Content | Type Advanced YST II and QD-Bass Subwoofer
Driver 25cm cone
Dynamic Power 300 W
Frequency Response 20-160 Hz
Advanced YST Advanced YST II
QD-Bass Technology Down-firing
High-Efficiency Power Amplifier Yes
Linear Port Yes
BASS (Bass Action Selector System) Yes
Standby Power Consumption
Dimensions (W x H x D) 406 x 445 x 406 mm
Weight 21 kg |
Dimensions | Metric :16-3/4” W x 16-3/4” D x 16-15/16” H | 42.5 x 42.5 x 43.0 cm
Driver Complement :One high-definition 14" long throw woofer, pressure coupled to two 14” low bass radiators
Frequency Response :11 Hz – 200 Hz
Internal Amplifier Power :1800 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :Two pairs of 5 way binding posts
High Level Outputs :Two pairs of 5 way binding posts
Subwoofer Inputs :One LFE input (for SW preout only)
Low Level Inputs :Two low level inputs: left and right low level in
Low Level Outputs :Two low level outputs: left and right low level out
High Level High Pass Crossover :Non Variable 6 dB/octave @ 80 Hz: Available only with high level inputs and outputs only
Low Level High Pass Crossover :12 dB/octave continuously variable from 40 Hz to 150 Hz: Available only with low level inputs and outputs
Low Pass Crossover% :24 dB/octave continuously variable from 40 Hz – 150 Hz: Available only with high level inputs and outputs or low level inputs and outputs
Available Finishes :Piano-Gloss Black
Accessories :Rubber feet; Isolation spikes
Fuse :8 amp 250 volt Slo Blo (US) | 4 amp 250 volt Slo Blo (International)
Weight | Metric :97 lbs | 44.0 kg
Warranty :5 Years; 3 Years for Amplifiers
|
Outer Flange Dimensions | (Metric) :15-1/2” W x 21” H | 39.4 x 53.3 cm
Cut Out Dimensions | (Metric) :14-3/8” W x 19-7/8” H | 36.5 x.50.5 cm
Depth from Flange | Metric :3-13/16” | 9.7 cm
Driver Complement :One 10" Long-Excursion Woofer coupled to one 10" infrasonic Radiator
Frequency Response :16 Hz – 200 Hz
Impedance :4 ohms
Required Amplifier :SubAmp 600 (available separately)
Inputs :One pair of gold plated spring loaded posts
Enclosure :Sealed Medite
Available Finishes :Paintable White
Accessories :Paint mask; Cut-out template; Paintable removable all metal grill
Packaging :One to a carton
Weight | (Metric) :30 lbs | 13.6 kg
|
Low Frequency Limit: 27Hz (EQ1) 21Hz (EQ2)
Upper Frequency Limit: 40 - 120Hz Variable
Power Output: 500W RMS (1000W Peak)
Low Pass Filter Alignment: Active 4th order 24dB/Octave (2nd stage filter)
Cabinet Specification: 25mm construction and internal bracing
Cabinet Alignment: sealed cabinet
Driver Complement: 1 x 12" C-CAM® sub woofer driver featured triple suspension and ling throw 3" voice coil
External Dimensions:
(H x W x D)
inc. amp & driver 340 x 340 x 410 mm
(13 3/8 x 13 3/8 x 16 1/8 inch)
External Dimensions:
(H x W x D)
inc. feet & grille 375mm (15“) high with feet
430mm (16 15/16“) deep
inc amp & grille
Mains Input Voltage Specification: 110 - 120 Vac / 220 - 240 Vac 50/60Hz
Individual Weight: 22.56 Kg (49.63 lb)
User's Manual
ΔΙΑΤΙΘΕΤΑΙ ΣΤΑ ΠΑΡΑΚΑΤΩ ΧΡΩΜΑΤΑ
|
Dimensions | Metric :12” W x 12” D x 12-1/2” H | 30.5 x 30.5 x 31.8 cm
Driver Complement :One high-definition 8" long throw woofer, pressure coupled to two 8” low bass radiators
Frequency Response :14 Hz – 200 Hz
Internal Amplifier Power :1250 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :Two pairs of 5 way binding posts
High Level Outputs :Two pairs of 5 way binding posts
Subwoofer Inputs :One LFE input (for SW preout only)
Low Level Inputs :Two low level inputs: left and right low level in
Low Level Outputs :Two low level outputs: left and right low level out
High Level High Pass Crossover :Non Variable 6 dB/octave @ 80 Hz: Available only with high level inputs and outputs only
Low Level High Pass Crossover :12 dB/octave continuously variable from 40 Hz to 150 Hz. Available only with low level inputs and outputs
Low Pass Crossover% :24 dB/octave, continuously variable from 40 Hz – 150 Hz: Available only with high level inputs and outputs or low level inputs and outputs
Available Finishes :Piano-Gloss Black
Accessories :Rubber feet; Isolation spikes
Fuse :8 amp 250 volt Slo Blo (US) | 4 amp 250 volt Slo Blo (International)
Weight | Metric :42 lbs | 19.0 kg
Warranty :5 Years; 3 Years for Amplifiers |
Super-compact size
8" custom downfiring woofer
Wireless-ready!
Solid hand-finished, front-ported cabinet
Auto-sleep power saving mode
Dual line-level inputs (RCA and mini-jack)
All cables included
Excellent performance for music, movies,
and videogames
A perfect bass extension for Audioengine
powered speakers or any audio system!
Brand Name: Audioengine
Speaker Type: Subwoofer
Item Display Height: 11.3 in
Depth: 11.3 in
RMS Power Range - Speakers: 125 watts
Peak Power Handling - Speakers: 250 watts
Maximum Speaker Depth (inches): 11.3 in
|
Reviews
There are no reviews yet.