YAMAHA WX-C50 Wireless Streaming Amplifiers (Dark Silver)

Connections

The SLX1 bodypack transmitter is designed to hold up to the most adverse conditions. Whether used with headworn, lavalier, instrument microphones, or with guitars or basses, the SLX1 is the definition of reliability.

The SLX1 bodypack transmitter is designed to hold up to the most adverse conditions. Whether used with headworn, lavalier, instrument microphones, or with guitars or basses, the SLX1 is the definition of reliability.

• Automatic Transmitter Setup
• Backlit LCD with timeout feature
• Frequency and power lockout
• 3-segment battery fuel gauge
• 2 AA batteries (included) provide 8 hours of continuous use
• 518 - 782 MHz operating range

Audio Input Level

-10 dBV maximum at mic gain position

+10 dBV maximum at 0 dB gain position

+20 dBV maximum at -10 dB gain position

Gain Adjustment Range

30dB

Input Impedance

1 MΩ

RF Transmitter Output

30 mW maximum (dependent on applicable country regulations)

Dimensions

108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)

Weight

81 grams (3 oz.) without batteries

Housing

Molded ABS case

Power Requirements

2 "AA” size alkaline or rechargeable batteries

Battery Life

>8 hours (alkaline)

• Simply add two speakers to make a wireless music system
• Use on its own or add to any other MusicCast enabled product to expand your multi-room system
• Powerful 70-watt amp can drive most speakers and it supports hi-res audio
• Easy installation - Suitable size for 1U rack with a width of 214 mm (8-3/8“) and height of 42 mm (1-5/8“) (without feet).
• 2 year warranty & 1.8w low standby power consumption

Shure SLX2-BETA87C-R5 Wireless Microphone

Features:

Automatic Transmitter Setup
Backlit LCD with timeout feature
Frequency and power lockout
3-segment battery fuel gauge
2 AA batteries (included) provide 8 hours of continuous use
518 - 782 MHz operating range

Operating Range Under Typical Conditions

100m (300 ft.)

Note: actual range depends on RF signal absorption, reflection, and

interference

Audio Frequency Response (+/? 2 dB)

Minimum: 45 Hz

Maximum: 15 kHz

(Overall system frequency depends on microphone element.)

Total Harmonic Distortion (ref. +/? 38 kHz deviation, 1 kHz tone)

0.5%, typical

Dynamic Range

>100 dB A-weighted

Operating Temperature Range

?18°C (0°F) to +50°C (+122°F)

Note: battery characteristics may limit this range

Transmitter Audio Polarity

Positive pressure on microphone diaphragm (or positive voltage applied

to tip of WA302 phone plug) produces positive voltage on pin 2 (with

respect to pin 3 of low impedance output) and the tip of the high

impedance 1/4-inch output.

SLX1 Bodypack Transmitter

Audio Input Level

-10 dBV maximum at mic gain position

+10 dBV maximum at 0 dB gain position

+20 dBV maximum at -10 dB gain position

Gain Adjustment Range

30dB

Input Impedance

1 MΩ

RF Transmitter Output

30 mW maximum (dependent on applicable country regulations)

Dimensions

108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)

Weight

81 grams (3 oz.) without batteries

Housing

Molded ABS case

Power Requirements

2 ?AA? size alkaline or rechargeable batteries

Battery Life

>8 hours (alkaline)

SLX2 Handheld Transmitter

Audio Input Level

+2 dBV maximum at -10dB position

-8 dBV maximum at 0dB position

Gain Adjustment Range

10dB

RF Transmitter Output

30 mW maximum (dependent on applicable country regulations)

Dimensions (including SM58 cartridge)

254 mm x 51 mm dia. (10 x 2 in.)

Weight

290 grams (10.2 oz.) without batteries

Housing

Molded PC/ABS handle and battery cup

Power Requirements

2 ?AA? size alkaline or rechargeable batteries

Battery Life

>8 hours (alkaline)

SLX4 Receiver

Dimensions

42 mm H x 197 mm W x 134 mm D (1.65 x 7.76 x 5.28 in.)

Weight

816 g (1 lb. 13 oz.)

Housing

Galvanized steel

Audio Output Level (ref. +/? 38 kHz deviation with 1 kHz tone)

XLR connector (into 600 Ω load): ?13 dBV

1/4 inch connector (into 3000 Ω load): ?2 dBV

Output Impedance

XLR connector: 200 Ω

1/4 inch connector: 1kΩ

XLR output

Impedance balanced

Pin 1: Ground

Pin 2: (+)

Pin 3: (-)

Sensitivity

?105 dBm for 12 dB SINAD, typical

Image Rejection

>70 dB, typical

Power Requirements

12?18 Vdc at 150 mA, supplied by external power supply

Technical Data
 RF frequency range  518..... 866 MHz 
 Transmission/receiving frequencies  1440 
 Presets  4 
 Switching bandwidth  36 MHz 
 Peak deviation  +/- 48 kHz 
 Compander  HDX 
 Frequency response (microphone)  40.....18000 Hz 
 Signal-to-noise ratio  > 110 dB(A) 
 THD, total harmonic distortion   In compliance with  ETS 300422 , ETS 300445 , CE , FCC 
 Antenna connector  2 BNC, 50 Ohm 
 Audio-XLR connector  6,3 mm 
 Audio output level (balanced)  XLR: +18 dBu max 
 Audio output level (unbalanced)  Jack: +12 dBu max
 Power supply  10,5 - 16 V DC battery AA (Mignon)
 Dimensions (Receiver)  212 x 145 x 38 mm 
 Weight (Receiver)  1100 g 
 RF output power  30 mW 
 Power supply  2x 1.5 V battery AA (Mignon)
 Operating time (transmitter)  > 8 h 
 Input voltage range  1,8 V line
 Input voltage range  2,4 V line
 Dimensions (Transmitter)  82 x 64 x 24 mm 
 Weight (Transmitter)  158 g 

• Wireless in-ear monitor system with unique signal processing capabilities for live applications and professional installations

The IVM 4 is the first system ever to combine all the features required for professional in-ear monitoring in a single, compact device. The IVM 4 allows the input signal to be processed individually to meet the requirements of both the artist and the sound system environment.

Unique integrated signal processing for a natural listening experience and a complete set of inputs and outputs make the IVM 4 an ideal tool for professional applications.

1 SST 4 stereo transmitter

1 SPR 4 bodypack stereo receiver

1 pair IP 2 earphones

1 rod antenna
1 rack mounting kit
2 AA size batteries
12-pc. color code set
1 AC adapter