YAMAHA P-5000S 2X750W POWER AMPLIFIER

Yamaha P5000S P Series II Stereo Power Amplifier (750 Watts)
The new P-Series amps are an ideal match to Yamaha's popular Club Series
loudspeakers and deliver a robust amount of pro quality power in a wide range
of configurations designed to suit most any need. To achieve this, they're
designed with big power output, and equipped with YS (Yamaha Speaker)
Processing to deliver a signal that is tuned to the needs of the Club Series
loudspeakers. All models feature both XLR and 1/4-inch TRS inputs and Neutrik
Speakon (tm), 1/4 in., and 5-way binding post outputs to make connections quick
and easy. Other features include Yamaha's exclusive EEEngine technology which
delivers high performance with exceptional efficiency, sweepable high and low pass
filters for optimizing output to any loudspeakers, compact and durable 2U chassis,
and variable speed cooling fans.
Big Output Power Delivered with Great Efficiency
The new P-Series Power Amplifiers deliver a robust amount of professional quality
power in a wide range of configurations designed to suit most any need. In a 4- ohm
bridged application, the P7000S delivers 3200 watts, the P5000S delivers 2600 watts,
the P3500S 2000 watts, and the P2500S 1300 watts.
Those on a budget will find the lineup's high power output and affordable prices deliver
higher quality without putting a strain on funds. Further savings are realized with extremely
efficient operation utilizing Yamaha's exclusive EEEngine technology which keeps
operational costs down by significantly reducing AC power consumption and heat generation.
The Perfect Match with Your Club Speakers
The new P-Series Power Amplifiers can be used with any loudspeaker system, but if you're
using our Club Series, they will provide power and performance tailored to deliver maximum
performance from your system. In an 8-ohm stereo application power output per channel on
the P7000S is 700 watts, the P5000S 500 watts, the P3500S 350 watts, and the P2500S
250 watts. This wide selection lets you choose the amplifier that best matches the power
handling capabilities of your speaker system.
All four models are equipped with independent sweepable high and low pass filters on each
channel so you can optimize output for subwoofer or full range systems to provide peak audio
quality and performance from any speaker system you may be using.
Light Weight Keeps Transport and Setup Easy
Look at the specifications and you'll notice that the P2500S and P3500S are respectably light
in weight making transport and setup less strenuous. What's amazing though, is the comparison
in weight per watt when you look at the P5000S and P7000S. The use of a switching power supply
makes these two models very lightweight while maintaining superior audio quality.
Flexible Connectivity
To provide the most flexible connectivity possible, all four models are equipped Neutrik Speakon
(tm) output jacks, and 1/4-inch output jacks for each channel in addition to 5-way binding post.
Channel inputs consist of both XLR and 1/4-inch TRS jacks.
* Speakon is the registered trademark of Neutrik AG.
Other Features
The new P-Series' industrial design delivers a refined and impressive look with deep blue faceplates
bordered in silver trim, handles, and mounts. The chassis is specially designed to provide added
durability and strength. Continuously variable-speed fans mounted internally on either side of the front
panel offer quiet, efficient cooling. Comprehensive protection consists of power on/off muting, DC
detection, thermal protection, current limiting, and a protective cover for the attenuators is also supplied.
EEEngine
EEEngine (Energy Efficient Engine) Technology makes more efficient use of AC power by reducing
power consumption and heat generation without degrading output power or sound quality. When power
requirements are low, the system uses a highly efficient current buffer to transparently switch input power
on and off as needed. As power requirements increase, an independently responding auxiliary power line
supplies additional power as required. Output isn't compromised, as the auxiliary power line is driven
by the power supply voltage, which maintains maximum output to the speaker load.
YS Processing
With YS Processing (Yamaha Speaker Processing), you get direct compatibility with our popular Club
Series loudspeaker systems. This special circuit optimizes output from the power amplifier to match the
characteristics of Club Series speaker systems delivering a signal that is precisely what the speaker requires.
With the YS Processing system, extra-smooth highs and enhanced low frequency from your Club Series
loudspeaker system is assured.

