Content | Uses a system of interchangeable input capsules that can be swapped out as easily as the lens of a camera
Includes detachable X/Y capsule (XYH-5) with extended signal capacity and shockmounted mics for reduced handling noise
Compatible with all Zoom input capsules
Four-track simultaneous recording
Large backlit LCD display
Records directly to SD and SDHC cards up to 32GB
Up to 24-bit/96kHz audio in BWF-compliant WAV or a variety of MP3 formats
Two mic/line inputs with XLR/TRS combo connectors, each with selectable phantom power and -20dB pad
Analog-style gain controls for each input
Protective "roll-bar" type covers prevent accidental movement of gain controls
Plug-in power (2.5 volts)
Built-in effects, including low-cut filtering, compression and limiting
Chromatic tuner and metronome
Auto-record, Pre-record and Backup-record functions mean that you'll never miss that perfect take
MS decoding
Multitrack to stereo internal mixdown
Normalize, Divide and Trim editing
Voice memo and up to 99 marks per recording
A/B loop playback
Variable playback speed and variable pitch without affecting playback speed
Multichannel and stereo USB audio interface for PC/Mac/iPad with loop back function
Mountable to DSLR or camcorder with optional HS-01 Hot Shoe Mount adapter
Uses two standard AA alkaline or NiMH rechargeable batteries
Over 15 hours of operation with alkaline batteries
GENERAL
Recording media:
SD card: 16MB to 2GB , SDHC card: 4GB to 32GB
Display:
Backlit LCD (128 x 64 pixels)
INPUTS
INPUTS L/R [XYH-5 X/Y mic]:
Mic type: Unidirectional
Sensitivity: -45 dB, 1 kHz at 1 Pa
Input gain: -∞ to 52 dB
Max sound pressure input: 140 dB SPL
MIC/LINE IN :
Connector: 1/8" stereo mini jack
Input gain: - ∞ to 52 dB
Input impedance: 2 k Ω or more
Plug-in power: 2.5V supported
Backup recording: -12dB lower than set L/R input gain
INPUTS 1/2:
Connectors: XLR / TRS combo jacks
(XLR: Pin 2 hot / TRS: Tip hot)
Input gain (PAD OFF): -∞ to 55.0 dB
Input gain (PAD ON): -∞ to 35.0 dB
Input impedance: 1.8 k Ω or more
Max input level: +22 dBu (PAD ON)
Phantom power: +12V /+24V /+48V
Equivalent Input Noise (EIN): -120 dBu or less
OUTPUTS
LINE OUT :
Connector: 1/8" stereo mini jack
Rated output level: -10 dBm
Output load impedance: 10k Ω or more
PHONE OUT :
Connector: 1/8" stereo mini jack
Output Level: 20 W +20 W into 32 Ω load
Built-in speaker:
400mw 8 Ω mono
RECORDING FORMATS
STEREO MODE:
WAV (BWF-compliant)
Sampling frequency: 44.1/48/96 kHz
Bit rate: 16/24 (Stereo)
Maximum simultaneous recording tracks: 2
MP3
Sampling frequency: 44.1kHz
Bit rate: 48/56/64/80/96/112/32/160/192/224/256/320kbps
MULTITRACK MODE:
WAV (BWF-compliant)
Sampling frequency: 44.1/48 kHz
Bit rate: 16/24 (Mono/Stereo)
Maximum simultaneous recording tracks: 6 (L/R + INPUT 1/2 + L/R backup)
USB
Mass Storage Class operation:
Class: USB 2.0 High Speed
Audio Interface operation: Multitrack mode:
Class: USB 2.0 High Speed
Sampling frequency: 44.1/48kHz
Bit rate: 16/24 bit
Inputs / Outputs: 4 / 2
Audio Interface operation: Stereo mode:
Class: USB 2.0 Full Speed
Sampling frequency: 44.1/48kHz
Bit rate: 16 bit
Inputs / Outputs: 2 / 2
USB bus powered operation possible
(iPad operation supported in Stereo mode only)
POWER REQUIREMENTS
AA size (LR6) battery x 2
AC adapter: AD-17 (DC5V/1A/USB-type) (optional)
USB bus power |
* Instrument trainer / recorder * 1/4" guitar/bass input * Guitar/bass effects including amp modelling, delay, reverb, chorus and more * Records 44.1kHz/16-bit WAV files * Playback 16 or 24-bit WAV files or MP3 files * SD/SDHC card media slot with included 2GB card * Overdub recording allows sound-on-sound build up of an arrangement * Loop playback using dedicated buttons * Variable Speed Audition speeds up or slows down playback without changing the pitch * Chromatic Tuner and Metronome * USB 2.0 jack for high-speed music transfer * Dedicated keys and large LCD display for easy operation * Angled desktop design * Includes 2GB SD card, AA batteries, USB cable
|
Why are 4-channels of audio better than 2-channels?
