchable to 12 V DC. Providing 9 V DC/250 mA, outputs 11/12 are also switchable to 12 V AC. The green indicator LEDs turn red when alternative ouput voltages are selected.
All output pairs are individually protected against shorts and overload. When a fuse trips the LED indicator of the corresponding pair goes out. After the fault condition has been removed the fuse is automatically reset, and within a few seconds the output resumes operation indicated by the illuminated LED.
The toroidal transformer and the steel housing of the PWT12 provide smooth FX operation free of interference and hum pickup. Mains power input is switchable between 115 V and 230 V.
The PWT12 features two brackets for easy pedal board mounting while a cover plate protects the DC plugs. The DC cables can be fixed to the plate with cable ties for strain relief. The PWT12 comes with a set of 12 long DC cables.
Technical Specifications- Universal power supply for effect pedals
- 12 outputs on barrel-style DC connectors with 2.1 mm center pin
- regulated DC output, all outputs electrically isolated in pairs
- Outputs 1/2, 3/4, 5/6: 9 VDC each, 250 mA per pair, center pin negative, green LED indicators
- Outputs 7/8: 9 VDC, 250 mA/pair, switchable polarity, two-color LED, green = center pin negative, red = center pin positive
- Outputs 9/10: 2x 18VDC (LED = green), switchable to 1x 12VDC / 1x 18VDC (LED = red), maximum current 125mA/pair, center pin negative
- Short circuit protection per pair with automatic reset
- 115 V / 230 V switchable
- Mains fuse: 5 x 20 mm fine wire, 115 V = T 500 mA; 230 V = T 250 mA
- Toroidal transformer, 20 VA continuous
|
Reviews
There are no reviews yet.