| Content |
Connections
| REAR:
Aux in (via 2 x RCA/phono)
Aux out (via 2 x RCA/phono)
Stereo pre-out (via 2 x RCA/phono)
Subwoofer pre-out (via RCA/phono)
Digital optical audio in (via toslink)
Digital optical audio out (via toslink)
Coaxial digital audio out (via RCA/phono)
USB socket
Wireless antenna socket
Network socket (via RJ45)
Remote in
Trigger in & out
OTHER:
Wireless networking
Bluetooth connection
Apple Airplay
MusicCast
DLNA certified | | DAC/Digital bits | Up to 192kHz/24 bit | | Extra | Bluetooth connection.
Apple AirPlay.
DLNA certified for network connection. | | Networking | Wired or wireless networking | | Supplied accessories | Remote control, stand | | Tuner | Internet radio tuning. | | W x H x D (mm) | 215 x 51.5 x 245.9 (214 x 123.6 x 245.9 with antenna) | | Weight (kg) | 1.44 |
|
The IR-200M is a handheld infrared wireless microphone. It eliminates problems with interference or eavesdropping, allowing simultaneous use in adjacent conference rooms or school classrooms. Since infrared wireless microphone system uses a frequency band that does not interfere with that of the TS-800 and TS-900 series infrared conference system, both systems can be simultaneously installed in the same location.
| Battery | IR-200BT-2 rechargeable battery for the infrared wireless microphone (option)
or AA alkaline dry cell battery (2 pieces). | | Current Consumption | Typ. 250 mA (2.4 V, Power selector switch: N)
Typ. 340 mA (2.4 V, Power selector switch: H) |
Infrared Emitter
| Wavelength | 870 nm (AM: Brightness modulation) | | Modulation Method | Frequency modulation | | Carrier Frequency | Channel A: 3.100 MHz
Channel B: 3.350 MHz | | Transmission Distance | Approx. 20 m (65 ft) (Power selector switch: H, in an unobstructed space)
Approx. 15 m (50 ft) (Power selector switch: N, in an unobstructed space) | | Tone Signal | 32.768 kHz | | Modulation Sensitivity | ±4.8 kHz (1 kHz, when SPL of 84 dB is input) | | Maximum Input Sound Pressure | 120 dB SPL | | Microphone Unit | Unidirectional electret condenser microphone | | Frequency Response | 100 Hz - 12 kHz | | Preemphasis | 300 μs | | Battery Operation Time | Approx. 8 h (when the IR-200BT rechargeable battery for the infrared wireless
microphone is used, Power selector switch: N)
Approx. 6 h (when the alkaline battery is used, Power selector switch: N) | | Operating Temperature | 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F) | | Operating Humidity | 30 % to 85 %RH | | Finish | Control section: ABS resin, metallic gray, paint, 50% gloss
Filter section: Polycarbonate, optical cut filter | | Dimensions | φ37 × 241.8 (H) mm (φ1.46" × 9.52“) | | Weight | 170 g (0.37 lb) (with battery) | | Accessory | Screw driver (for setting) …1, Color label (6 colors) …1 |
|
SHURE SLX2-SM86-R5 - Handheld Transmitter with SM58 Microphone
|
The SLX1 bodypack transmitter is designed to hold up to the most adverse conditions. Whether used with headworn, lavalier, instrument microphones, or with guitars or basses, the SLX1 is the definition of reliability.
The SLX1 bodypack transmitter is designed to hold up to the most adverse conditions. Whether used with headworn, lavalier, instrument microphones, or with guitars or basses, the SLX1 is the definition of reliability.
- Automatic Transmitter Setup
- Backlit LCD with timeout feature
- Frequency and power lockout
- 3-segment battery fuel gauge
- 2 AA batteries (included) provide 8 hours of continuous use
- 518 - 782 MHz operating range
Audio Input Level
-10 dBV maximum at mic gain position
+10 dBV maximum at 0 dB gain position
+20 dBV maximum at -10 dB gain position
Gain Adjustment Range
30dB
Input Impedance
1 MΩ
RF Transmitter Output
30 mW maximum (dependent on applicable country regulations)
Dimensions
108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)
Weight
81 grams (3 oz.) without batteries
Housing
Molded ABS case
Power Requirements
2 "AA” size alkaline or rechargeable batteries
Battery Life
>8 hours (alkaline)
|
The WM-5320 lavalier wireless microphone has been manufactured for use with a UHF system. It employs an omni-directional electret condenser microphone element and has been designed for use in speech reinforcement applications. The built-in compressor-expander circuit minimizes the influence from ambient noise.
| Microphone Element | Electret condenser microphone, omni-directional pattern | | Modulation | Frequency modulation | | Frequency Range | 636 - 865 MHz*, UHF | | Channel Selectable | 64 channels
(the number of channels may differ from country to country) | | RF Carrier Power | 50 mW or less | | Tone Frequency | 32.768 kHz | | Oscillator | PLL synthesized | | Maximum Input Level | 110 dB SPL (Audio level control: Maximum position) | | Battery | LR6 (AA) | | Battery Life | 10 hours or more (alkaline) | | Indicator | Power/Battery lamps | | Antenna | Built-in type | | Operating Temperature | -10℃ to +50℃ | | Finish | Resin, coating | | Dimensions | 62 (W) × 102.5 (H) × 23 (D) mm | | Weight | 110 g (with battery) | | Accessory | Screw driver ……1, Storage case ……1, Neck strap ……1 |
|
The IR-520R Infrared Wireless Receiver is designed for exclusive use with the IR-702T Infrared Wireless Tuner. It can be mounted to a wall or a microphone stand.
| Power Source | 24 V DC (supplied from the IR-702T) | | Current Consumption | Max. 30 mA |
Infrared Detector
| Wavelength | 870 nm | | Carrier Frequency | Channel A: 3.100 MHz
Channel B: 3.350 MHz | | Reception Area | Approx. 15 m (50 ft) in a space without any obstacles | | Connection Terminal | 75 Ω, BNC jack | | Operating Temperature | 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F) | | Operating Humidity | 30 % to 85 %RH | | Finish | Filter section: Polycarbonate, optical cut filter | | Dimensions | 84.5 (W) × 63.5 (H) × 32 (D) mm (3.33" × 2.5" × 1.26“) | | Weight | 100 g (0.22 lb) (unit only) | | Accessory | Stand mounting bracket …1, Bracket mounting screw …2 |
|
Reviews
There are no reviews yet.