Content |
- 2-way powered loudspeaker with a 2” HF and a 12\" LF
- Maximum 139dB SPL and 39Hz-20kHz frequency range is ideal for today’s sound engineering demands
- High power 2000W Class-D amplifier module
- 96kHz DSP and FIR filter for true high-resolution sound with super low latency
- Features Advanced FIR-X tuning, the combination of FIR filtering and correct EQ for minimizing phase distortion
- Access a variety of DSP functions and load presets, or make precise adjustments to PEQ, delay and routing etc. via the intuitive LCD display
- D-Contour and highly reliable protection circuits
- Floor monitoring setting enables mirroring configuration
- Lightweight yet very durable plywood cabinet with premium grade Polyurea coating
- Optional speaker cover (SPCVR-DZR12)
- Rotatable horn and variety of U-bracket options (UB-DZR) for rigging allow for very flexible setup and speaker placement
|
Key Features:
- Compact Powered bi-amplified
full-range loudspeaker with JBL
DrivePack® technology for portable or
installed use
- Optimized for both portable/rental or
permanent-venue use
- 1750 watts peak output power,
875 watts continuous
- 12-inch Differential Drive® lowfrequency
driver for extended lowfrequency
output
- Robust powder-coated die cast
aluminum handles, designed for
strength and comfort
- Integrated 35 mm stand mount
Specifications:
Frequency Response (+/-3 dB): 65 Hz - 18 kHz80 Hz – 20 kHz
Frequency Range (-10 dB): 55 Hz - 20 kHz50 Hz – 20 kHz
Coverage Pattern: 90° x 50°
Directivity Factor (Q): 12.6
Directivity Index (DI): 11 dB
Maximum Peak Output1: 134 dB SPL 1m
Transducer Section:
Low Frequency Section: JBL 2262FF, 304 mm (12 in) dia., 76 mm (3 in) Dual Coil
neodymium Differential Drive®, Direct Cooled
Bandpass Nominal Impedance: 2 x 2 ohms
High Frequency: JBL 2452H-SL, 100 mm (4 in) titanium damped
diaphragm, 1.5 in. exit.
Bandpass Nominal Impedance: 8 ohms
System:
DPC1 Internal Amplification Output
(at nominal load) 1750 Watts Peak, 875 Watts Continuous
DPC1 Output (Continuous IEC shaped
pink noise into rated load impedance): 750LF/125HF Watts
DPC1 Output Section: LF: Dual Bridged Technology™, Class D
HF: Bridged Class D
Audio Input connector XLR with loop-through
User Controls: 80 Hz Subwoofer High Pass Filter. Enable/Disable
0-16 dB input Attenuator with 32 precision 0.5 dB steps
Signal Processing: DSP based, resident in Input Module.
System Management: DSP based limiters for mechanical and thermal
protection
AC Power Operating Range: 90-132 VAC/216-264 VAC, 50/60 Hz
AC Line Voltage: 50/60 Hz; User Selectable; 120V/240V (-15%, +10%)
AC Input Connector: Neutrik PowerCon (NAC 3MPA)
AC Loop-thru: Neutrik PowerCon (NAC 3MPB)
AC Current Requirement: 6A per system at 120V, 3A per system at 240V
Enclosure:
Box Construction: 5/8 in. multi-ply exterior grade Baltic birch. Internally
braced. Black DuraFlex™ finish.
Suspension System: 9 M10 Fittings + 2 M6 Fittings, 35 mm pole mount
socket
Grille: 14 Gauge Black powder-coated perforated steel with
foam backing.
Dimensions (H x W x D): 533 x 358 x 334 mm
21.0 x 14.1 x 13.1 in
Net Weight: 21.3 kg (47 lb)
|
Features
- Compact multi-purpose system with monitor position
– Ultra lightweight 3rd generation Class D amplifier
– Switch-mode power supply
– Reduced size and weight
– Pole mount socket
– Rigging points
The Avant series incorporates an impressive battery of high tech features that take powered portable systems to a new level of performance. The latest in Class D power amplification, digital signal processing and optimized D.A.S. components have been combined with enclosures designed for ease of transportation and road worthiness.
The Avant 12A offers a multi-angle enclosure which allows it to be used in stage monitor applications as well as a compact P.A. system.
The 600 W Class D amplifier provides extended bandwith, improved dynamic range and exceptionally low distortion. This makes the Avant series one of the best sounding systems on the market. After all, isn´t quality sound what it´s all about?
The 12AV4 loudspeaker designed and built by D.A.S. provides accurate low frequency reproduction. High frequencies are handled by the M-50N compression driver which uses a neodymium magnet structure and 2" titanium diaphragm-features hard to find on other systems in this market segment.