-
Capture more ambient sound at any shoot for an overall more convincing soundscape.
-
Place mics on each participant in conferences, panels, reporters, etc.
-
Redundancy or backup in case of camera mic noise or drop out.
-
Simplify wedding shoots with a mic on the bride, groom, officiator and a mic for ambient sound.
-
Video editing environments now support multi-channel audio as standard.
-
Main Features
The R-4 brings you a new generation of portable recording. Enjoy superb sound quality. Use the 40GB hard disk drive for extended recording. Record up to four channels at once. Edit waveforms on the recorder itself. All this plus a compact size and light weight that assure outstanding mobility in the field. The Edirol R-4. Gear up for the new generation of portable recording.
Extended Recording with 40GB Hard Disk Drive
Equipped with a 40GB hard disk drive, the R-4 can record up to 17 hours at maximum sound quality or up to 58 hours at CD quality.
Superior 24-bit/96-kHz Linear Recording
Totally uncompressed recording assures outstanding sound quality. Choose 16-bit or 24-bit quantization and a sampling rate of 44.1 kHz, 48 kHz, or 96 kHz. Save data as WAV files.
Simultaneous 4-Channel Recording
The 4 XLR/Phone combo jacks come with switchable phantom power and give you a choice of MONO, STEREO, STEREO X2, or 4CH recording. Digital input/output is also provided.
Four-channel recording gives you exceptional flexibility. For example, you can use mics to capture the ambience of a performance hall while using line input to record the performance itself. Or you can record at several different level settings simultaneously.
-
Five High-Quality Effects
The R-4 lets you tailor the sound during both recording and playback.
-
L Terminal for Linking a Digital Video Camera
The R-4's L terminal lets you connect a similarly equipped digital video camera to synchronize the camera start/stop while R-4 is recording. Counting the camera's two channels, this configuration gives you a total of six audio channels — a wealth of audio data to get creative with.
Waveform Editing Using Only the R-4
The R-4 is all you need to edit waveforms. Just watch the waveform on the LCD as you edit. Scrubbing playback with the shuttle dial lets you set the edit points precisely by sound.
Index Any Point Instantly
Press the mark button anytime during recording or playback to mark that point for easy, instant indexing later. With the A-B repeat function you can set two points and repeatedly play back the material between them.
Easy Playback with the Jog Dial
Use the jog dial to fast-forward or rewind at any of seven speed levels.
Built-In Stereo Speakers
The R-4's built-in speakers make it easy to monitor recorded sound without headphones.
-
L Terminal for Linking a Digital Video Camera
The R-4's L terminal lets you connect a similarly equipped digital video camera to synchronize the camera start/stop while R-4 is recording. Counting the camera's two channels, this configuration gives you a total of six audio channels — a wealth of audio data to get creative with.
Waveform Editing Using Only the R-4
The R-4 is all you need to edit waveforms. Just watch the waveform on the LCD as you edit. Scrubbing playback with the shuttle dial lets you set the edit points precisely by sound.
Index Any Point Instantly
Press the mark button anytime during recording or playback to mark that point for easy, instant indexing later. With the A-B repeat function you can set two points and repeatedly play back the material between them.
Easy Playback with the Jog Dial
Use the jog dial to fast-forward or rewind at any of seven speed levels.
Built-In Stereo Speakers
The R-4's built-in speakers make it easy to monitor recorded sound without headphones.
| TASCAM's award winning DR-60D is the new audio recording solution for on-set filmmakers and videographers using DSLR's. For years, filmmakersProSound Network Best of Show have been trying different methods for recording audio, using bulky recorders designed for music and trying to transform the inferior audio technology built-into DSLR's. Now TASCAM has designed an answer that pros and amateurs alike have been waiting for.
