| Content | Uses a system of interchangeable input capsules that can be swapped out as easily as the lens of a camera
Includes detachable X/Y capsule (XYH-5) with extended signal capacity and shockmounted mics for reduced handling noise
Compatible with all Zoom input capsules
Four-track simultaneous recording
Large backlit LCD display
Records directly to SD and SDHC cards up to 32GB
Up to 24-bit/96kHz audio in BWF-compliant WAV or a variety of MP3 formats
Two mic/line inputs with XLR/TRS combo connectors, each with selectable phantom power and -20dB pad
Analog-style gain controls for each input
Protective "roll-bar" type covers prevent accidental movement of gain controls
Plug-in power (2.5 volts)
Built-in effects, including low-cut filtering, compression and limiting
Chromatic tuner and metronome
Auto-record, Pre-record and Backup-record functions mean that you'll never miss that perfect take
MS decoding
Multitrack to stereo internal mixdown
Normalize, Divide and Trim editing
Voice memo and up to 99 marks per recording
A/B loop playback
Variable playback speed and variable pitch without affecting playback speed
Multichannel and stereo USB audio interface for PC/Mac/iPad with loop back function
Mountable to DSLR or camcorder with optional HS-01 Hot Shoe Mount adapter
Uses two standard AA alkaline or NiMH rechargeable batteries
Over 15 hours of operation with alkaline batteries
GENERAL
Recording media:
SD card: 16MB to 2GB , SDHC card: 4GB to 32GB
Display:
Backlit LCD (128 x 64 pixels)
INPUTS
INPUTS L/R [XYH-5 X/Y mic]:
Mic type: Unidirectional
Sensitivity: -45 dB, 1 kHz at 1 Pa
Input gain: -∞ to 52 dB
Max sound pressure input: 140 dB SPL
MIC/LINE IN :
Connector: 1/8" stereo mini jack
Input gain: - ∞ to 52 dB
Input impedance: 2 k Ω or more
Plug-in power: 2.5V supported
Backup recording: -12dB lower than set L/R input gain
INPUTS 1/2:
Connectors: XLR / TRS combo jacks
(XLR: Pin 2 hot / TRS: Tip hot)
Input gain (PAD OFF): -∞ to 55.0 dB
Input gain (PAD ON): -∞ to 35.0 dB
Input impedance: 1.8 k Ω or more
Max input level: +22 dBu (PAD ON)
Phantom power: +12V /+24V /+48V
Equivalent Input Noise (EIN): -120 dBu or less
OUTPUTS
LINE OUT :
Connector: 1/8" stereo mini jack
Rated output level: -10 dBm
Output load impedance: 10k Ω or more
PHONE OUT :
Connector: 1/8" stereo mini jack
Output Level: 20 W +20 W into 32 Ω load
Built-in speaker:
400mw 8 Ω mono
RECORDING FORMATS
STEREO MODE:
WAV (BWF-compliant)
Sampling frequency: 44.1/48/96 kHz
Bit rate: 16/24 (Stereo)
Maximum simultaneous recording tracks: 2
MP3
Sampling frequency: 44.1kHz
Bit rate: 48/56/64/80/96/112/32/160/192/224/256/320kbps
MULTITRACK MODE:
WAV (BWF-compliant)
Sampling frequency: 44.1/48 kHz
Bit rate: 16/24 (Mono/Stereo)
Maximum simultaneous recording tracks: 6 (L/R + INPUT 1/2 + L/R backup)
USB
Mass Storage Class operation:
Class: USB 2.0 High Speed
Audio Interface operation: Multitrack mode:
Class: USB 2.0 High Speed
Sampling frequency: 44.1/48kHz
Bit rate: 16/24 bit
Inputs / Outputs: 4 / 2
Audio Interface operation: Stereo mode:
Class: USB 2.0 Full Speed
Sampling frequency: 44.1/48kHz
Bit rate: 16 bit
Inputs / Outputs: 2 / 2
USB bus powered operation possible
(iPad operation supported in Stereo mode only)
POWER REQUIREMENTS
AA size (LR6) battery x 2
AC adapter: AD-17 (DC5V/1A/USB-type) (optional)
USB bus power |
The Denon Professional DN-700R Network SD and USB Recorder is a 1U rack mountable recorder and audio playback device designed for installed sound applications such as houses of worship, education, and more. The unit can record to both SD/SDHC cards and USB media either one at a time for longer recording times or simultaneously to both mediums for backup. The unit features extensive DLNA/UPnp networking capabilities such as automatic or timed FTP file archiving of recorded audio with scheduled Network Timer Protocol, as well as full Web setup and control using IP. The built-in Web remote enables full control of the recorder using a mobile browser.
