| Content |
Woofers 15“
Tweeter (diaphragm) 1" titanium
Frequency Response (-10dB) 60Hz-20kHz
Power Handling (noise*, program, peak) (*-EIA RS-426) 200/400/800 Watts
Nominal Impedance 8 ohms
Sensitivity (1 W, 1m) 98dB
Dimensions W x H x D (approx) 19" x 25 3/4" x 14 1/2“
Weight (lbs.) 46.9
|
The QRx153/75 is a biamped three-way full-range loudspeaker system capable of filling performance spaces with beautifully balanced audio and high acoustic output capability.
The QRx153 is designed to be bi-amplified at 500 Hz utilizing a DX38 digital controller, or a P1202 power amplifier with M153 control module. All QRx models use 13 ply plywood, Futura coating, and steel grilles for wear and weather resistance. The QRx153 is trapezoidal with 15° side angles. "L” track rigging is installed on the enclosure top and bottom. Small arrays can be flown for live work, or the system can be suspended horizontally or vertically for fixed installations.
Thanks to its combination of the DL15ST woofer and large enclosure volume; the horn-loaded 8-inch midrange driver and powerful 3-inch compression driver, the EV QRx153/75 has extended response for high-level, high fidelity applications without the need of a subwoofer. The horn-loaded midrange driver provides excellent pattern control in this critical response area. Both MF and HF horns are aimed downward 10° to provide optimal aiming when the speaker is elevated above the audience. This also helps control sound to provide greater intelligibility.
The QRx153/75 has an excellent combination of performance and flexibility for demanding audiences. | The P3115-T is a weatherproof full range, wide-dispersion, coaxial two way loudspeaker system offering substantial power and efficiency for a variety of professional indoor or outdoor applications.
The high-frequency section is a constant directivity CMD horn loaded to a 1” RCF Precision Neodymium compression driver with a 1.5” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is a 15” woofer with a 2.5” voice coil. The P3115-T features a selectable line transformer for 70 - 100 Volt applications. P 3115-T meets the requirements of IP 55 code (International Protection Rating).
- Cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected and waterproof IP 55
- Front grille in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing
- Stainless steel bracket
- 15" high-output LF transducer with 2" voice coil
- RCF Precision Neo 1" Compression Driver with 1.5" voice coil
- 90° x 60° constant directivity horn
- 10° X 20° enclosure sides for array configurations
- Active Mosfet Compression Driver Protection
- 12 brass suspension points (M10)
- Line transformer
Acoustical Specifications
- Frequency Response -10 dB: 75 Hz ÷ 20 kHz
- Max SPL @ 1m: 129 dB
- Horizontal coverage angle: 90°
- Vertical coverage angle: 60°
- Directivity index; Q: 13.3
- System Sensitivity: 98 dB
- Nominal Impedance: 16 Ω
- Power Handling: 300 W
- Peak Power Handling: 1200 W
- Protections: dinamyc
- Crossover frequencies: 1300 Hz
Transducers
- Compression Driver: 1" HF driver, 1.5" voice coil
- Nominal Impedance: 8 Ω
- Input Power Rating: 25 W AES
- Sensitivity: 108 dB
- Woofer: 15" woofer, 2.5" voice coil
- Nominal Impedance: 16 Ω
- Input Power Rating: 250 W AES
- Sensitivity: 98 dB
Input Section
- Input connector: 4-adriges Neopren Kabel, 5m
- Constant voltage transformer: 70/100 V
- Power Selection: 70V/60W, 30W , 100V/120W, 60W
Cabinet
- Cabinet Material: Polyethylene rotomoulded
- Hardware: 12 x M10 inserts+ U-brackets and pair of spacers
- Grille: Custom perforated aluminium grillewith open-cell fiber and water repellent woven fabric backing
- Colour: grey
Physical Specifications
- Height: 463 / 18.22 mm/inch
- Width: 463 / 18.22 mm/inch
- Depth: 433 / 17.04 mm/inch
- Net Weight: 19.4 / 42.76 kg/lbs
|
The passive dB500 has many of the same features as the dB500a, including the same rugged enclosure, and advanced drivers. A natural sounding fixed crossover is built-in, and the back panel features 1/4" and Speakon connectors.