The DR-60D is a brand new 4-track solid-state recorder utilizing TASCAM's decades of experience. The recorder utilizes high-grade HDDA pre-amps, legendary AD converters, and a durable but lightweight structure and shape. This device will fit snuggly under any camera or into any rig, and record up to 96kHz/24-bit high quality audio straight to SD/SDHC media. Filmmakers have at their disposal two 1/4“-XLR Locking Combo MIC/LINE Inputs, 3.5mm Stereo MIC Input, Camera In, Camera Out, Line Out and Headphone Out. Both 1/4“-XLR Combo Inputs supply +48V Phantom Power and the 3.5mm Input supplies Plug-In Power for microphones requiring a bias voltage.
The DR-60D is incredibly easy to use, employing TASCAM's very popular user interface and external controls for every major operation. The body structure, soft-touch keys and dials are designed specifically to help eliminate handling noise. The multiple record modes include, 4-Channel Record, Auto Record and TASCAM's Dual Record "Safety Track" Mode make the DR-60D one of the most versatile recorders on the market.
- Record to SD/SDHC card (Up to 32GB)
- Simultaneously record up to 4 tracks
- Record Mode:MONO, STEREO, DUAL MONO, DUAL STEREO, 4-CHANNEL
- Recording format:44.1/48/96kHz 16/24bit (WAV/BWF)
- TASCAM original HDDA microphone preamps
- Recording levels can be adjusted independently for the 1/L, 2/R and 3-4 inputs
- Two XLR/TRS inputs support +4dBu line level input and phantom power (24 or 48VDC on XLRF)
- Plug-in power and high-output mic input supported on inputs 3-4
- CAMERA OUT connector for output from the DR-60D's mixer (adjustable gain)
- CAMERA IN connector for sound monitoring from the camera
- Independent adjustable LINE OUT and HEADPHONE jacks for high-quality sound output
- 50mW/ch headphone output
- Tripod mounting socket (bottom) and DSLR mounting screw attachment (top)
- Handles protect the screen and can be used to attach a shoulder strap
- Soft-Touch Rubber Keys for silent operation
- HOLD switch to prevent accidental operation
- QUICK button feature for easy access to various functions
- 128x64 pixel LCD with backlight
- USB 2.0 connection for high-speed transferring of files
- Mini USB cable included
- Operates on 4-AA batteries, an AC adapter (sold separately) or USB bus power
- Can extend battery life with BP-6AA battery pack (sold separately)
- Dedicated remote control jack for the wired RC-10 remote control or RC-3F footswitch (both sold separately)
- Internal mixer: PAN and LEVEL controls
- Low cut filter(40/80/120Hz)
- Limiter (1/L and 2/R can be selected for link-operation)
- Delay function for microphone distance adjustment (up to 150ms)
- M-S decode function
- Slate tone generator (AUTO/MANUAL)
- Selectable duration of slate tone from four positions (0.5/1/2/3 sec, when auto-generated)
- Selectable slate tone generation. 3 positions: OFF/HEAD/HEAD+TAIL, when auto-generated
- File name format can be set to use a user-defined word or date
- Dual-recording function allows two files to be recorded simultaneously at different levels
- Auto-record function can automatically start and stop recording at set level
- Pre-recording function allows the unit to record a 2 second sound buffer before recording is activated
- Self-timer function for solo recording
- New file starts recording automatically without interruption when maximum file size is reached
- Track incrementing function allows a recording to be split by creating a new file when desired
- Jump back and play function
- Equalizer function for playback, and level alignment function to enhance the perceived overall sound pressure
- Resume function to memorize the playback position before the unit is turned off
- MARK function up to 99 points per audio track
