| Content |
Zero88 Rack 6-Schuko 6 Channels Digital Switcher
Cost effective 19" dimmer
The Rack 6 is an economical choice for those wanting a rack mount DMX dimmer. Housed in a compact 2U unit the Rack 6 offers users six 10 amp circuits of dimming control. Using the latest electronic and electrical designs the Rack 6 offers real value for money. All operator controls are available through a simple, intuitive interface.
The Rack 6 is not limited in features however. Offering 12 memories, a preheat per channel, three dimmer curves and Chilli-Net compatibility the Rack 6 offers users sophistication not usually found in a dimmer in this price range.
With a range of socket options, CE certification and a three year warranty the Rack 6 is the ideal choice for users looking for a cost effective touring dimmer.
The Switch 6 is physically identical to the Rack 6, except that each channel is controlled by a heavy duty relay, instead of a dimming circuit. Ideal for switching non-dimmable loads, the Switch 6 is available with the same socket options as the Rack 6.
| Features |
- 3 dimmer curves (normal, linear, switch)
- 12 Memories
- Preheat per channel
- International socket options
- 6 x 10 Amps
- MCB per channel
- Advanced heatsink and fan cooling
- DMX addressing via user interface
|
- 19"
- Built in termination circuit for DMX
- ChilliNet enabled
- RDM hardware ready
- Dimensions - 88mm x 483mm x 360mm
- Weight - 8.0kg
| |
This is a 16 A three-phase power splitter with 1 PCE 3x 16A/400V input and 6 Schuko 16A output.
Each phase output(2 Schuko, 16A) is protected by a 16A circuit breaker and can be read out by a
4-digit voltmeter as well as 4-digit ammeter. Additionally, a protected Schuko is provided for plugging
in power.
| Adam Hall Cables 87471
19" Power Strip 1U 8-way with switch
Mains Distribution Unit 19"/1 U
- Illuminated 2-pole switch on the front panel
- 8 mains outlets on the rear panel
- Black aluminium housing
- 54 mm deep
- 19 "angle can be mounted in four positions
Product type
19" rack mains socket strips
Number of outlets (Earthing contact / IEC 7/4)
8, Rotated 45°
Cable connector
angled, Earthing contact (CEE 7/7)
Cabinet material
Aluminium, Plastic
Other features
Illuminated on / off switch, Mounting brackets can be used in 4 positions
| ESD 5K Automatic Voltage Regulator
Automatic tension regulator. For a tension between 120 V. and 250 V. Maintains the output to 220 V.
Max. load 5.000 W. Input and output connections through bananas. Schuko base output auxiliar regulated.
(max. 2.500 W.). Digital display with information of the input tension, output tension, current and protection.
The protection works by overload or an excesive temperature emitting a sound of advise and disconnecting
the load. It has in its rear panel an auxiliar shuko plug.
Dimensions: 230 x 220 x 370 mm. Weight: 16, 3 kgs. | Eurolite SB-1100 Practical 32 A distributor in 19" housing
Practical 32 A distributor in 19" housing
Specially designed for larger distribution needs
3 U necessary for installation
32 A three phase current input via 1.5 meter long 5 x 6 mm?² power cable and plug
32 A three phase current output via mounted plug secured on the back panel by a fault current circuit breaker
The entire distributor is secured via 30 mA fault current circuit breaker
2 mounted CEKON sockets with 16 A on the front panel, secured via 3 x 16 A fuse blocks
Control lamps indicate each phase
6 safety sockets on the housing back (2 per phase)
Each pair of safety sockets feature fuse protection via 16 A automatic circuit breakers
With earthing screw in order to ground a rigg if necessary
Power supply: 380-400 V AC, 50 Hz ~
Max. output/channel (safety socket): 3680 W
Max. current/channel (safety socket): 16 A
Max. output/phase: 7360 W
Max. current/phase: 32 A
Height: 3 U
Dimensions (LxWxH): 482 x 295 x 132 mm
Weight: 6.9 kg |
1 Multiconnector input 8 CEE outputs |
Reviews
There are no reviews yet.