YAMAHA CBR-12 Passive Speaker

The CBR12 is the most compact model in its series. While delivering astonishing power for its size and weight, the CBR12 is ideal for both portable and installed applications.

Electro-Voice ZX3-60B - 600-Watt, 12” two-way loudspeaker system, bi-amp or passive, 60 X 60 horn, integral stand mount, Neutrik Speakon, Black

This item is BLACK.

The Electro-Voice ZX3-60B is a 2-way P.A. passive loudspeaker with a 600-watt continuous power handling capacity and a 60x60° coverage angle, for long-throw and cluster applications. The high-tech, high-impact polypropylene enclosure houses a 12" woofer and a 1" Neodymium compression driver with a large 2" voice-coil.
The ZX3-60B cabinet is equipped with 10 integral suspension points for permanent suspension or bracketing, and 3 Anchor Plates for single-stud fittings, with an additional pair of Anchor Plate attachment points on the bottom of the speaker.

• 2-way 600-watt suspension P.A. speaker with 60x60° coverage for long-throw and cluster applications
• High output, 131dB SPL capacity
• Adjustable feet allow 45° or 55° speaker placement angle for use as stage monitor
• 12" forced-air-cooled woofer, 1" titanium diaphragm compression driver with 2" voice coil
• Rugged, high-tech polypropylene enclosure
• 3 suspension Anchor Plates, 10 M8 insert suspension points Additional Information on the ZX3-60B

Todayʼs sound reinforcement and public address applications require equipment that guarantee exceptional sound quality for a large variety of different events. Multi-functionality is a must in order to be able to react on-site to varying customer demands. The DYNACORD VL122 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL122 is ideally suited to be used in most demanding applications. The VL122 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies the rugged DND 12350 Transducer is used. High frequencies are radiated from a rotatable 90°*45° CAD optimized constant directivity horn equipped with an Electro-Voice ND6 1.4” driver. The VL122 can be used in passive fullrange mode and can be switched from the outside to ʽbiampedʼ operation. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available. EASE and Ulysses data allow fast and precise simulations.

Order-# D113103 Cabinet Full-Range Configuration passive 2-Way or Biamped Mode Nominal Impedance 8 ohms Rated Power RMS 400 watts Program Power 800 watts Peak Power 1600 watts SPL 2,83 V/1m 99 dB max. SPL 1m (calc. with Peak) 131 dB Freq. Range (-10 dB) 60Hz - 20Hz Coverage Angle nom. 90° x 45° Passive X-Over Frequency 1,5 kHz VCT Protections yes Components HIGH Ev ND6-8 Order-# D361493 Components LOW DND 12350 Order-# D366559 Connectors SPEAKON 2x NL 4MPR Pin Wiring Normal/Fullrange 1+/1- Pin Wiring Biamped HF 2+/2- Pin Wiring Biamped LF 1+/1- Dimensions (WxHxD) mm 385x 715x 374 Net Weight 24 kg Enclosure Material Birch Plywood Finish Black 2-Component Structure Paint Grille Powder Coated Steel, Acoustic Foam

The Rx-112/75 is a 12-inch two-way, full-range loudspeaker system with 350 watts continuous, 1,200 watts peak power handling. Can be easily biamped DH7 3-inch voice coil compression driver delivers beautifully detailed sound Asymmetrical 75° x 50° fully rotatable constant-directivity horn. In the factory-delivered position, the horn provides a 15°up/35° down vertical coverage pattern. The fully rotatable horn means that regardless of cabinet position, pattern control is fully user-determined.

Features

    * DVX3121 12" LF Transducer with forced air cooling
    * ND2 2" Voice Coil, 1" Exit Neodymium CompressionDriver
    * 60° x 60° Coverage Pattern
    * 600W Continuous (2400W peak) power handling
    * High sensitivity, 131 dB maximum SPL
    * Adjustable monitor angle (45° or 55°)
    * 2 Anchor plates for single stud fittings and 7integral suspension points
    * Available in black or white
    * Passive/biamp selectable
    * Full line of accessories

Specifications

    * Frequency Response (-3dB): 58Hz-15kHz
    * Frequency Range (-10dB): 48Hz-20kHz
    * Rec. Hipass Frequency: 50Hz
    * Axial Sensitivity: 97dB (1W/1m)
    * Max. Calculated SPL: 131 dB
    * Horizontal Coverage: 60°
    * Vertical Coverage: 60°
    * Power Handling (Passive): 600W continuous, 1200Wprogram, 2400W peak
    * LF Power Handling (Biamp): 500W continuous, 1000Wprogram, 2000W peak
    * HF Power Handling (Biamp): 40W continuous, 80Wprogram, 160W peak
    * LF Transducer: DVX3121, 12" driver
    * HF Transducer: ND2, 1" exit Neodymium compressiondriver
    * Crossover Frequency: 2kHz
    * Nominal Impedance: 8 ohms
    * Minimum Impedance: 6.2 ohms
    * Connectors: (2) Neutrik Speakon NL4\'s
    * Enclosure Material: Polypropylene structural foam
    * Suspension: Enclosure has locations for 4 single-studattachment plates and10 forged steel eyebolts - 2 on top, 2 on bottom, 2 onside, and 1 on rear ofenclosure
    * Grille: Polyester powder coated, 16GA Galvanizedsteel, with rotatable logo
    * Dimensions (H x W x D): 24.14" x 15.64" x 14.26“
    * Net Weight: 43.7 lbs
    * Shipping Weight: 48.6 lbs

The DYNACORD VL212 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL212 is ideally suited to be used in most demanding applications. The VL212 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies two rugged DND 12350 transducers are used. The in-line topology guarantees excellent pattern control even for the low-mid frequency range. High frequencies are radiated from a rotatable 90°*45° CAD optimized constant directivity horn equipped with an Electro-Voice ND6 1.4” driver. The VL212 can be used in passive fullrange mode and can be switched from the outside to ʽbiampedʼ operation. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available. EASE and Ulysses data allow fast and precise simulations. The VL212 can be used as a general purpose stand-alone fullrange cabinet and as a satellite or delayed system cabinet in larger set ups.

Order No. D 113 133 Cabinet Full-Range Configuration Passive 2-Way Switchable to biamped mode Nominal impedance 4 Ohms Rated power RMS 800 Watts Program power 1600 Watts Peak power 3200 Watts SPL 2,83 V / 1m 2W / 4 Ohm 105 dB Max. SPL 1m (calculated with peak power) 137dB Frequency range ( -10dB ) Full range 80Hz - 19kHz Frequency range ( -10dB ) measured with H5000-RCM26 preset 50Hz - 19kHz Coverage angle 1 kHz -6dB 90° * 45° Passive crossover frequency 1.5kHz Active crossover frequency 1.5kHz 24dB/Oct. Linkwitz-Riley, 1,5kHz Linear-Phase FIR Voice coil tracking protection Yes Component HIGH Electro-Voice ND6-8 Neodymium Order No. 361493 Component LOW 2 x DND 12350 Order No. 366559 Connectors Full-Range 1+, 1- Wired through 2+, 2- Connectors Biamped Lo 1+, 1- Hi 2+, 2- Wired through 1+, 1-, 2+, 2- Connector model Speakon 2x NL4 MPR Dimensions (WxHxD) 385x1035x374mm Shipping weight kg Net weight 34kg Enclosure material Birch plywood Finish Black, 2-component paint Grille Powder coated steel, acoustic foam Handles 2