The front panel of the recorder features an OLED display for showing information such as time, sample rate, and file name. A set of rubberized buttons control basic functions such as record, stop, pause, play, forward, back, as well as menu control and file management functions such as move, copy, combine, divide, and undo. A shift button changes these buttons to functions such as dimming the display, marking files, record monitoring, switching to frame mode, and adjusting pitch. A rotary knob button controls recording level, recording balance, and navigates the menu settings. The front of the unit has two SD/SDHC card slots for inserting recording media with ejection buttons, as well as a USB female type A port for plugging in USB media such as thumb drives and external USB hard drives. A second USB female type A port allows you to plug in a USB QWERTY keyboard for entering file information while recording. The unit also includes a 1/4" headphone out and headphone level control knob for monitoring while recording or listening to recorded tracks.
For I/O, the back of the unit features left and right balanced analog 3-pin XLR female inputs, left and right unbalanced analog RCA inputs, a balanced digital 3-pin XLR AES/EBU input, an unbalanced digital coaxial SPDIF input, left and right balanced analog 3-pin XLR male outputs, left and right unbalanced analog RCA outputs, a balanced digital 3-pin XLR AES/EBU output, and an unbalanced coaxial SPDIF output. For remote control, the unit features both an RS-232C and a 25-pin parallel port. The included rack ears can be removed for tabletop operation.
Network Enabled Provides full setup and control of recorder over IP as well as automatic and timed FTP file archiving using Network Timer Protocol Product Manager Software Provides Web remote control from a network connected PC or Mac and allows you to control the recorder using a mobile browser including sequenced programming of multiple recorders and power on/off capabilities Recording Media Records to both SD and SDHC cards as well as USB media in either dual simultaneous mode for redundant backup or serially one followed by the other in relay/cascade mode for longer recording times Connections Features balanced XLR analog and AES/EBU digital I/O as well as unbalanced RCA analog and SPDIF digital I/O Remote Control Compatible with RS-232C, Parallel GPIO, and Denon's RC-400S "Hot Start" serial remote controller for installed applications Direct Control Features bright OLED display and large function buttons for changing recorder settings Front Panel USB Keyboard Input Features USB port for connecting to a USB keyboard and manually editing file name information while recording Timer Record and Playback Records and plays audio according to user-specified markers in time code DMP Mark Editor Software Includes Windows software for editing markers and marker labels placed within the audio file Switchable XLR/Line Combination Inputs Provides optional +48V of phantom power for condenser microphones and can be switched to line level operation
UPC: 883795002769
System
| Network SD/USB Recorder | | Compatible Media | SD/USB memory/USB HDD | | Playable File Formats | SD, USB: FAT16/FAT32/HFS+ | | Extension | WAV: WAV, AIFF, AIF
MP3: MP3
AAC: M4A with AAC-LC compression | | Resolution | WAV: 16-bit, 24-bit | | Bit Rate | MP3: 32 to 320 kbps and VBR
AAC: 64 to 320 kbps and VBR | | Sampling Frequency | WAV: 96, 48, 44.1 kHz
MP3: 48, 44.1 kHz
AAC: 48, 44.1 kHz | | Number of Channels | 2 (stereo), 1 (mono) | | Frequency Response | 20 to 20,000 Hz (+0.5 dB/ -1 dB) | | S/N Ratio | More than 89 dB (A-weighted) | | Total Harmonic Distortion | Less than 0.01% | | Dynamic Range | More than 106 dB (for 24 bit WAV playback) | | Channel Separation | Less than -90 dB | | Variable Pitch Width | -16% to 16% | | Variable Trim Adjustment Width | ± 2.0 dB |
|
Features at a glance - Supports Sennheiser wireless system mics and transmitters (DR-10CS)
- Supports Shure wireless system mics and transmitters (DR-10CH, DR-10CS with optional AK-DR10CH panel)