Technical Data
Nominal LF Amplifier Power | 500 W | Nominal HF Amplifier Power | 100 W | Frequency Range (-10 dB) | 60 Hz-20 kHz (EQ Main) | Rated Peak SPL at 1 m | 133 dB | Dispersion | 80ºH x 50ºV rotatable horn | Enclosure Material | Plywood | Color/Finish | Black/Paint | Connectors | Input: Female XLR-Jack combo
Loop Thru: XLR
AC Input Male IEC | AC Requirements | 115 V, 50/60 Hz
230 V, 50/60 Hz | Current Draw (1/3 power @ 230 V) | 1.7 A | Dimensions (H x W x D) | 71.3 x 36.2 x 39.7 cm
28 x 14.3 x 15.6 in | Weight | 22 kg (48 lb) |
|
Key Features:
- Compact Powered bi-amplified
full-range loudspeaker with JBL
DrivePack® technology for portable or
installed use
- Optimized for both portable/rental or
permanent-venue use
- 1750 watts peak output power,
875 watts continuous
- 15-inch Differential Drive® lowfrequency
driver for extended lowfrequency
output
- Robust powder-coated die cast
aluminum handles, designed for
strength and comfort
- Integrated 35 mm stand mount
Specifications:
Frequency Response (+/-3 dB): 60 Hz - 18 kHz80 Hz – 20 kHz
Frequency Range (-10 dB): 45 Hz - 20 kHz50 Hz – 20 kHz
Coverage Pattern: 90° x 50°
Directivity Factor (Q): 12.6
Directivity Index (DI): 11 dB
Maximum Peak Output1: 135 dB SPL 1m
Transducer Section:
Low Frequency Section: JBL 2265FF, 381 mm (15 in) dia., 76 mm (3 in) Dual Coil
neodymium Differential Drive®, Direct Cooled
Bandpass Nominal Impedance: 2 x 2 ohms
High Frequency: JBL 2452H-SL, 100 mm (4 in) titanium damped
diaphragm, 1.5 in. exit.
Bandpass Nominal Impedance: 8 ohms
System:
DPC1 Internal Amplification Output
(at nominal load) 1750 Watts Peak, 875 Watts Continuous
DPC1 Output (Continuous IEC shaped
pink noise into rated load impedance): 750LF/125HF Watts
DPC1 Output Section: LF: Dual Bridged Technology™, Class D
HF: Bridged Class D
Audio Input connector XLR with loop-through
User Controls: 80 Hz Subwoofer High Pass Filter. Enable/Disable
0-16 dB input Attenuator with 32 precision 0.5 dB steps
Signal Processing: DSP based, resident in Input Module.
System Management: DSP based limiters for mechanical and thermal
protection
AC Power Operating Range: 90-132 VAC/216-264 VAC, 50/60 Hz
AC Line Voltage: 50/60 Hz; User Selectable; 120V/240V (-15%, +10%)
AC Input Connector: Neutrik PowerCon (NAC 3MPA)
AC Loop-thru: Neutrik PowerCon (NAC 3MPB)
AC Current Requirement: 6A per system at 120V, 3A per system at 240V
Enclosure:
Box Construction: 5/8 in. multi-ply exterior grade Baltic birch. Internally
braced. Black DuraFlex™ finish.
Suspension System: 13 M10 Fittings, 35 mm pole mount socket
Grille: 14 Gauge Black powder-coated perforated steel with
foam backing.
Dimensions (H x W x D): 613 x 434 x 359 mm
24.1 x 17.1 x 14.1 in
Net Weight: 24.7 kg (55 lb)
|
Dimensions (H x W x D) 620 x 394 x 330 mm (24.4 x 15.5 x 13“)
Net Weight 20.5 kg (45.1 lbs)
Components 1 x 12" (305 mm) LF driver, 1 x 1" (25 mm) HF compression driver
Frequency Response 50 Hz - 18 kHz ±3 dB
Dispersion 90° H x 60° V @ -6 dB points
Calculated Max SPL 128 dB peak
Construction Injection-moulded polypropylene enclosure. Recessed carrying handles. Integral dual-angle pole mount socket
Grille Powder coated galvanised perforated steel mesh with foam backing
Connectors
Mic/Line input: combo jack/female XLR wired pin 2 hot
Mix out: male XLR wired pin 2 hot
IEC mains connector with integrated fuseholder with integrated fuseholder
Rigging (6) M10 threaded internal rigging points
Spares & Accessories LS-1229 12" (305 mm) Replacement LF loudspeaker
RC-1229 Recone kit
CD-125 1" (25 mm) HF compression driver
RD-125 HF diaphragm
MG-M12 Metal grille
PB-55 Wall bracket, pole mount fixing
EB-10 Shoulder eyebolt
|
The tops of the LDBLOCKX Power Tower are fitted with 12" custom made midrange speakers and a 1" Celestion Driver, they are driven by a 450 W RMS Bi-Amp amplifier producing a maximum sound pressure level of 128 dB.
Specifications LD Block X 12" Topteil Active: - Model Name: LDATOP12
- Type: Bassreflex
- Components:
- Woofer: 12" Custom Made
- Compression Driver: 1" Custom Made
- Amplification: Class A / B (Bi-Amp)
- Dispersion: 60° x 40°
- Power (RMS): 350 W + 100 W
- Frequency Range: 80 Hz - 20 kHz
- SPL (1 W/ 1 m): 101 dB
- Max SPL: 128 dB
- Protection: Limiter, Thermal, DC, Short circuit, HF
- Controls: Main Volume, Tweeter Volume, switchable High Pass (80 / 120 Hz), On/Off Switch
- Indicators: Power, Limiter, Signal, Protect
- Connectors:
- Input: Line: XLR + Jack 6,3mm (Combo)
- Output: Line: XLR
- Power Supply: Transformer
- Cabinet Material: 15 mm Plywood
- Cabinet Surface: Painting
- Dimensions (W x H x D): 450 x 500 x 520 mm
- Features: Ergonomic milled handles
|
Reviews
There are no reviews yet.