Content |
- 2-way powered loudspeaker with a 2” HF and a 12\" LF
- Maximum 139dB SPL and 39Hz-20kHz frequency range is ideal for today’s sound engineering demands
- High power 2000W Class-D amplifier module
- 96kHz DSP and FIR filter for true high-resolution sound with super low latency
- Features Advanced FIR-X tuning, the combination of FIR filtering and correct EQ for minimizing phase distortion
- Access a variety of DSP functions and load presets, or make precise adjustments to PEQ, delay and routing etc. via the intuitive LCD display
- D-Contour and highly reliable protection circuits
- Floor monitoring setting enables mirroring configuration
- Lightweight yet very durable plywood cabinet with premium grade Polyurea coating
- Optional speaker cover (SPCVR-DZR12)
- Rotatable horn and variety of U-bracket options (UB-DZR) for rigging allow for very flexible setup and speaker placement
|
Dimensions (H x W x D) 620 x 394 x 330 mm (24.4 x 15.5 x 13“)
Net Weight 20.5 kg (45.1 lbs)
Components 1 x 12" (305 mm) LF driver, 1 x 1" (25 mm) HF compression driver
Frequency Response 50 Hz - 18 kHz ±3 dB
Dispersion 90° H x 60° V @ -6 dB points
Calculated Max SPL 128 dB peak
Construction Injection-moulded polypropylene enclosure. Recessed carrying handles. Integral dual-angle pole mount socket
Grille Powder coated galvanised perforated steel mesh with foam backing
Connectors
Mic/Line input: combo jack/female XLR wired pin 2 hot
Mix out: male XLR wired pin 2 hot
IEC mains connector with integrated fuseholder with integrated fuseholder
Rigging (6) M10 threaded internal rigging points
Spares & Accessories LS-1229 12" (305 mm) Replacement LF loudspeaker
RC-1229 Recone kit
CD-125 1" (25 mm) HF compression driver
RD-125 HF diaphragm
MG-M12 Metal grille
PB-55 Wall bracket, pole mount fixing
EB-10 Shoulder eyebolt
|
Features
- Compact multi-purpose system with monitor position
– Ultra lightweight 3rd generation Class D amplifier
– Switch-mode power supply
– Reduced size and weight
– Pole mount socket
– Rigging points
The Avant series incorporates an impressive battery of high tech features that take powered portable systems to a new level of performance. The latest in Class D power amplification, digital signal processing and optimized D.A.S. components have been combined with enclosures designed for ease of transportation and road worthiness.
The Avant 12A offers a multi-angle enclosure which allows it to be used in stage monitor applications as well as a compact P.A. system.
The 600 W Class D amplifier provides extended bandwith, improved dynamic range and exceptionally low distortion. This makes the Avant series one of the best sounding systems on the market. After all, isn´t quality sound what it´s all about?
The 12AV4 loudspeaker designed and built by D.A.S. provides accurate low frequency reproduction. High frequencies are handled by the M-50N compression driver which uses a neodymium magnet structure and 2" titanium diaphragm-features hard to find on other systems in this market segment.
Technical Data
Nominal LF Amplifier Power | 500 W | Nominal HF Amplifier Power | 100 W | Frequency Range (-10 dB) | 60 Hz-20 kHz (EQ Main) | Rated Peak SPL at 1 m | 133 dB | Dispersion | 80ºH x 50ºV rotatable horn | Enclosure Material | Plywood | Color/Finish | Black/Paint | Connectors | Input: Female XLR-Jack combo
Loop Thru: XLR
AC Input Male IEC | AC Requirements | 115 V, 50/60 Hz
230 V, 50/60 Hz | Current Draw (1/3 power @ 230 V) | 1.7 A | Dimensions (H x W x D) | 71.3 x 36.2 x 39.7 cm
28 x 14.3 x 15.6 in | Weight | 22 kg (48 lb) |
| Features
- Best in class audio performance
- 2000 Watt Class-D amplifier module
- Intrinsic Correction™ tuning and loudspeaker management
- DMT™ (Directivity Matched Transition) design provides excellent power response and consistent performance across the listening are
- Refined, professional appearance looks great in any application
- Rugged ABS enclosure for long life and lasting durability
- Deployment in either main PA or floor monitor position
- Factory Presets and savable/recallable Scenes for commonly-used application
- Multi-function digital display for control and selection of loudspeaker functions including cross-over, EQ, delay and frequency contour
- Dual pole cup mounts (standard and 7.5 degree down-tilt)
- M10 fittings for flown applications
- Optional security panel prevents unauthorized tampering of controls
- Complete EASE and CAD information available online
- 6-Year Warranty (with product registration)
|
Key Features:
- Compact Powered bi-amplified
full-range loudspeaker with JBL
DrivePack® technology for portable or
installed use
- Optimized for both portable/rental or
permanent-venue use
- 1750 watts peak output power,
875 watts continuous
- 15-inch Differential Drive® lowfrequency
driver for extended lowfrequency
output
- Robust powder-coated die cast
aluminum handles, designed for
strength and comfort
- Integrated 35 mm stand mount
Specifications:
Frequency Response (+/-3 dB): 60 Hz - 18 kHz80 Hz – 20 kHz
Frequency Range (-10 dB): 45 Hz - 20 kHz50 Hz – 20 kHz
Coverage Pattern: 90° x 50°
Directivity Factor (Q): 12.6
Directivity Index (DI): 11 dB
Maximum Peak Output1: 135 dB SPL 1m
Transducer Section:
Low Frequency Section: JBL 2265FF, 381 mm (15 in) dia., 76 mm (3 in) Dual Coil
neodymium Differential Drive®, Direct Cooled
Bandpass Nominal Impedance: 2 x 2 ohms
High Frequency: JBL 2452H-SL, 100 mm (4 in) titanium damped
diaphragm, 1.5 in. exit.
