Content | This subwoofer incorporates a number of Yamaha’s advanced and a high performance bass technologies such as Twisted Flare Port and Advanced YST II with discrete amp circuitry and high quality 10" woofer unit
This subwoofer incorporates a number of Yamaha’s advanced and a high performance bass technologies such as Twisted Flare Port and Advanced YST II (Yamaha Active Servo Technology II) with discrete amp circuitry and high quality 25 cm (10”) woofer unit. This results in sensational bass response that adds significantly to overall listening enjoyment of music and movies.
The black NS-SW100 from Yamaha is a powered 10" subwoofer designed to provide rich and impactful bass response, making it well suited for home theaters, game setups, and music reproduction. The NS-SW100 utilizes a twisted flare port, which reduces air turbulence noise when compared to a conventional port, resulting in clear and accurate low frequency reproduction.
The inclusion of Advanced Yamaha Active Servo Technology II (Advanced YST) allows the speaker and amplifier to work together to cancel out impedance so the speaker unit maintains linear motion and ensures the highest levels of sound pressure and overall performance. The rear panel offers a single RCA input, power switch, and volume control.
- New Twisted Flare Port contributes to clear and tight bass
- Advanced YST II (Yamaha Active Servo Technology II)
- 25 cm (10”) cone woofer
- Stylish addition to any room
Subwoofer Type |
Active |
Enclosure Type |
Bass-Reflex |
Amplifier Power Rating |
100 W Peak
50 W |
Drivers |
10" / 25.4 cm (Front-Firing) |
Ports |
1 |
Frequency Response |
25 to 180 Hz |
Impedance |
5 Ohms |
Magnetic Shielding |
None |
Connectivity |
1 x RCA Input (Audio) |
Phase Adjustment |
None |
Power
AC Input Power |
120 VAC, 60 Hz |
Power Consumption |
40 W |
Physical
Placement & Mounting Options |
Floorstanding |
Dimensions |
13.8 x 13.9 x 16.1" / 351 x 352 x 408 mm |
Weight |
26.5 lb / 12.0 kg |
|
Description Active balanced-drive closed-box subwoofer system
Drive units 2x Ø300mm (12 in) Rohacell® cone long-throw
Frequency range -6dB at 15Hz and 250Hz
Frequency response ±3dB 17Hz - 145Hz
Power output: 1000W
Rated power consumption: 135W
Standby power Consumption: 100dB
Functions: 5 Presets
Input sensitivity
Gain
Low-pass filter
Graphic equalisation
Room compensation
Auto on/standby
Trigger on/standby
Trigger preset switching
RS-232 automation control
Inputs: Stereo Line In (2x RCA Phono)
Mono (LFE) Line In (RCA Phono)
Mono (LFE) Line In (XLR balanced)
Dimensions Height:490mm (19.3 in) not including feet
Width: 460mm (18.1 in) including grilles
Depth: 410mm (16.2 in) including controls
Net weight 44kg (97 lb)
Cabinet finish Gloss Black
Cherrywood
Rosenut
Grille Black cloth
ALSO AVAILABLE IN Cherrywood, rosenut
|
Low Frequency Limit: 27Hz (EQ1) 21Hz (EQ2)
Upper Frequency Limit: 40 - 120Hz Variable
Power Output: 500W RMS (1000W Peak)
Low Pass Filter Alignment: Active 4th order 24dB/Octave (2nd stage filter)
Cabinet Specification: 25mm construction and internal bracing
Cabinet Alignment: sealed cabinet
Driver Complement: 1 x 12" C-CAM® sub woofer driver featured triple suspension and ling throw 3" voice coil
External Dimensions:
(H x W x D)
inc. amp & driver 340 x 340 x 410 mm
(13 3/8 x 13 3/8 x 16 1/8 inch)
External Dimensions:
(H x W x D)
inc. feet & grille 375mm (15“) high with feet
430mm (16 15/16“) deep
inc amp & grille
Mains Input Voltage Specification: 110 - 120 Vac / 220 - 240 Vac 50/60Hz
Individual Weight: 22.56 Kg (49.63 lb)
User's Manual
ΔΙΑΤΙΘΕΤΑΙ ΣΤΑ ΠΑΡΑΚΑΤΩ ΧΡΩΜΑΤΑ
|
Type Advanced YST II and QD-Bass Subwoofer
Driver 25cm(10'') cone
Dynamic Power 250 W
Frequency Response 20-160 Hz
Advanced YST Advanced YST II
QD-Bass Technology Front-firing
High-Efficiency Power Amplifier Yes
Linear Port Yes
BASS (Bass Action Selector System) Yes
Standby Power Consumption 0.3 W
Dimensions (W x H x D) 380 x 368 x 420 mm
Weight 18.5 kg
|
Dimensions | Metric :16-3/4” W x 16-3/4” D x 16-15/16” H | 42.5 x 42.5 x 43.0 cm
Driver Complement :One high-definition 14" long throw woofer, pressure coupled to two 14” low bass radiators
Frequency Response :11 Hz – 200 Hz
Internal Amplifier Power :1800 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :Two pairs of 5 way binding posts
High Level Outputs :Two pairs of 5 way binding posts
Subwoofer Inputs :One LFE input (for SW preout only)
Low Level Inputs :Two low level inputs: left and right low level in
Low Level Outputs :Two low level outputs: left and right low level out
High Level High Pass Crossover :Non Variable 6 dB/octave @ 80 Hz: Available only with high level inputs and outputs only
Low Level High Pass Crossover :12 dB/octave continuously variable from 40 Hz to 150 Hz: Available only with low level inputs and outputs
Low Pass Crossover% :24 dB/octave continuously variable from 40 Hz – 150 Hz: Available only with high level inputs and outputs or low level inputs and outputs
Available Finishes :Piano-Gloss Black
Accessories :Rubber feet; Isolation spikes
Fuse :8 amp 250 volt Slo Blo (US) | 4 amp 250 volt Slo Blo (International)
Weight | Metric :97 lbs | 44.0 kg
Warranty :5 Years; 3 Years for Amplifiers
|
Outer Flange Dimensions | (Metric) :15-1/2” W x 21” H | 39.4 x 53.3 cm
Cut Out Dimensions | (Metric) :14-3/8” W x 19-7/8” H | 36.5 x.50.5 cm
Depth from Flange | Metric :3-13/16” | 9.7 cm
Driver Complement :One 10" Long-Excursion Woofer coupled to one 10" infrasonic Radiator
Frequency Response :16 Hz – 200 Hz
Impedance :4 ohms
Required Amplifier :SubAmp 600 (available separately)
Inputs :One pair of gold plated spring loaded posts
Enclosure :Sealed Medite
Available Finishes :Paintable White
Accessories :Paint mask; Cut-out template; Paintable removable all metal grill
Packaging :One to a carton
Weight | (Metric) :30 lbs | 13.6 kg
|
Reviews
There are no reviews yet.