- Supports Sony/RAMSA wireless system mics and transmitters (DR-10CS/DR-10CH with optional AK-DR10CR panel)
Note: The Sony/RAMSA panel has a sliding switch to allow proper wiring configuration - 48kHz/24-bit linear PCM mono recording
- WAV files (compatible with BWF format)
- Media: microSD/SDHC cards (supports 32GB capacities)
- Sliding record switch and hold function to prevent misoperation during recording
- Dual recording function
- automatic file closing function to prevent the loss of already recorded data
- High/Mid/Low recording level settings
- Low-cut filter
- Limiter
- Automatic level function
- With a built-in clock function, supports BWF files that can have time information added - convenient for editing and searching
- Time track incrementing function can create new files at regular intervals (every 15 minutes) during recording
- Playback function allows recorded data to be checked immediately
- Headphone output
- Easy-to-read organic EL display
- micro USB B port enables easy data exchange with computers
- Records at least 10 hours on a single AAA battery * using alkaline batteries (EVOLTA)
- Unit settings can be created and transferred as a computer text file
- Settings can be transferred between DR-10C units using the infrared transmission function
- Firmware can be updated using a microSD card
- Belt clip included
- Silicon band that can be used to attach the unit to a transmitter included
- Custom case for storing the unit and accessories included
- RoHS-compliant product
|
The ultimate record-anywhere multitrack.
Capture inspiration whenever and wherever you are.
The new MR-8 Mk II is the easiest to use digital multitrack ever. If you can operate a tape recorder, you'll be recording and multitracking within minutes of opening the box.
By putting all the major controls and functions right there on the top panel instead of buried in a confusing menu system, the MR-8 Mk II, unlike some other recorders, actually aids you in capturing your musical ideas. In addition there's great sounding built-in digital effects, guitar amp and mic simulators, handy mix-down effects, plus the ability to hook up to a PC for data editing, and backing up your songs.
You create. Fostex records.
New for the Mk II is the USB host feature which allows for the easy connection of an 'off-the-shelf' CD-R burner via USB. Making CD masters has never been more simple.
Recording time
Recording time in normal mode (16bit/44.1kHz) is approx. 25 track-minutes on the supplied 128MB CF card and 50 track-minutes on a 256MB card. Extended mode (16bit/22.05kHz) doubles the recording time. Note that recording time varies depending on recorded source, punch in/out, undo/redo status, etc.
Features
8 tracks of recording and playback using CompactFlash cards
2 track simultaneous recording
Superb in-built digital effects inc Mic and Amp simulations
USB Host function for CD burning with 'off-the-shelf' CD burner
2 mic inputs with +48V Phantom Power
Details
8-track recording onto CompactFlash Card.
High quality sound recording and playback with uncompressed linear 16-bit/44.1 kHz digital audio (normal mode) with 2 track simultaneous recording and 8 track playback.
LP Mode (16-bit/22.05 kHz) doubles the recording time.
Physical knobs and buttons for intuitive operations. A new dial knob for menu selection.
Newly added +48V Phantom Power on all two Mic Inputs for wider choice of microphones.
USB Host function ready for CD burning on an off-the-shelf external CD-R drive.
Improved 132 x 64 dot-matrix LCD and self illuminating keys visually show the current status.
Improved built-in digital effects including Reverb, Delay as well as Guitar Amp and Microphone simulations
Black colored top panel design
Analog guitar distortion with the dedicated knob on Input A.
Full-track (8-track) bouncing to a "New Song (track 7/8) for PC transfer and CD burning.
Mastering effects for stereo buss.
USB port for stereo WAV file transfer to and from PC
AC and Battery (6 x AA alkaline cells) operation. Approx. 4 hours maximum operation time with batteries. Includes AC adapter.
Built-in microphone for handy song memo.
Two headphones outputs.