- DIVIDE function
SPECIFICATIONS
Recording media |
SD card(64MB to 2GB), SDHC card(4GB to 32GB) |
Recording format |
|
WAV |
44.1/48/96kHz, 16/24bit |
BWF |
44.1/48/96kHz, 16/24bit |
Number of channels |
4channel (stereo x2) |
Analog audio input |
|
1/L, 2/R connectors |
|
Connector |
XLR-3-31 (1:GND, 2:HOT, 3:COLD)/6.3mm(1/4“)TRS standard jack |
Set to "MIC / MIC+PHANTOM“ |
|
Input impedance |
2k ohms |
Phantom power |
48V +/-4V(10mA/CH) / 24V +/-4V(10mA/CH) |
Maximum input level |
0dBu |
Minimum input level |
-72dBu |
MIC input gain |
TRIM MAX |
LOW |
+11dB |
MID |
+36dB |
HIGH |
+52dB |
Set to "LINE“ |
|
Input impedance |
10k ohms or more |
Standard input level |
+4dBu |
Maximum input level |
+24dBu |
3-4 connector |
|
Connector |
3.5mm (1/8“) stereo mini jack (this connector can be supplied plug-in power) |
Input impedance |
10k ohms |
Maximum input level |
+10dBV |
Minimum input level |
-50dBV |
MIC input gain |
TRIM MAX |
LOW |
+3dB |
HIGH |
+26dB |
CAMERA IN connector |
|
Connector |
3.5mm (1/8“) stereo mini jack |
Input impedance |
10k ohms |
Standard input level |
-10dBV |
Maximum input level |
+6dBV |
Analog audio output |
|
CAMERA OUT connector |
|
Connector |
3.5mm (1/8“) stereo mini jack |
Output impedance |
200 ohms |
Standard output level |
-50dBV |
Maximum output level |
-30dBV |
LINE OUT connector |
|
Connector |
3.5mm (1/8“) stereo mini jack |
Output impedance |
200 ohms |
Standard output level |
-10dBV |
Maximum output level |
+10dBV |
PHONES connector |
|
Connector |
3.5mm (1/8“) stereo mini jack |
Maximum output level |
50mW + 50mW |
USB |
|
Connector |
Mini-B type |
Format |
USB2.0 HIGH SPEED mass storage class |
REMOTE |
|
Connector |
2.5mm TRS jack |
Power |
Four AA batteries(Alkaline or NI-MH),
USB bus power,
Dedicated AC adapter(TASCAM PS-P515U, sold separately),
Dedicated external battery pack(TASCAM BP-6AA, sold separately) |
Power consumption |
5.4W |
Continuous operation time |
2ch WAV, 44.1kHz, 16bit rec |
DR-60D |
|
Alkaline batteries (EVOLTA) |
About 2:30 min (Phantom on)
About 4:30 min (Phantom off) |
NI-MH batteries (eneloop) |
About 3:15 min (Phantom on)
About 5:00 min (Phantom off) |
NI-MH batteries (eneloop pro) |
About 3:45 min (Phantom on)
About 6:00 min (Phantom off) |
DR-60D+BP-6AA |
|
Alkaline batteries (EVOLTA) |
About 5:30 min (Phantom on)
About 10:30 min (Phantom off) |
NI-MH batteries (eneloop) |
About 7:30 min (Phantom on)
About 12:00 min (Phantom off) |
NI-MH batteries (eneloop pro) |
About 9:30 min (Phantom on)
About 14:30 min (Phantom off) |
Dimensions |
133(W)×93.2(H)×78(D)mm (with the top adapter attached) |
Weight |
510g (not including batteries) |
Operating temperature |
0˚C to 40˚C |
Standard accessories |
USB cable, warranty card, Owner's manual |
Computer compatibility |
Windows |
OS |
Windows XP, Windows Vista, Windows 7, Windows 8 |
CPU |
Pentium 300MHz or more |
RAM |
128MB or more |
USB |
recommended: USB2.0 |
Macintosh |
OS |
Mac OS X Jaguar (V10.2), Mac OS X Panther (V10.3), Mac OS X Tiger (V10.4),
Mac OS X Leopard (V10.5), Mac OS X Snow Leopard(V10.6.8), OS X Lion(V10.7),
OS X Mountain Lion(V10.8) |
CPU |
Power PC, iMac, G3, G4 266MHz or more |
|
64MB or more |
USB |
recommended: USB2.0 |
Audio performance |
Frequency response |
20-20kHz +0.5/-2dB(LINE IN or MIC IN to LINE OUT, Fs44.1k/48kHz, JEITA)
20-40kHz +0.5/-3dB(LINE IN or MIC IN to LINE OUT, Fs96kHz, JEITA) |
Distortion |
0.02% or less(LINE IN or MIC IN to LINE OUT Fs44.1k/48k/96kHz, JEITA) |
S/N ratio |
92dB or more(LINE IN or MIC IN to LINE OUT Fs44.1k/48k/96kHz, JEITA) |
Equivalent input noise |
-120dBu or more |
Recording duration
The table below shows the maximum recording time on SD/SDHC cards of different capacities for different file formats for recording.
