| Content | Rio Series I/O racks employ Dante network audio protocol for exceptional flexibility and freedom in setup and placement, while delivering natural, musical sound that brings out the full sonic potential of mixing consoles and other system components.
| General specifications |
|
|
|
| Sampling frequency rate |
External |
44.1kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) / 48kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) / 88.2kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) / 96kHz: +4.1667%, +0.1%, -0.1%, -4.0% |
| Signal delay |
Less than 3ms INPUT to OUTPUT, connect with CL5 using Dante, Dante Receive Latency set to 0.25ms (one way), Fs=48kHz |
| Total harmonic distortion |
Less than 0.05% 20Hz-20kHz@+4dBu into 600Ω, Fs=44.1kHz, 48kHz / Less than 0.05% 20Hz-40kHz@+4dBu into 600Ω, Fs=88.2kHz, 96kHz INPUT to OUTPUT, Input Gain = Min. |
| Frequency response |
+0.5, -1.5dB 20Hz-20kHz, refer to +4dBu output @1kHz, INPUT to OUTPUT, Fs=44.1kHz, 48kHz / +0.5, -1.5dB 20Hz-40kHz, refer to +4dBu output @1kHz, INPUT to OUTPUT, Fs=88.2kHz, 96kHz |
| Dynamic range |
108dB typ., INPUT to OUTPUT, Input Gain = Min |
| Crosstalk |
-100dB, adjacent INPUT/OUTPUT channels, Input Gain = Min. |
| Power requirements |
US/Canada: 120V 60Hz, Japan: 100V 50/60Hz, China: 110-240V 50/60Hz, Korea: 220V 60Hz, Other: 110-240V 50/60Hz |
| Power consumption |
120W |
| Dimensions |
W |
480mm (18 7/8in) |
| H |
232mm (9 1/4in) |
| D |
362mm (14 1/4in) |
| Net weight |
12.4kg (27.3lb) |
| Accessories |
Dante Virtual Soundcard license sheet |
| Others |
Temperature Range: Operating temperature range: 0 - 40℃, Storage temperature range: -20 - 60℃ |
Analog input characteristics
| Input Terminals |
GAIN |
Actual Load |
For Use With |
Input Level |
Connector |
| Impedance |
Nominal |
Nominal |
Max. before clip |
| INPUT |
+66dB |
7.5kΩ |
50-600Ω Mics & |
-62dBu (0.616mV) |
-42dBu (6.16mV) |
XLR-3-31 type (Balanced)*1 |
| 1-32 (Rio3224-D) |
600Ω Lines |
| 1-16 (Rio1608-D) |
|
| 1-8 (Ri8-D) |
-6dB |
|
+10dBu (2.45V) |
+30dBu (24.5V) |
| Analog output characteristics |
|
|
|
|
|
|
|
|
|
|
| Output Terminals |
Actual Source |
For Use With |
Max.Output Level |
Output Level |
Connector |
| Impedance |
Nominal |
Select SW*4 |
Nominal |
Max. before clip |
| OUTPUT |
75Ω |
600Ω Lines |
+24dB (default) |
+4dBu (1.23 V) |
+24dBu (12.3V) |
XLR-3-32 type (Balanced)*1 |
| 1-16 (Rio3224-D) |
| 1-8 (Rio1608-D, Ro8-D) |
+18dB |
-2dBu (616mV) |
+18dBu (6.16V) |
| Digital Input & Output Characteristics |
|
|
|
|
|
|
|
| Terminal |
Format |
Data length |
Level |
Audio |
Connector |
| Primary/Secondary |
Dante |
24bit or 32bit |
1000Base-T |
24ch Input/32ch Output (Rio3224-D) |
etherCON Cat5e (Rio3224-D, Rio1608-D) |
| 8ch Input/16ch Output (Rio1608-D) |
RJ-45 (Ri8-D, Ro8-D) |
| 8ch Output (Ri8-D) |
|
| 8ch Input (Ro8-D) |
|
| Digital Output Characteristics |
|
|
|
|
|
|
|
|
| Terminal |
Format |
Data length |
Level |
Connector |
| AES/EBU OUT 1/2 - 7/8 *1 |
AES/EBU Professional Use |
24bit |
RS422 |
XLR-3-32 type (Balanced)*2 |
|
28-channel multicore with permanently attached 30-metre cable terminating in Adam Hall XLR plugs. The all-metal stage box has a solid strain relief in the transitional area between box and cable. The protruding sides optimally protect the sockets on the stage box against damage. With a built-in handle for ease of handling and prepared mounting possibilities for permanent installation. The additionally reinforced transition to the terminations prevents fatigue and cable breakage. For 24 send and four return paths. Fifty-metre cable length available on request.
