| Content | Uses a system of interchangeable input capsules that can be swapped out as easily as the lens of a camera
Includes detachable X/Y capsule (XYH-5) with extended signal capacity and shockmounted mics for reduced handling noise
Compatible with all Zoom input capsules
Four-track simultaneous recording
Large backlit LCD display
Records directly to SD and SDHC cards up to 32GB
Up to 24-bit/96kHz audio in BWF-compliant WAV or a variety of MP3 formats
Two mic/line inputs with XLR/TRS combo connectors, each with selectable phantom power and -20dB pad
Analog-style gain controls for each input
Protective "roll-bar" type covers prevent accidental movement of gain controls
Plug-in power (2.5 volts)
Built-in effects, including low-cut filtering, compression and limiting
Chromatic tuner and metronome
Auto-record, Pre-record and Backup-record functions mean that you'll never miss that perfect take
MS decoding
Multitrack to stereo internal mixdown
Normalize, Divide and Trim editing
Voice memo and up to 99 marks per recording
A/B loop playback
Variable playback speed and variable pitch without affecting playback speed
Multichannel and stereo USB audio interface for PC/Mac/iPad with loop back function
Mountable to DSLR or camcorder with optional HS-01 Hot Shoe Mount adapter
Uses two standard AA alkaline or NiMH rechargeable batteries
Over 15 hours of operation with alkaline batteries
GENERAL
Recording media:
SD card: 16MB to 2GB , SDHC card: 4GB to 32GB
Display:
Backlit LCD (128 x 64 pixels)
INPUTS
INPUTS L/R [XYH-5 X/Y mic]:
Mic type: Unidirectional
Sensitivity: -45 dB, 1 kHz at 1 Pa
Input gain: -∞ to 52 dB
Max sound pressure input: 140 dB SPL
MIC/LINE IN :
Connector: 1/8" stereo mini jack
Input gain: - ∞ to 52 dB
Input impedance: 2 k Ω or more
Plug-in power: 2.5V supported
Backup recording: -12dB lower than set L/R input gain
INPUTS 1/2:
Connectors: XLR / TRS combo jacks
(XLR: Pin 2 hot / TRS: Tip hot)
Input gain (PAD OFF): -∞ to 55.0 dB
Input gain (PAD ON): -∞ to 35.0 dB
Input impedance: 1.8 k Ω or more
Max input level: +22 dBu (PAD ON)
Phantom power: +12V /+24V /+48V
Equivalent Input Noise (EIN): -120 dBu or less
OUTPUTS
LINE OUT :
Connector: 1/8" stereo mini jack
Rated output level: -10 dBm
Output load impedance: 10k Ω or more
PHONE OUT :
Connector: 1/8" stereo mini jack
Output Level: 20 W +20 W into 32 Ω load
Built-in speaker:
400mw 8 Ω mono
RECORDING FORMATS
STEREO MODE:
WAV (BWF-compliant)
Sampling frequency: 44.1/48/96 kHz
Bit rate: 16/24 (Stereo)
Maximum simultaneous recording tracks: 2
MP3
Sampling frequency: 44.1kHz
Bit rate: 48/56/64/80/96/112/32/160/192/224/256/320kbps
MULTITRACK MODE:
WAV (BWF-compliant)
Sampling frequency: 44.1/48 kHz
Bit rate: 16/24 (Mono/Stereo)
Maximum simultaneous recording tracks: 6 (L/R + INPUT 1/2 + L/R backup)
USB
Mass Storage Class operation:
Class: USB 2.0 High Speed
Audio Interface operation: Multitrack mode:
Class: USB 2.0 High Speed
Sampling frequency: 44.1/48kHz
Bit rate: 16/24 bit
Inputs / Outputs: 4 / 2
Audio Interface operation: Stereo mode:
Class: USB 2.0 Full Speed
Sampling frequency: 44.1/48kHz
Bit rate: 16 bit
Inputs / Outputs: 2 / 2
USB bus powered operation possible
(iPad operation supported in Stereo mode only)
POWER REQUIREMENTS
AA size (LR6) battery x 2
AC adapter: AD-17 (DC5V/1A/USB-type) (optional)
USB bus power | Recording Media SD/SDHC card (up to 32GB)
Built-in Mic MS stereo & 90-degree XY stereo
Maximum Sound Pressure Level 120dB SPL
Recording Format 《STEREO MODE》
PCM (Quantization : 16/24bit, Sampling Frequency : 44.1/48/96kHz),