File format(recording setting) |
SD/SDHC card capacity(hours:mintes) |
1GB |
2GB |
4GB |
8GB |
WAV/BWF 16bit(STEREO) |
44.1kHz |
1:41 |
3:22 |
6:44 |
13:28 |
48kHz |
1:33 |
3:06 |
6:12 |
12:24 |
96kHz |
0:46 |
1:33 |
3:06 |
6:12 |
WAV/BWF 24bit(STEREO) |
44.1kHz |
1:07 |
2:15 |
4:30 |
9:00 |
48kHz |
1:02 |
2:04 |
4:08 |
8:16 |
96kHz |
0:31 |
1:02 |
2:04 |
4:08 |
- The recording times shown above are estimates. They might differ depending on the SD/SDHC card in use.
- The recording times shown above are not continuous recording times, but rather they are the total possible recording times for the SD/SDHC card.
- If recorded in mono in WAV files, the maximum recording time will be double the figures above.
- For dual and 4-channel recording in WAV/BWF format, the recording times are about half those shown above.
| Recording Media SD/SDHC card (up to 32GB)
Built-in Mic MS stereo & 90-degree XY stereo
Maximum Sound Pressure Level 120dB SPL
Recording Format 《STEREO MODE》
PCM (Quantization : 16/24bit, Sampling Frequency : 44.1/48/96kHz),
MP3 (Bit Rate : 48 to 320kbps, Sampling Frequency : 44.1kHz)
《4CH MODE》
PCM (Quantization: 16/24bit, Sampling Frequency: 44.1/48kHz)
A/D Conversion 24bit, 128times oversampling
D/A Conversion 24bit, 128times oversampling
Signal Processing 32bit
Functions Lo-cut Filter, Compressor/Limiter, Auto Gain, Pre-Rec, Auto-Rec, Tuner,Metronome, Variable Speed Playback, Key Control, A-B Repeat,File Dividing, Normalize, MP3 Post-Encode, Marker, Surround Mixer
Display 128 x 64 pixel, backlit LCD
Input Gain 0 to +39dB
Mic / Line Input 1/8" stereo phone jack (Plug-in power supported)
Input impedance 2kΩ (Input level: 0 to -39dBm)
Phones / Line Output 1/8" stereo phone jack
Rated Output Level -10dBm
Output Load Impedance 10kΩ or more
Phones Output Level 20mW + 20mW into 32Ω load
Built-in Speaker 400mW 8Ω
USB Mini-B type, Mass Storage Class operation (USB2.0 High Speed compatible),
Audio Interface operation (16bit, 44.1kHz/48kHz)
Power Requirements AA/LR6 battery x 2, or AC adapter AD-17 (DC5V/1A/center positive)
Battery Life 20 hours (16bit/44.1kHz WAV recording)
Dimensions 67.6 (W) x 113.8 (D) x 42.7 (H) mm
Weight 130g (without batteries) |
Features at a glance - Supports Sennheiser wireless system mics and transmitters (DR-10CS)
- Supports Shure wireless system mics and transmitters (DR-10CH, DR-10CS with optional AK-DR10CH panel)
- Supports Sony/RAMSA wireless system mics and transmitters (DR-10CS/DR-10CH with optional AK-DR10CR panel)
Note: The Sony/RAMSA panel has a sliding switch to allow proper wiring configuration - 48kHz/24-bit linear PCM mono recording
- WAV files (compatible with BWF format)
- Media: microSD/SDHC cards (supports 32GB capacities)
- Sliding record switch and hold function to prevent misoperation during recording
- Dual recording function
- automatic file closing function to prevent the loss of already recorded data
- High/Mid/Low recording level settings
- Low-cut filter
- Limiter
- Automatic level function
- With a built-in clock function, supports BWF files that can have time information added - convenient for editing and searching
- Time track incrementing function can create new files at regular intervals (every 15 minutes) during recording
- Playback function allows recorded data to be checked immediately
- Headphone output
- Easy-to-read organic EL display
- micro USB B port enables easy data exchange with computers
- Records at least 10 hours on a single AAA battery * using alkaline batteries (EVOLTA)
- Unit settings can be created and transferred as a computer text file
- Settings can be transferred between DR-10C units using the infrared transmission function
- Firmware can be updated using a microSD card
- Belt clip included
- Silicon band that can be used to attach the unit to a transmitter included
- Custom case for storing the unit and accessories included
- RoHS-compliant product
|
Reviews
There are no reviews yet.