Product type
Pre-assembled Cables
Type
Multicore cable
Channels
28
Pin-out
24/4
Length
30 m
Colour
Black
Cable diameter
23.6 mm
Cross section
0.314 mm²
Connector 1-A (built into drum / stage box)
XLR
Number of connectors connector 1-A
24
Gender of connector 1-A
female
Poles of connector 1-A
3
Contacts of connector 1-A
Nickel-silver
Manufacturer of connector 1-A
Adam Hall
Model number connector 1-A
Custom-made
Connector 1-B (built into drum / stage box)
XLR
Number of connectors connector 1-B
4
Gender of connector 1-B
male
Poles of connector 1-B
3
Contacts of connector 1-B
Nickel-silver
Manufacturer of connector 1-B
Adam Hall
Model number connector 1-B
Custom-made
Connector 2-A (splice)
XLR
Number of connectors connector 2-A
24
Gender of connector 2-A
male
Poles of connector 2-A
3
Contacts of connector 2-A
Nickel-silver
Manufacturer of connector 2-A
Adam Hall
Model number connector 2-A
Custom-made
Connector 2-B (splice)
XLR
Number of connectors connector 2-B
4
Gender of connector 2-B
female
Poles of connector 2-B
3
Contacts of connector 2-B
Nickel-silver
Manufacturer of connector 2-B
Adam Hall
Model number connector 2-B
Custom-made
Splice length
60 cm
Width
180 mm
Height
90 mm
Depth
385 mm
| Adam Hall K20C30 Stagebox 16/4, Metalbox with handle, 30m
Twenty-channel multicore with permanently attached 30-metre cable terminating in Adam Hall XLR plugs. The all-metal stage box has a solid strain relief in the transitional area between box and cable. The protruding sides optimally protect the sockets on the stage box against damage. With a built-in handle for ease of handling and prepared mounting possibilities for permanent installation. The additionally reinforced transition to the terminations prevents fatigue and cable breakage. For sixteen send and four return paths. Fifty-metre cable length available on request.
Product type
Pre-assembled Cables
Type
Multicore cable
Channels
20
Pin-out
16/4
Length
30 m
Colour
Black
Cable diameter
19.8 mm
Cross section
0.314 mm²
Connector 1-A (built into drum / stage box)
XLR
Number of connectors connector 1-A
16
Gender of connector 1-A
female
Poles of connector 1-A
3
Contacts of connector 1-A
Nickel-silver
Manufacturer of connector 1-A
Adam Hall
Model number connector 1-A
Custom-made
Connector 1-B (built into drum / stage box)
XLR
Number of connectors connector 1-B
4
Gender of connector 1-B
male
Poles of connector 1-B
3
Contacts of connector 1-B
Nickel-silver
Manufacturer of connector 1-B
Adam Hall
Model number connector 1-B
Custom-made
Connector 2-A (splice)
XLR
Number of connectors connector 2-A
16
Gender of connector 2-A
male
Poles of connector 2-A
3
Contacts of connector 2-A
Nickel-silver
Manufacturer of connector 2-A
Adam Hall
Model number connector 2-A
Custom-made
Connector 2-B (splice)
XLR
Number of connectors connector 2-B
4
Gender of connector 2-B
female
Poles of connector 2-B
3
Contacts of connector 2-B
Nickel-silver
Manufacturer of connector 2-B
Adam Hall
Model number connector 2-B
Custom-made
Split end length
60 cm
Width
180 mm
Height
90 mm
Depth
335 mm |
16 MIDAS-designed, fully programmable mic preamps for audiophile sound quality. 8 analog, servo-. balanced XLR outputs. AES50 network ports. 4-port ULTRANET distribution hub for powered connection of four BEHRINGER P16-M personal monitoring mixers. Digital audio and control connectivity for TURBOSOUND IQ speaker systems with ULTRANET networking capability. USB connector for system updates via PC.
| Brand | BEHRINGER |
|---|
| Model | SD16 | | Warranty | 1 Year | | Application | Broadcast, Concert, Installation, Portable PA, Studio |
|
Front panel, 2 Modules wide.
Punched for 2 x Socapex or Syntax SSX.
Material: 1.2mm/0.047" Steel
Weight: 0.13kg/0.28lb
Front 2x SOCAPEX module
- Width 2 modules
- Height 4U
- Note
- 1 Module = 44mm
- 1U (unit) = 44.5mm
- To construct a 19" rack enclosure a width of 10 modules is required
- Body Colour: Black
|
Stage box of 32 XLR inputs - 8 XLR outputs with 30m cable.
|
Reviews
There are no reviews yet.