YAMAHA BR-10 Speaker 2 way 125W

While maintaining the great sound of the Concert Club series, the BR series provides cost-effective speakers in three configurations to match a wide range of applications. Inheriting the excellent portability and placement flexibility that characterized previous models in the series, and featuring the same tasteful design and powerful sound, the BR series is a great choice for bands, clubs, halls, rehearsal studios, retail or school events … anywhere you need great sound in a medium-scale application.

• Outstanding audio quality with titanium diaphragm HF drivers.
• An ideal match for the EMX series powered mixers and P series power amps.
• Design that carries on the simple sophistication of the Concert Club series.
• Speaker stand pole sockets on all models

Yamaha BR10 Specifications

• Woofer: 10"
• Tweeter (diaphragm): 1" titanium
• Frequency Response (-10dB): 65Hz-20kHz
• Power Handling (noise*/program/peak): 125/250/500 Watts
• Nominal Impedance: 8 ohms
• Nominal Dispersion: 90° H x 40° V C.D.
• Sensitivity (1W, 1m): 96dB
• Input Connectors: 2 x 1/4" Phone
• Dimensions (Approximate): 394x537x396
• Weight: 14.4 Kg.

  * (EIA RS426)

 Made for permanent sound placement.

The Mackie iP-10 10″ Installation Loudspeaker is designed exclusively for a wide range of installed sound reinforcement applications. Behind iP-10's clean, professional look are a high-output, custom-designed 10″ woofer and premium 1.4″ titanium diaphragm compression driver delivering rich, articulate full-bandwidth response. Ample rigging points support vertical and horizontal rigging and a choice of Neutrik or terminal connections provides install flexibility. Optional ceiling and wall mounts are available for aesthetically demanding venues. Plus, the companion iP-18S 18″ subwoofer is perfect for additional low-frequency response and output in larger applications.
FEATURES

    10″ 2-way low-profile installation loudspeaker
    10″ high-output ceramic woofer with 2″ voice coil for maximum output
    1.4″ titanium compression driver provides smooth, consistent high-frequency response
    8 x M10 rigging points and rotatable 90° x 50° horn for vertical/horizontal rigging
    Rotatable center logo allows for clean presentation in all configurations
    Convenient terminal strip connectivity saves time and cost
    Dual Neutrik parallel connectors
    Lightweight, compact and durable 15mm poplar cabinet construction


SPECIFICATIONS

iP-10 10" 2-Way Passive Loudspeaker

    Frequency range (-10 dB): 50 Hz - 20 kHz
    Coverage pattern: 90° x 50°
    Power handling: 200 watts continuous / 400 watts program
    Max SPL: 124 dB
    Crossover frequency: 3 kHz
    Nominal impedance: 8Ω
    Height: 20.5 in / 520 mm
    Width (Front): 12 in / 310 mm
    Width (Rear): 6.8 in / 172 mm
    Depth: 13.4 in / 340 mm
    Product weight: 26 lb. / 11.8 kg

• 38 Hz to 17 kHz frequency range
  (-10 dB)
• 250W pink noise, 500 watts continuous program power capacity
• 120 x 110 degree coverage horn
• 150W, 75W, 38W at 70V/100V (plus 19W tap at 70V only)
• 4 Ohm Bypass
• Outdoor-rated screw down input terminal strip (with MTC-PC2 sealed entrance cover)
• Available in black or white (Control 30-WH)
• Dimensions (HxWxD): 593 mm x 372 mm x 345 mm (23.3 in x 14.6 in x 13.5 in)
• Net Weight: 18.9 kg (42 lb)

• Equipped with: 2" tweeter and 10" woofer
• Equipped with Yamaha\'s "Wide Dispersion CD Waveguide Horn“
• Rated power: 700 W (PGM)
• Biamp mode
• Setting for floor monitor
• Lightweight but durable wooden cabinet with high quality polyurea coating
• Stand flange mount for two angles
• Rotatable horn and various U-bracket options (UB-DZR10H/V) for flexible setup and placement
• Dimensions (W x H x D): 315 x 537 (with rubber feet) x 345 mm
• Weight: 14.0 kg

Archon - A new generation of improved speakers for modern indoor spaces

The Archon series of full-range and bi-amped speaker systems have been designed to provide ample bandwidth and high SPL for an accurate sound reproduction in the most various  application projects.

With the Archon series FBT wants to meet today’s expectations of the installed sound market: a new generation of improved speakers responding to high quality sound requirements for  modern indoor spaces.

The FBT Archon series lines up three 2-way full range/bi-amp models and three 2-way full range compact models; in addition, two low-profile subwoofers (2x8” and 2x15”) increase the low frequency extension of the desired systems. All Archon speakers are elegantly designed and crafted to meet the most demanding architectural design.

The FBT Archon series has been engineered to fulfill the need of high quality sound in bars, pubs, restaurants, retail shops, clubs, entertainment venues, fitness centers, conference  rooms, theatres, educational institutions, houses of worship, museums, exhibition centers, cruise ships, corporate A/V, granting excellent speech intelligibility, wide and precise band coverage, ease of installation thanks to the flexible mounting hardware.

• 1 x 10” (2.5” VC) B&C custom made high excursion LF woofer
• 1 x 1” (1.7” VC) B& C custom made HF compression driver
• 1 x 1” FBT rotatable 80° x 50° constant directivity horn
• 2-way, passive sound reinforcement systems
• 15mm (0.6”) baltic birch plywood cabinets
• B&C custom designed high excursion LF woofers
• B&C custom designed HF compression drivers
• Full range / bi-amp crossover networks with protection
• 2 x Neutrik NL-4 speakon connectors
• 1 x 4 Euroblock terminal speaker connector
• 12 x M10 threaded rigging points
• 2 x metal flange threads for U bracket wall mount
• Acoustically transparent steel grille and antidust protection cloth
• Rear pocket handle to ease lifting and installation of the cabinet
• 35mm (1. 3/8”) top hat for speaker stand
• New FBT rotatable logo badge following vertical or horizontal installation
• Optional mounting hardware
• Optional line transformer 200W