MP3 (Bit Rate : 48 to 320kbps, Sampling Frequency : 44.1kHz)
《4CH MODE》
PCM (Quantization: 16/24bit, Sampling Frequency: 44.1/48kHz)
A/D Conversion 24bit, 128times oversampling
D/A Conversion 24bit, 128times oversampling
Signal Processing 32bit
Functions Lo-cut Filter, Compressor/Limiter, Auto Gain, Pre-Rec, Auto-Rec, Tuner,Metronome, Variable Speed Playback, Key Control, A-B Repeat,File Dividing, Normalize, MP3 Post-Encode, Marker, Surround Mixer
Display 128 x 64 pixel, backlit LCD
Input Gain 0 to +39dB
Mic / Line Input 1/8" stereo phone jack (Plug-in power supported)
Input impedance 2kΩ (Input level: 0 to -39dBm)
Phones / Line Output 1/8" stereo phone jack
Rated Output Level -10dBm
Output Load Impedance 10kΩ or more
Phones Output Level 20mW + 20mW into 32Ω load
Built-in Speaker 400mW 8Ω
USB Mini-B type, Mass Storage Class operation (USB2.0 High Speed compatible),
Audio Interface operation (16bit, 44.1kHz/48kHz)
Power Requirements AA/LR6 battery x 2, or AC adapter AD-17 (DC5V/1A/center positive)
Battery Life 20 hours (16bit/44.1kHz WAV recording)
Dimensions 67.6 (W) x 113.8 (D) x 42.7 (H) mm
Weight 130g (without batteries) |
When inspiration hits, the last thing you need is a user interface that gets in the way. Slows you down. Turns you off. No fear of that. 25 knobs and 13 sliders get you immediate access to where the action is.
Unique to the MR16HD are 33 stellar EQ presets available to each input and 2 AUX sends for connecting to external gear. Add to this the convenience of WAV file recording, digital effects, mastering effects, analog guitar distortion and mic simulation and youʼve got just about the slickest, highest quality and downright easiest to use 16 track available on the market.
Features:
16 recording tracks to hard drive 16-bit resolution at 44.1 kHz -- no compression
4 track simultaneous recording -- great for capturing multiple instruments/vocal parts
4 XLR inputs With phantom power and trim control
Extended recording time -- more than 7.5 hours of 16-track recording at CD quality
Full 16-track bouncing Mix-down -- all tracks in stereo
FAT32 Disc Format and WAV Recording Plus USB port for easy transfer of recordings to PC
2 x AUX For connection to outboard gear
S/P DIF Digital Out For digital mastering to external CD recorder, MD etc.
Input EQ Library 33 sound shaping presets available for all inputs
Fantastic Built-In Digital FX Reverbs, guitar amp simulations etc. (see MR-8HD)
Analog Guitar Distortion Awesome distortion (see MR-8HD)
Direct CD-RW Connection via USB Master direct to USB CD-RW (no PC required)
MR16HD/CD model Features as above with in-built CD-RW
WavManager(Windows) ver 2.01 WAV Manager is a utility software application that enables you to import each audio track from a song created using the MR-8, MR-8mk2, MR-8HD, and MR16HD (hereinafter called MR-8/HD) Multitrackers into your PC as a standard mono WAV file (eight files for an 8-track song). In addtion, WAV file data created and edited on the PC can be exported to MR-8/HD.
The New Version 2.01 Now Features:
CD Writing function (now you can burn a CD from your MR-8/HD using the CD-R/RW drive in your computer
A-B part Import Function
New Song Creating Function.
WavManager (Mac OS) ver 2.0 WAV Manager for Mac is a utility software application that enables you to import each audio track from a song created by the MR-8 and MR-8HD (hereinafter called MR-8/HD) into the Mac as a standard mono WAV file (eight files for an 8-track song). Also, WAV file data created and edited in the Mac can be exported to MR-8/HD.
