| Content |
Passive speaker, 1x1.5in, black
Background music reproduction requires uniform dispersion, uniform frequency response, and optimum sound pressure level for the space. The VXS Series M model has been designed specifically for BGM applications, and satisfies all of the above conditions to the highest degree. Broad 170° horizontal and vertical dispersion delivers uniformly accurate frequency response throughout the coverage area, providing sound so natural that the listener might be fooled into believing it is a live musical performance.
The VXS1ML features a newly developed compact 1.5-inch full-range driver with a powerful neodymium magnet. This innovative driver has been painstakingly designed to achieve remarkably detailed, realistic reproduction of musical waveforms. The entire system has been fine-tuned to deliver top-quality sound in a surprisingly compact, lightweight unit.
In addition to being packed into the smallest possible dimensions to minimize visual impact, the VXS1ML boasts smoothly flowing lines that allow it to blend unobtrusively with just about any interior décor. The VXS1ML brings together the best of both worlds: outstanding sound and sophisticated visual appeal.
The VXS1ML is supplied with dedicated hardware that allows simple 3-step surface mounting on a wall or ceiling. For installations where the presence of speakers must be minimized the optional CMA1M Ceiling Mount Adapter can be used to mount the VXS1ML flush with the ceiling.
In situations where more substantial low end is required, the compact VXS3S subwoofer is a perfect match for the VXS1ML. Featuring original SR-Bass™ technology, the VXS3S delivers big bass performance in a unit that is no larger that a compact surface-mount full-range speaker. The VXS3S has satellite connectors for direct, simple setup with VXS series "M” models, plus optimum sonic balance.
|
The SR-H3L Line Array Speaker forms a linear sound source by the internal speaker units arrayed vertically in close proximity. It can be used for high-impedance applications with the installation of the optional MT-S0301 Matching Transformer.
Specification Enclosure Bass-reflex type
Power Handling Capacity Continuous program: 360 W
Rated Impedance 8 Ω
Sensitivity 95 dB (1 W, 1 m equivalent, measured at 8 m)
Frequency Response 110 - 18,000 Hz (when using an optional digital processor)
Directivity Angle Horizontal: 90゜
Vertical: 0゜ (within the range of speaker height)
Speaker Component 7 cm (2.8“) cone-type × 16
Input Connector Removable input connector
Finish Enclosure: MDF, white, urethane paint
Front grille: Punched steel plate, white, acrylic paint
Dimensions 84 (W) × 1186.4 (H) × 115 (D) mm (3.31" × 46.71" × 4.53“)
Weight 7.6 kg (16.75 lb)
Option Matching transformer: MT-S0301
Extension plate: SR-EP3
Wall mounting bracket: SR-WB3
Wall tilt bracket: SR-TB3
Flying bracket: SR-FB3
Stand adapter: SR-SA3 (Applicable stand: ST-33B)
Digital processor: DP-0206
|
The SR-H2S Line Array Speaker forms a linear sound source by the internal speaker units arrayed vertically in close proximity. It can be used for high-impedance applications with the installation of the optional MT-S0301 Matching Transformer.