Technical Description
Specifications
Output Power
1kHz, THD+N=1% 8 Ohms Stereo: 525W + 525W
1kHz, THD+N=1% 4 Ohms Stereo: 750W + 750W
1kHz, THD+N=1% 8 Ohms Bridge: 1500W
20Hz-20kHz, THD+N=1% 8 Ohms Stereo: 500W + 500W
20Hz-20kHz, THD+N=1% 4 Ohms Stereo: 700W + 700W
20Hz-20kHz, THD+N=1% 8 Ohms Bridge: 1400W
1kHz, 20mS nonclip 2 Ohms Stereo: 1300W + 1300W
1kHz, 20mS nonclip 4 Ohms Bridge: 2600W
Power Bandwidth (half power): 10Hz-40kHz (THD+N=0.5%)
THD+N (20Hz - 20kHz, half power): Maximum 0.1%
Intermodulation Distortion (60Hz: 7kHz, 4:1, half power: Maximum 0.1%
Frequency Response: 0dB, +0.5dB, ? 1dB f=20Hz-50kHz
Channel Separation: Minimum 70dB 1kHz
Residual noise (Att. min.): Maximum 70dB
S/N Ratio: 103 dB
Damping Factor: 350 max.
Sensitivity @8 Ohms +6dB
Voltage Gain (Att. max): 32.1dB
Input Impedance: 30kOhms balanced; 15kOhms unbalanced
Controls
Front Panel: POWER switch (push on/push off) attenuator (31position) x 2
Rear Panel:
MODE switch (STEREO/BRIDGE/PARALLEL)
FILTER switch (SUB WOOFER/LOW CUT/OFF) x 2
FREQ. CONTROL (25Hz-150Hz) x 2
YAMAHA SPEAKER PROCESSING switch (ON/OFF)
Connectors
Input: XLR-3-31 type/ch, 1/4 in.
Output: SPEAKON, 5-way biding post, 1/4" phone/ch
Indicators
POWER: x 1 (Green)
PROTECTION: x 1 (Red)
TEMP: x 1 (Red) heatsink temp 85°
YS PROCESSING: x 1 (Yellow)
SIGNAL: x 2 (Green)
CLIP: x 2 (Red)
Load Protection
POWER switch on/off mute
DC-fault power output cut
Amplifier Protection
Thermal (heatsink temp 90°C
VI limiter
Limiter Circuit: Comp. THD 0.5%
Cooling: Dual variable-speed fan / Single variable-speed fan
Power Requirements: USA/120V 60Hz
Idle Power Consumption: 35W
1/8 Power Consumption: 550W
Maximum Power Consumption (4 Ohms): 3000W
Dimensions (W x H x D): 18-7/8 in. x 3-7/16 in. x 17-15/16 in.
Weight: 30.9 lbs / 14 kg.

XR Series - Intelligent Power
New Horizons.

A lightweight with enormous power output. Combined with digital signal processing.
That's what we call flexibility! Locally controlled or completely networked.
No matter what the requirements are.
The integrated powerful digital signal processor (DSP) and controller allows
for a troublefree and easy adjustment to any acoustical environment.
Wear-free digital potentiometers, sequential remote power on,
alive contacts for easy supervision, computer controlled monitoring -
 its enless list of useful feature make it the right choice for any installation.
XR - the new definition of Intelligent Power

High Tech SMT Design
Digital Signal Processor
Excellent sound and superior impulse response
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
PHOENIX / Speakon
High-End Switched Power Supply with Power Factor Correction (not XR4000)
LED Indicators for SIGNAL, CLIP, PROTECT, POWER
Temperature controlled, variable speed low noise fans
Digital wear-free Volume Controls (can be operated manually)
Stereo / Bridged / Parallel Mode
Softstart
Sequential Remote Power On
Alive Contact
Paging Input
Monitor Output
SXL Dataport
Perfect Weight-to-Power ratio
3 Years Warranty

Technical Data:
XR 2000:  2x 1400 W @ 2 Ohm
              2x 1000 W @ 4 Ohm
Class:  H
Frequency Response:20 Hz - 20 kHz (0 / -0.3 dB)
THD:  < 0.02%
Signal-to-Noise Ratio:  < -106 dB
Channel Seperation:  > 85 dB
Input Sensitivity:  +6 dBu
Input Clipping:  22 dBu
Input Impedance:  20 kOhm
Damping Factor:  750 to 1200 @ 4 Ohm
Cooling:  4 Fans (temp. reg. variable speed)
Weight:  8 kg
Dimensions:  2 RU / 483 x 88 x 454 mm(19" x 3.5" x 17.9“)

InterM V-2000 Power amplifier 2Χ550W/4ohm, 2Χ300W/8ohm, 2Χ900W/2ohm bridge 1900W/4ohm

Crownʼs new CTs series of power amplifiers are remarkable for their loud, punchy sound; sustained, tight bass; and superior protection against overheating and overload. This paper explains the design features behind those advantages. After reading this information, youʼll know why Crown CTs amps sound better than the competition. CTs amplifiers can provide large amounts of power into various loads, such as 2, 4, 8 ohms and 70V. With most power amps, the maximum output power tends to drop as the load impedance increases. But with the CTs series, the power stays the same at almost any impedance. 2-ohm Dual (per Ch.) 250W 4-ohm Dual (per Ch.) 600W 8-ohm Dual (per Ch.) 600W 16-ohm Dual (per Ch.) 300W 70V Dual (per Ch.) 600W 4-ohm Bridge 500W 8-ohm Bridge 1200W 16-ohm Bridge 1200W 140V Bridge 1200W Crown switching power supply for less weight Sustained Power on long-duration signals due to regulated, "stiff” power supplies with incredible energy storage (huge filter capacitors). Extra Hidden Power during high-level transients and during incomplete use of all the channels. Overheating and overload protection thanks to the sophisticated TLC circuitry which compresses the signal only when needed. Compression is controlled not by temperature, but by signal voltage. This keeps the loudness up during compression more than with competitive amps.