Optional MR16HDCD Recording Studio Pack Contents:
1 x Stoppit Microphone Pop Filter/Popper Stopper
2 x CBI American-Made Instrument Cable GA-1 (10 foot)
1 x On Stage 7701B Tripod Boom Mic Stand
1 x Audio-Technica AT2020 Side Address Studio Microphone
1 x Memorex CDR80 50-Pack Spindle (52x, 700MB)
1 x Fostex PM05MKII Powered Nearfield Monitors (Pair)
1 x CBI MLC20 Mic Cable (20 Foot)
Optional MR16HD Recording Studio Pack Contents:
1 x Hosa CPP203 Dual 1/4 in. To Dual 1.4 in. Cable (9.75 Foot)
1 x RaXXess Stoppit Microphone Pop Filter/Popper Stopper
1 x OnStage 7701B Tripod Boom Mic Stand
1 x Whirlwind MC20 XLR Microphone Cable (20 Foot)
1 x Fostex PM05MKII Powered Nearfield Monitors (Pair)
1 x Audio-Technica AT2020 Side Address Studio Microphone
1 x Memorex CDR80 50-Pack Spindle (52x, 700MB) |
The Tascam iM2X turns an Apple iPhone 4, iPad or iPod Touch 4G into a powerful PCM audio recorder for CD-quality recordings. It consists of a pair of condenser microphones and a high-quality preamp and plugs into the dock connector of the iOS device. The microphone elements are XY oriented for clear stereo definition and minimal phase differences. Moreover, they are adjustable over 180 degrees for the best sound placement.
Unlike mics that use the iOS deviceʼs built-in preamp, the iM2X with its internal A/D converter ensures low noise and better linearity in frequency response. The microphone elements also used in Tascam DR series recorders can handle sound pressure levels up to 125 dB to capture the loudest concerts and instruments without distortion. Thanks to an input level control and a two-colour level meter, level adjustment is very simple. A switchable limiter also contributes to this by reducing sudden peaks and protecting against unforeseen overload.
The iM2X powered through the dock connector, so no battery is required. A USB input is provided to charge the iOS device for long recordings, either through a computer or a USB charger.
An appropriate 2-track recording application (Tascam PCM Recorder) for iOS devices can be downloaded from AppStore at no charge.
Main Features
Turns your Apple iPhone 4, iPad or iPod Touch 4G into a high-grade PCM audio recorder
Stereo condenser microphone in XY orientation for clear stereo definition and minimal phase differences
Accepts sound pressure level up to 125 dB SPL
Microphone can be swivelled by 180 degrees to capture sound sources in front or behind the unit
Allows recordings in CD quality (44.1kHz/16-bit)
Input level rotary control
Input level indicator (green/red)
Switchable limiter to avoid distorted recordings
Power supply via dock connector, no battery required
USB connector available for recharging the iOS device
Easy setup (attaches to the deviceʼs dock connector)
Tascam 2-track recording app can be downloaded from the Apple AppStore at no charge
Specifications
General
Microphone type Cardioid condenser (stereo)
Maximum input level 125 dB SPL
Input level adjustment range 0–40 dB
Frequency range 10 Hz – 20 kHz
Sampling frequency 44.1 kHz
Bit rate 16 bit
iOS device recharging port USB Mini-B connector
iOS device connector 30-pin dock connector
Device support iPhone 4S, iPhone 4, iPad (3rd generation), iPad 2, iPad or iPod touch (4th generation)
Power supply and other specifications
Power supply Provided through the iOS device connector
Power consumption 90 mW
Dimensions (W x H x D) 56 mm x 57 mm x 22 mm (including connector)
Weight 30 g
Operating temperature range 5–35 °C
Design and specifications subject to change without notice. |
* Instrument trainer / recorder
* 1/4" guitar/bass input
* Guitar/bass effects including amp modelling, delay, reverb, chorus and more
* Records 44.1kHz/16-bit WAV files
* Playback 16 or 24-bit WAV files or MP3 files
* SD/SDHC card media slot with included 2GB card
* Overdub recording allows sound-on-sound build up of an arrangement
* Loop playback using dedicated buttons
* Variable Speed Audition speeds up or slows down playback without changing the pitch
* Chromatic Tuner and Metronome
* USB 2.0 jack for high-speed music transfer
* Dedicated keys and large LCD display for easy operation
* Angled desktop design
* Includes 2GB SD card, AA batteries, USB cable
|
- 16 Recording Tracks to Hard Drive: 16-bit resolution at 44.1 kHz - no compression
- Extended Recording Time: More than 7.5 hours of 16-track recording at CD quality
- FAT32 Disc Format and WAV Recording: Plus USB port for easy transfer of recordings to PC
- Input EQ Library: 33 sound shaping presets available for all inputs
- Direct CD-RW Connection via USB: Master direct to USB CD-RW (no PC required)
|
Reviews
There are no reviews yet.