Content | Uses a system of interchangeable input capsules that can be swapped out as easily as the lens of a camera
Includes detachable X/Y capsule (XYH-5) with extended signal capacity and shockmounted mics for reduced handling noise
Compatible with all Zoom input capsules
Four-track simultaneous recording
Large backlit LCD display
Records directly to SD and SDHC cards up to 32GB
Up to 24-bit/96kHz audio in BWF-compliant WAV or a variety of MP3 formats
Two mic/line inputs with XLR/TRS combo connectors, each with selectable phantom power and -20dB pad
Analog-style gain controls for each input
Protective "roll-bar" type covers prevent accidental movement of gain controls
Plug-in power (2.5 volts)
Built-in effects, including low-cut filtering, compression and limiting
Chromatic tuner and metronome
Auto-record, Pre-record and Backup-record functions mean that you'll never miss that perfect take
MS decoding
Multitrack to stereo internal mixdown
Normalize, Divide and Trim editing
Voice memo and up to 99 marks per recording
A/B loop playback
Variable playback speed and variable pitch without affecting playback speed
Multichannel and stereo USB audio interface for PC/Mac/iPad with loop back function
Mountable to DSLR or camcorder with optional HS-01 Hot Shoe Mount adapter
Uses two standard AA alkaline or NiMH rechargeable batteries
Over 15 hours of operation with alkaline batteries
GENERAL
Recording media:
SD card: 16MB to 2GB , SDHC card: 4GB to 32GB
Display:
Backlit LCD (128 x 64 pixels)
INPUTS
INPUTS L/R [XYH-5 X/Y mic]:
Mic type: Unidirectional
Sensitivity: -45 dB, 1 kHz at 1 Pa
Input gain: -∞ to 52 dB
Max sound pressure input: 140 dB SPL
MIC/LINE IN :
Connector: 1/8" stereo mini jack
Input gain: - ∞ to 52 dB
Input impedance: 2 k Ω or more
Plug-in power: 2.5V supported
Backup recording: -12dB lower than set L/R input gain
INPUTS 1/2:
Connectors: XLR / TRS combo jacks
(XLR: Pin 2 hot / TRS: Tip hot)
Input gain (PAD OFF): -∞ to 55.0 dB
Input gain (PAD ON): -∞ to 35.0 dB
Input impedance: 1.8 k Ω or more
Max input level: +22 dBu (PAD ON)
Phantom power: +12V /+24V /+48V
Equivalent Input Noise (EIN): -120 dBu or less
OUTPUTS
LINE OUT :
Connector: 1/8" stereo mini jack
Rated output level: -10 dBm
Output load impedance: 10k Ω or more
PHONE OUT :
Connector: 1/8" stereo mini jack
Output Level: 20 W +20 W into 32 Ω load
Built-in speaker:
400mw 8 Ω mono
RECORDING FORMATS
STEREO MODE:
WAV (BWF-compliant)
Sampling frequency: 44.1/48/96 kHz
Bit rate: 16/24 (Stereo)
Maximum simultaneous recording tracks: 2
MP3
Sampling frequency: 44.1kHz
Bit rate: 48/56/64/80/96/112/32/160/192/224/256/320kbps
MULTITRACK MODE:
WAV (BWF-compliant)
Sampling frequency: 44.1/48 kHz
Bit rate: 16/24 (Mono/Stereo)
Maximum simultaneous recording tracks: 6 (L/R + INPUT 1/2 + L/R backup)
USB
Mass Storage Class operation:
Class: USB 2.0 High Speed
Audio Interface operation: Multitrack mode:
Class: USB 2.0 High Speed
Sampling frequency: 44.1/48kHz
Bit rate: 16/24 bit
Inputs / Outputs: 4 / 2
Audio Interface operation: Stereo mode:
Class: USB 2.0 Full Speed
Sampling frequency: 44.1/48kHz
Bit rate: 16 bit
Inputs / Outputs: 2 / 2
USB bus powered operation possible
(iPad operation supported in Stereo mode only)
POWER REQUIREMENTS
AA size (LR6) battery x 2
AC adapter: AD-17 (DC5V/1A/USB-type) (optional)
USB bus power |
Features at a glance - Supports Sennheiser wireless system mics and transmitters (DR-10CS)
- Supports Shure wireless system mics and transmitters (DR-10CH, DR-10CS with optional AK-DR10CH panel)
- Supports Sony/RAMSA wireless system mics and transmitters (DR-10CS/DR-10CH with optional AK-DR10CR panel)
Note: The Sony/RAMSA panel has a sliding switch to allow proper wiring configuration - 48kHz/24-bit linear PCM mono recording
- WAV files (compatible with BWF format)
- Media: microSD/SDHC cards (supports 32GB capacities)
- Sliding record switch and hold function to prevent misoperation during recording
- Dual recording function
- automatic file closing function to prevent the loss of already recorded data
- High/Mid/Low recording level settings
- Low-cut filter
- Limiter
- Automatic level function
- With a built-in clock function, supports BWF files that can have time information added - convenient for editing and searching
- Time track incrementing function can create new files at regular intervals (every 15 minutes) during recording
- Playback function allows recorded data to be checked immediately
- Headphone output
- Easy-to-read organic EL display
- micro USB B port enables easy data exchange with computers
- Records at least 10 hours on a single AAA battery * using alkaline batteries (EVOLTA)
- Unit settings can be created and transferred as a computer text file
- Settings can be transferred between DR-10C units using the infrared transmission function
- Firmware can be updated using a microSD card
- Belt clip included
- Silicon band that can be used to attach the unit to a transmitter included
- Custom case for storing the unit and accessories included
- RoHS-compliant product
| Un-beatable Audio Performance Comes Home to Roost - Meet the Korg MR-2000S!
