| Content |
USB wireless LAN adaptor for connecting Tyros 5 and CLP-500 Series to iOS devices
USB wireless LAN adaptor for connecting Tyros 5 and CLP-500 Series to iOS devices
Compatible Instruments (A firmware update maybe required, please contact our seervice department)
CLP-535/545/575/585/565GP (excluding CLP-525)
MOTIF XF6/7/8 (Ver.1.50 or later)
CVP701/CVP705/CVP709/CVP709GP
PSRS670/PSRS770/PSRS970
Tyros5 (included)
|
Never be without the right cable
Have you ever been in a situation where you didn't have the right cable for the job? With the iLine Mobile Music Cable Kit, you'll never be without options.
The kit is a complete collection of six high-quality audio cables (with a convenient travel case), designed to provide users of smartphones, tablets, MP3 players and laptops with the tools they need to handle virtually any signal routing and audio-cabling situation.
Think of iLine as the "Swiss Army Knife" of the cable world.
Gold record-ing
Gold is good for so many things, like completely changing the attitude of crusty old miners and crabby spouses. But it's especially suited for audio-cable termination (end) points due to its corrosion resistance properties. Plus, it just looks cool on a set of connectors.
Designed for pure audiophile sound, all iLine cables are made in Italy from high-quality components including 24K gold-plated connectors, high-purity copper conductors (you know, the "super-conductor" kind that doesn't oxidize), high-density shielding to protect against foreign sound particles, and low-capacitance insulation for transient preservation.
This combination of components gives you the best possible signal transmission for pure quality sound. The device connectors are also smartly designed to fit your smartphone case without being disconnected, and are color-coded for quick and easy identification of their functionality.
Tons of uses
The kit covers a wide range of mobile and audio applications, including hard-to-find ones like converting stereo signals to mono, extending a headphone cable (and still being able to use the built-in mic), or easily connecting your phone or laptop to DJ or home stereo gear.
Cables included in the iLine Mobile Music Cable Kit:
| 1. Mono Output Adapter
This cable converts 1/8" (3.5mm) stereo output to 1/4" (6.35mm) mono signal. Use this to send your stereo output from your device into a mono input device like a guitar amplifier or a mono-input powered speaker. Use it to connect your iRig and AmpliTube setup on your device to your guitar amplifier. It features a 3.5mm (1/8“) male connector and a 1/4" (6.35mm) mono female connector. (Use your standard 1/4" guitar or speaker cable to complete the connection.) Length: 11.8" (30cm).
| 2. Input Output Extension
Extends the range of your device output jack, including signal input and microphone capability. Use this one when you want to use your iRig, iRig MIC, iRig MIC Cast or headset with more room to move around, especially if you talk with your hands a lot. It features a TRRS Male and a TRRS female jack. Length: 23.6" (60cm).
| 3. Stereo Aux
You'll probably use this one the most. It's a simple, straightforward stereo output extender for sending the stereo signal from your device to a 3.5mm stereo input (female) jack. It features two 1/8" (3.5mm) male jacks. Length: 59" (150cm)
| | 4. Headphone Splitter
As the name implies, this one takes a single stereo pair from your device and makes two out of it. Use this on long road trips with your kids (if they like the same movie) or just to monitor new songs you've written on your iPhone. This is a very handy cable. It features one 1/8" (3.5mm) TRS stereo male plug and two 1/8" (3.5mm) TRS stereo female jacks. Length: 11.8" (30cm).
| 5. RCA Output Adapter
If you want to connect your mobile device to your home stereo receiver or DJ Mixer, this is your cable. It splits the stereo output from your device into left & right mono RCA inputs. It features a 1/8" (3.5mm) male jack and two mono male RCA jacks. Length: 59" (150cm).
| 6. Mono Output Splitter
This one is perfect for sending the signal from your device to the L/R inputs in a stereo channel on a mixer. The unique 1/4" mono female jacks let you use your standard signal cables to freely place your device on stage while running your signal to the front of house mixer. It features a 1/8" (3.5mm) male jack and two 1/4" (6.35mm) female jacks. Length: 23.6" (60cm).
|
Color Coding Rings:
| Blue:
Stereo | | Green:
Stereo w/input | | White:
Mono/Left | | Red:
Mono/Right |
Even with the color coding, there might be times when you're not sure which cable to use in a specific situation. Hey, not everyone out there is super techy. But fear not, we have a great solution: a free interactive companion app called iLine Cable Kit, available for both iOS and Android.
|
- Brand: Andowl
- Type: Micro USB
- Protocol: 3.0
- Detatchable cable: Yes
- Input: 110-240V, AC 50-60hz
- Output: Quick/smart charge 5V-3A/9V-2A/ 12V-1.5A
- Colour: Black
| ARTLIGHT PB106-0150 PROLINK CABLE JACK Male 3.5mm - JACK Female 3.5 mm - 3m | Smartphone Microphone Retractable Stand L7 for Live Streaming, Video Blogs or Online Class
Lightweight and compact size.
Easy to carry and install.
Round Base, more stable,
Steel Tube and plastic base, durable to use; Mic Stand/Microphone Stand.
Specifications:
Material: Steel + Plastic
Base Diameter: 11.5cm
Height: 22cm, Adjusted
Applicable occasions: conference rooms, schools, stage, shooting field, online singing, live streaming
- Smartphone Microphone Retractable Stand L7 for Live Streaming or Vlogs
- Lightweight and compact size
- Easy to carry and install
- Round base, stable design
- Steel Tube and plastic base, durable and easy to use
- Specifications:
- Material: Steel + Plastic
- Base Diameter: 11.5cm
- Height: 22 to 30 cm, Adjustable
- Applicable for: Conference rooms, schools, stage, shooting field, online singing, live streaming
- How to assemble:
- 1. Pull out retractable stand from the large base pole
- 2. Screw base pole into the stand.
- 3. Screw to part with ball head onto the retractable pole
- 4. Put the screw lock into the ball head.
- 5. Put the phone mount onto the ball head
- 6. Screw the lock onto the mount
|
Camera connecting cable with a standard 3.5mm mini-jack and a lockable mini-jack for the EW EK-series portable receivers Sennheiser CL1 camera receiver output cable with lockable mini-jack, CL-1 mini-jack camera input cable
For Sennheiser Evolution Wireless (EK100 G2/EK500 G2 receiver).
|
Reviews
There are no reviews yet.