Bandpass Nominal Impedance: 8 ohms
System:
DPC1 Internal Amplification Output
(at nominal load) 1750 Watts Peak, 875 Watts Continuous
DPC1 Output (Continuous IEC shaped
pink noise into rated load impedance): 750LF/125HF Watts
DPC1 Output Section: LF: Dual Bridged Technology™, Class D
HF: Bridged Class D
Audio Input connector XLR with loop-through
User Controls: 80 Hz Subwoofer High Pass Filter. Enable/Disable
0-16 dB input Attenuator with 32 precision 0.5 dB steps
Signal Processing: DSP based, resident in Input Module.
System Management: DSP based limiters for mechanical and thermal
protection
AC Power Operating Range: 90-132 VAC/216-264 VAC, 50/60 Hz
AC Line Voltage: 50/60 Hz; User Selectable; 120V/240V (-15%, +10%)
AC Input Connector: Neutrik PowerCon (NAC 3MPA)
AC Loop-thru: Neutrik PowerCon (NAC 3MPB)
AC Current Requirement: 6A per system at 120V, 3A per system at 240V
Enclosure:
Box Construction: 5/8 in. multi-ply exterior grade Baltic birch. Internally
braced. Black DuraFlex™ finish.
Suspension System: 13 M10 Fittings, 35 mm pole mount socket
Grille: 14 Gauge Black powder-coated perforated steel with
foam backing.
Dimensions (H x W x D): 613 x 434 x 359 mm
24.1 x 17.1 x 14.1 in
Net Weight: 24.7 kg (55 lb)
| - 2-way active 12” bass reflex PA speaker
- High-efficiency 500 watts RMS digital power stage and 132 dB max. SPL
- Multi-purpose design for fullrange, satellite and monitor applications
- Application presets for quick frequency response contouring
- BEM optimized HF waveguide for uniform coverage
- 12” custom woofer and BMS compression driver
- DynX® DSP technology for distortion-free performance
- 2 line/mic input channels with individual gain controls plus mono mix out
- 15 mm birch ply cabinet with ultra rugged polyurea finish and M10 suspension points
Engineered for rock-solid reliability day in, day out this active 2-way system is a truly professional performer. With its multi-purpose bass reflex construction and carefully contoured, user-friendly presets it is equally suitable for fullrange, satellite or floor monitor applications. The Stinger® 12 A G3 is powered by high efficiency Class D amplification with a mighty 500 watts RMS output. It drives a custom designed 12” woofer and BMS compression driver delivering extended low frequency response and smooth, crisp highs. The HF waveguide has been designed using BEM, the numerical modeling of sound radiation and propagation. It reduces floor and ceiling reflections, effectively eliminates side lobes and achieves a controlled uniform coverage pattern. The Stinger® 12 A G3 incorporates LD Systemsʼ proprietary DynX® DSP technology to ensure top-level performance with maximum clarity and punch at all times. Processing includes crossover and multiband limiter functions for accurate time alignment and pristine, distortion-free audio. Designed to be a real workhorse throughout, the enclosure is made of rigid birch ply and coated with ultra tough polyurea for extraordinary strength and durability. Sporting a steel front grille, Dual-Tilt pole receptacle, multiple suspension points and ergonomic handles the Stinger® 12 A G3 is an attractively priced choice for truly professional sound reinforcement. A large selection of accessories facilitate live and installed applications.
Product type
PA loudspeaker
Low/mid driver dimensions
12 "
Woofer voice coil (mm)
63.5 mm
HF Driver Voice Coil
25.4 mm
Dispersion (H x V)
90 x 50 °
Frequency response
58 - 20000 Hz
Protection circuits
Multiband limiter , over voltage , over-current , thermal overload
Controls
2 x gain , 2 x Mic/Line , mode
Indicators
limit , Mic , mode , on , protect (protection circuit engaged) , signal
Line input connectors
6.3 mm Jack , XLR
Line output connectors
XLR
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching)
Operating Temperature
- 40 °C
Relative Humidity:
<80% (non-condensing)
Cabinet material
15 mm Plywood
Cabinet construction
vented
|
Reviews
There are no reviews yet.