Korg captured the world's attention with their MR series of DSD mobile recorders and studio tools. After consulting with top recording and mastering professionals, Korg has now created the Korg MR-2000S Studio Recorder; a 2-track mixdown designed from the ground up to bring that same DSD sonic performance home for use in any studio environment.
A DSD and Mastering Recorder Born to Run
In keeping with the MR Series studio recorder heritage of portability, the MR-2000S 1- bit recorder adds a number of new features to meet the requirements of the most demanding studio, yet retains a sleek, single rack-space profile. This compact format is also ideal for any live recording rig; or for grabbing that "off-the-board" live recording night after night - as well as shuttling your recordings from venue to studio and back again. So whether you want to capture that once-in-a-lifetime performance with impeccable detail, or need to transfer those priceless recordings from session to session, the MR-2000S high-resolution audio recorder is ready to roll.
SPECIFICATIONS:
Main Sections
Recorder section
Number of tracks: 2 tracks, 2 tracks simultaneous playback/2 tracks simultaneous recording
Recording formats
-PCM audio format: BWF (extension .wav) 44.1 kHz @ 16/24 bit, 48 kHz @ 16/24 bit, 88.2 kHz @ 24 bit, 96 kHz @ 24 bit,176.4 kHz @ 24 bit, 192 kHz @ 24 bit
-1-bit audio format: 2.8 MHz @ 1-bit, 5.6 MHz @ 1-bit,DSDIFF format (extension .dff), DSF (extension .dsf),WSD (extension .wsd)
-mp3 audio format(playback only): 44.1kHz/32kbps - 320kbps
Recording
Maximum approximately: 120 hours at 44.1 kHz/16 bit, 14.5 hours at 5.6 MHz/1- bit (for 80 Gbyte hard disk), Maximum continuous recording 6 hours
Number: Recognizes a maximum of projects four hundred projects of each format
Mark points: 100 points per project *No mark names
USB functionality: Connect to computer via USB 2.0, usable as FAT32 USB external drive
Project editing: Rename, Delete, Protect
General
Display: 160 x 104 pixel, LCD with backlight
Level meter: -54dBFS – 0dBFS (PC audio); -54dBSACD – +3dBSACD (1-Bit audio); L and R each provide 21/23-step LED + peak LED
Power supply: AC100 –240 V
Power consumption: 20 W
Dimensions/Weight: 18.9“(W) x 8.6“(D) x 1.7“(H):Including protrusions/6.17 lbs
Main Specifications
Frequency response: 10 Hz ... 20 kHz ± 1 dB@ Fs 44.1 kHz / 48 kHz, 10 Hz ... 40 kHz ± 1 dB@ Fs 88.2 kHz/96 kHz/176.4 kHz/ 192 kHz, 10 Hz ... 100 kHz (1-bit)
S/N: 103 dB (typical) @ IHF-A
THD+N: 0.005% (typical), 20 Hz ... 20 kHz
A/D conversion: 2.8224 MHz/5.6448 MHz(1-bit), 24bit (PCM)
D/A conversion: 2.8224 MHz/5.6448 MHz(1-bit), 24bit (PCM)
Line In L/R
XLR
-Connector: XLR-3-31 type (balanced)
-Input impedance: 22 k Ohms
-Nominal level: + 4 dBu (REC LEVEL=0dB)
-Maximum level: + 24 dBu
RCA
-Connector: RCA (Unbalanced)
-Input impedance: 50k Ohms
-Nominal level (– 12 dBFS – 12 dB-SACD):
–6 dBV (REC LEVEL = 0 dB)
-Maximum level: + 10 dBV
Line Out L/R
XLR
-Connector: XLR-3-32 type (balanced)
-Load impedance: 600 Ohms or greater
-Nominal level: – 4dBu
-Maximum level (0dBFS 0dB-SACD):
– 16 dBu (Nominal level= –12dBFS),
– 18 dBu (Nominal level= –14dBFS),
– 20 dBu (Nominal level= –16dBFS),
– 22 dBu (Nominal level= –18dBFS),
– 24 dBu (Nominal level= –20dBFS)