Specification Enclosure Bass-reflex type
Power Handling Capacity Continuous program: 180 W
Rated Impedance 8 Ω
Sensitivity 90 dB (1 W, 1 m equivalent, measured at 4 m)
Frequency Response 90 - 17,000 Hz (when using an optional digital processor)
Directivity Angle Horizontal: 90゜, Vertical: 20゜
Speaker Component 7 cm (2.8“) cone-type × 9
Input Connector Removable input connector
Finish Enclosure: MDF, white, urethane paint
Front grille: Punched steel plate, white, acrylic paint
Dimensions 84 (W) × 663.4 (H) × 115 (D) mm (3.31" × 26.12" × 4.53“)
Weight 4.2 kg (9.26 lb)
Option Matching transformer: MT-S0301
Extension plate: SR-EP3
Wall mounting bracket: SR-WB3
Wall tilt bracket: SR-TB3
Flying bracket: SR-FB3
Stand adapter: SR-SA3 (Applicable stand: ST-33B)
Digital processor: DP-0206
|
Key Features:
- Ultra compact enclosure
- Dual 135 mm (5.25 in) LF transducers
- 90° x 90° waveguide with 25 mm
(1 in) dome tweeter
- Dual Neutrik NL4 connectors plus
screw terminals
- Multiple Attachment Points for Ultimate
Flexibility
Specifications:
System:
Frequency Range (-10 dB): 80 Hz - 20 kHz
Frequency Response (+/-3 dB): 90 Hz - 18 kHz
Horizontal Coverage: 90°
Vertical Coverage: 90°
Directivity Factor (Q): 7.5 (avg. 500 Hz - 16 kHz)
Directivity Index (DI): 8.5 (avg 500 Hz - 16 kHz)
System Sensitivity1: 91 dB SPL/1W/1m
Rated Maximum SPL (1m)2: 115 dB
System Nominal Impedance: 16 Ohms
Long-Term System Power Rating3:
(Continuous/Program/Peak): 225 W / 450 W / 900 W
AES Standard Power Rating4: 300 W
Crossover: 3.3 kHz
Transducers:
Low Frequency Driver: 2 x JBL 225H, 135 mm (5.25 in) SFG™ driver with 38 mm (1.5 in)
edge wound voice coil
High Frequency Driver: 1 x JBL 201J, 25mm (1 in) voice coil dome tweeter
High-Frequency Waveguide: Constant Coverage 90° x 90°
Physical:
Enclosure: 12 mm exterior grade multi-ply hardwood plywood
Suspension Attachment: 4 x M8 points; 1 top, 1 bottom, 2 rear.
4 x M6 rear for OmniMount® 30.0.
Finish: Black DuraFlex™ finish. White (-WH) available upon request.
Optional Weather Resistant Versions5: WRC & WRX not available for this model
Grille: Powder coated 18 gauge perforated steel, acoustically
transparent foam backing (grille cloth backing on white units)
Input Connectors: Neutrik Speakon® NL4 (2 wired in parallel), plus CE-compliant
covered barrier strip terminals. Barrier terminals accept up to
5.2 sq mm (10 AGW) wire or max width 9 mm (.375 in) spade
lugs. NL4ʼs +1/-1 in parallel with barrier strip (+2/-2 loop
through).
Environmental Specifications: Mil-Std 810; IPx3 per IEC529. For higher environmental
ratings, use WRC or WRX.
Dimensions (H x W x D): 377.8 x 150.3 x 177.8 mm
(14.9 x 5.9 x 7.0 in)
Weight: 7.5 kg (16.5 lb)
|
SR-H3S Line Array Loudspeaker; Bass-reflex type; Continuous program: 360W; Sensitivity: 92dB; Directivity: Horizontal: 90°, Vertical: 20°
Specifications SR-H3S
Enclosure Bass-reflex type
Power Handling Capacity Continuous program: 360W
Rated Impedance 8Ω
Sensitivity (1W,1m equivalent measured at 4m) 92dB
Frequency Response 90 – 17,000Hz (when using optional Digital processor)
Directivity Angle Horizontal: 90°, Vertical: 20° (within the range of speaker height)
Speaker Component 7cm (2.8“) cone-type × 16
Input Connector Removable input connector
Finish
Enclosure MDF, white, urethane paint
Front grille Punched steel plate, white, acrylic paint
Dimensions 84 (W) × 1177.2 (H) × 17 (D)mm (3.31" x 46.35" x 6.18“)
Weight 7.9kg (17.42 lb)
Option Extension plate: SR-EP3, Wall mounting bracket: SR-WB3, Wall tilt bracket: SR-TB3, Flying bracket: SR-FB3, Speaker stand adapter: SR-SA3, Speaker stand: ST-33B, Matching transformer: MT-S0301, Digital processor: DP-0206
|
- 85 Hz to 22 kHz frequency range (-10 dB)
- 50 watts continuous program power capacity
- 86 dB sensitivity (1W/1m)
- 8 ohms nominal impedance
- 3.5 kHz crossover frequency
- High-Impact Polystyrene (HIPS) enclosure
- Spring-loaded input terminals
- Dimensions (HxWxD): 193 mm x 140 mm x 111 mm (7.6 in x 5.5 in x 4.4 in)
- Net Weight: 1.8 kg (4 lb)
|
Reviews
There are no reviews yet.