The dB500 speaker cabinet features an array of mounting options. Designed with floor monitoring in mind, they are also easily stacked or permanently installed. A 1 3/8" pole receptacle is built in, and 10 reinforced fly points are available.
|
The Zx5 is a 15-inch, 2-way cabinet with the most elegant high-impact composite enclosure, featuring the newest generation of EV components: the all-new DXV3150, 500W, 15-inch woofer and the all-new 2-inch neodymium ND2 compression driver. The Zx5 is rated for 600 watts long-term power handling and is able of producing high SPLs whilst providing a very smooth frequency response. With two available coverage patterns (60-degrees x 60-degrees or 90-degrees x 50-degrees), two adjustable monitor angles (45- or 55-degrees) and ten built-in rigging and suspension points allowing for a variety of mounting accessories, the Zx5 fits a variety of applications: installations of individual speakers or clusters in entertainment, cultural or religious venues, as well as on stages with bands, musicians and P.A. rental companies. Specifications Frequency Response (-3dB) 52 - 16000 Hz Recommended High-Pass Frequency 36 Hz Sensitivity 1W/1m 98 dB Max. SPL / 1m (calc); full space 132 dB Coverage (nominal -6dB) H° 60 ° Coverage (nominal -6dB) V° 60 ° System Power Handling (continuous/program/peak) 600/1200/2400 Watts Crossover Frequency 1500 Hz Nominal Impedance (Passive) 8 Ohms Minimum Impedance 6.5 Ohms Input Connections Four-pin Speakon (2) Chassis Size 15 inches Weight Net 22.5 kg ( 49.6 lbs ) Dimensions (HxWxD) 692 x 446 x 411 mm (27.24" x 17.56" x 16.18 |
- 1.4" compression driver with 3" voice coil
- 15" woofer, high power, 3.5" voice coil
- 133 dB max spl
- Input Power Rating: 650 W AES
ART 725 MK4 is a passive two-way system with an accurate acoustic design for club installations and live music. Thanks to the high quality compression driver with a 3” voice coil and the 15” woofer, the ART 725 MK4 delivers clear high frequencies, punchy bass and full and precise mid frequencies. The new aluminium rear panel is equipped with Speakon in/out connectors.
Specifications
Acoustical specifications
Frequency Response (-10dB):
55 Hz ÷ 20000 Hz
Max SPL @ 1m:
133 dB
Horizontal coverage angle:
90°
Vertical coverage angle:
60°
System Sensitivity:
99 dB
Power section
Crossover frequencies:
1400
Transducers
Compression Driver:
1.4'' neo, 3.0'' v.c
Nominal Impedance (Ohm):
8 ohm
Input Power Rating:
110 W AES, 220 W PEAK
Sensitivity (dB, 1W @ 1m):
109 dB, 1W @ 1m
Woofer:
15'' neo, 3.5'' v.c
Nominal Impedance (Ohm):
8 ohm
Input Power Rating:
650 W AES, 1300 W PEAK
Sensitivity (dB, 1W @ 1m):
98 dB, 1W @ 1m
Input/Output section
Input connectors:
Speakon
Output connectors:
Speakon
Standard compliance
CE marking:
Yes
Physical specifications
Cabinet/Case Material:
PP Composite
Hardware:
2 x M10
Handles:
1 Top, 2 Side
Pole mount/Cap:
Yes
Grille:
Steel
Color:
Black
Size
Height:
708 mm / 27.87 inches
Width:
437 mm / 17.2 inches
Depth:
389 mm / 15.31 inches
Weight:
20.5 kg / 45.19 lbs
Shipping informations
Package Height:
725 mm / 28.54 inches
Package Width:
550 mm / 21.65 inches
Package Depth:
505 mm / 19.88 inches
Package Weight:
23.7 kg / 52.25 lbs |
Reviews
There are no reviews yet.