RCA
-Connector: RCA (Unbalanced)
-Load impedance: 47 k Ohms or greater/
-Nominal level (– 12 dBFS – 12 dB-SACD):
– 6 dBV (REC LEVEL=0dB)
-Maximum level (0 dBFS 0 dB-SACD): + 6dBV
Phones
-Connector: 1/4" stereo phone jack
-Load impedance: 16 Ohms or greater
-Maximum level: 170 mW + 170 mW @ 32 ohms
S/P Dif In/Out (coaxial)
-Connector: RCA pin
-Format: IEC60958
Word Clock In/Out
-Connector: BNC receptacle, 75 Ohms
USB
-Connector: Type B
-Format: USB 2.0 compliant,
-USB mass storage class
-Supported operating systems: Windows 2000,or later Mac OS X 10.3.9 or later
Included Items
AC power cable, Install CD (“AudioGate" audio file conversion application)
AudioGate ver,1.5 Operating Requirements
Windows
-Supported operating systems: Microsoft Windows XP Home Edition/Professional Edition Service Pack 1 or later, Microsoft Windows Vista
-Supported computers:
CPU: Intel Pentium III /1 GHz or better
RAM: 256 MB or more
A USB port that meets the operating requirements of Microsoft Windows XP/Vista
Macintosh
-Supported operating system: Mac OS X 10.3.9 or later
-Supported computers:
CPU: Apple G4/800 MHz or better, Intel Mac is supported
RAM: 256 MB or more
A USB port that meets the operating requirements of Mac OS X
Demo Project
All Most Blues
The Wind and the Wheat performed by Phil Keaggy
copyright Phil Keaggy 2006
http://www.philkeaggy.com/
*This product comes installed with the "ISC-MP3 BF532 d Korg" MP3 decoder which was developed by The Institute of Super Compression Technologies, Inc. (ISCT), Japan.
*”DSD” is a registered trademark.
*Logos, product names, and company names are their trademarks or registered trademarks.
Specifications subject to change without notice |
* Instrument trainer / recorder * 1/4" guitar/bass input * Guitar/bass effects including amp modelling, delay, reverb, chorus and more * Records 44.1kHz/16-bit WAV files * Playback 16 or 24-bit WAV files or MP3 files * SD/SDHC card media slot with included 2GB card * Overdub recording allows sound-on-sound build up of an arrangement * Loop playback using dedicated buttons * Variable Speed Audition speeds up or slows down playback without changing the pitch * Chromatic Tuner and Metronome * USB 2.0 jack for high-speed music transfer * Dedicated keys and large LCD display for easy operation * Angled desktop design * Includes 2GB SD card, AA batteries, USB cable
|
The ultimate record-anywhere multitrack.
Capture inspiration whenever and wherever you are.
The new MR-8 Mk II is the easiest to use digital multitrack ever. If you can operate a tape recorder, you'll be recording and multitracking within minutes of opening the box.
By putting all the major controls and functions right there on the top panel instead of buried in a confusing menu system, the MR-8 Mk II, unlike some other recorders, actually aids you in capturing your musical ideas. In addition there's great sounding built-in digital effects, guitar amp and mic simulators, handy mix-down effects, plus the ability to hook up to a PC for data editing, and backing up your songs.
You create. Fostex records.
New for the Mk II is the USB host feature which allows for the easy connection of an 'off-the-shelf' CD-R burner via USB. Making CD masters has never been more simple.
Recording time
Recording time in normal mode (16bit/44.1kHz) is approx. 25 track-minutes on the supplied 128MB CF card and 50 track-minutes on a 256MB card. Extended mode (16bit/22.05kHz) doubles the recording time. Note that recording time varies depending on recorded source, punch in/out, undo/redo status, etc.
Features
8 tracks of recording and playback using CompactFlash cards
2 track simultaneous recording
Superb in-built digital effects inc Mic and Amp simulations
USB Host function for CD burning with 'off-the-shelf' CD burner
2 mic inputs with +48V Phantom Power
Details
8-track recording onto CompactFlash Card.
High quality sound recording and playback with uncompressed linear 16-bit/44.1 kHz digital audio (normal mode) with 2 track simultaneous recording and 8 track playback.
LP Mode (16-bit/22.05 kHz) doubles the recording time.
Physical knobs and buttons for intuitive operations. A new dial knob for menu selection.
Newly added +48V Phantom Power on all two Mic Inputs for wider choice of microphones.
USB Host function ready for CD burning on an off-the-shelf external CD-R drive.
Improved 132 x 64 dot-matrix LCD and self illuminating keys visually show the current status.
Improved built-in digital effects including Reverb, Delay as well as Guitar Amp and Microphone simulations
Black colored top panel design
Analog guitar distortion with the dedicated knob on Input A.
Full-track (8-track) bouncing to a "New Song (track 7/8) for PC transfer and CD burning.
Mastering effects for stereo buss.
USB port for stereo WAV file transfer to and from PC
AC and Battery (6 x AA alkaline cells) operation. Approx. 4 hours maximum operation time with batteries. Includes AC adapter.
Built-in microphone for handy song memo.
Two headphones outputs.
Free "WAV Manager" software available for multiple mono files transfer to and from PCTechnical InfoRecording / Playback
Recording medium CompactFlash
Recording time approx. 6 minutes (8-track on 256MB CF) normal mode
Recording format FAT16
Sampling frequency 44.1 kHz (Normal Mode), 22.05 kHz (LP Mode)
Quantization 16-bit linear (non-compression)
A/D converter 24-bit Delta-Sigma
D/A converter 24-bit Delta-Sigma
No. of recording track 8 tracks maximum
No. of simultaneous rec. 2 tracks
Recording/reproduction frequency 20 Hz - 20 kHz (Normal Mode)
Dynamic range 87dB or more (typical) (Normal Mode)
T.H.D. 0.05% or less (typical) (Normal Mode)
Inputs / Outputs
Analog in (input A/B)
Connector XLR-3-31 type (Pin2:hot) and 6mm TRS phone
Input level -48dBV (MIC) - +4dBV (LINE)
Input impedance 1.5k ohm or more 400k ohm or more (GUITAR on INPUT A)
Phantom power P48V (on/off selectable)
Stereo out (L, R)
Connector 6mm stereo phone
Output level -10dBV (unbalance)
Load impedance 10k ohm or more
Headphones (phone 1, 2)
Connector 2 x 6mm stereo phone
Max. output 30mW or more (at 32 ohm)
Load impedance 16 ohm or more
MIDI out
Connector DIN 5 pin
Format MIDI standard
Foot switch
Connector 6mm phone
Level TTL level
USB 2.0 HI-SPEED
Connector B type
USB 1.1
Connector A type
General
Dimensions 286(W) x 220(D) x 65(H) mm
Weight approx. approx. 1.6kgs
Power requirement DC12V, 400mA |
Connect
Multiple units can be daisy-chained over the FireWire bus, or kept in sync using the DIN connectors when recording on multiple USB devices, making iCE-16 the perfect companion for both small and large analogue consoles such as our acclaimed ZED, MixWizard and GL mixers. Plug into your desk Direct Outs or use a mix of Groups and Aux sends to save on channels.
Record
The USB DRIVE is automatically detected and checked by the system. Starting the recording is as simple as pushing a button. Remove and plug the key into a computer to access or transfer the WAV files to any DAW.
Interface
Removing the USB stick or powering up the unit without one enables the USB / FireWire interface. Signals present at the inputs will be sent to the Mac or PC on channels 1-16. WDM/ASIO drivers and USB2.0 class compliance ensure full compatibility with most DAWs, including Logic, Sonar, Cubase and Pro Tools.
Play
Fancy a ʽvirtual soundcheckʼ or just need to play cues during a live gig? Tracks can be played back directly from the USB drive and full multichannel audio can be sent from the computer to the ICE-16 analogue Outputs.
|
Reviews
There are no reviews yet.