Free "WAV Manager" software available for multiple mono files transfer to and from PCTechnical InfoRecording / Playback
Recording medium CompactFlash
Recording time approx. 6 minutes (8-track on 256MB CF) normal mode
Recording format FAT16
Sampling frequency 44.1 kHz (Normal Mode), 22.05 kHz (LP Mode)
Quantization 16-bit linear (non-compression)
A/D converter 24-bit Delta-Sigma
D/A converter 24-bit Delta-Sigma
No. of recording track 8 tracks maximum
No. of simultaneous rec. 2 tracks
Recording/reproduction frequency 20 Hz - 20 kHz (Normal Mode)
Dynamic range 87dB or more (typical) (Normal Mode)
T.H.D. 0.05% or less (typical) (Normal Mode)
Inputs / Outputs
Analog in (input A/B)
Connector XLR-3-31 type (Pin2:hot) and 6mm TRS phone
Input level -48dBV (MIC) - +4dBV (LINE)
Input impedance 1.5k ohm or more 400k ohm or more (GUITAR on INPUT A)
Phantom power P48V (on/off selectable)
Stereo out (L, R)
Connector 6mm stereo phone
Output level -10dBV (unbalance)
Load impedance 10k ohm or more
Headphones (phone 1, 2)
Connector 2 x 6mm stereo phone
Max. output 30mW or more (at 32 ohm)
Load impedance 16 ohm or more
MIDI out
Connector DIN 5 pin
Format MIDI standard
Foot switch
Connector 6mm phone
Level TTL level
USB 2.0 HI-SPEED
Connector B type
USB 1.1
Connector A type
General
Dimensions 286(W) x 220(D) x 65(H) mm
Weight approx. approx. 1.6kgs
Power requirement DC12V, 400mA | | Recorder section
Number of tracks:
2 tracks
2 tracks simultaneous playback
2 tracks simultaneous recording
Recording formats:
Compressed audio format
MP2 format (extension .mp2)
48 kHz@128, 192, 256, 320 kbps
MP3 format (extension .mp3)
44.1 kHz@128, 192, 256, 320 kbps
PCM audio format
WAV format (extension .wav), BWF compliant
44.1 kHz @ 16/24-bit, 48 kHz @ 16/24-bit
88.2 kHz @ 24-bit, 96 kHz @ 24-bit
176.4 kHz @ 24-bit, 192 kHz @ 24-bit
1-bit audio format
2.8 MHz @ 1-bit
DSDIFF format (extension .dff), DSF (extension .dsf), WSD (extension .wsd)
Recording Time:
Maximum 6 hours @ 44.1 kHz/16-bit (for 4GB memory card)
Maximum continuous recording 6 hours
Number of projects:
Recognizes a maximum of 400 projects of each date folder
Mark points:
100 points per project *No mark names
USB functionality:
Connect to computer via USB 2.0, usable as FAT32 USB removable drive
Song editing:
Rename, Delete, Protect
Tuner
Temperament:
Equal temperament, chromatic tuner
Range (sine wave):
27.50 Hz – 1,318.5 Hz (A0 - E6)
Reference pitch:
A = 435 – 445 Hz
Memory Card (SD)
Supported cards:
SD and SDHC cards with a capacity of 512MB-32GB
(SDHC card of class 4 or higher recommended)
General
Display:
128 x 128 pixel LCD with backlight
Power supply:
AA/LR6 alkaline battery x 2;
AA nickel-metal hydride battery x 2;
USB bus power
Power consumption:
1.5W
Dimensions:
(W x D x H): 2.52" x 4.72" x 0.9“
Weight:
4.94 oz. (not including a memory card and batteries)
Main specifications
Frequency response:
20 Hz – 20 kHz ±1.5 dB (MP2/MP3)
10 Hz – 20 kHz ±1.5 dB @Fs44.1 kHz/48 kHz
10 Hz – 40 kHz ±1.5 dB @Fs88.2 kHz/96 kHz/176.4 kHz/192 kHz
10 Hz – 100 kHz (1-bit)
S/N:
90 dB (typical) @IHF-A
THD+N:
0.018% (typical) 20 Hz – 20 kHz
A/D conversion:
2.8224 MHz (1-bit), 24-bit (PCM)
D/A conversion:
2.8224 MHz (1-bit), 24-bit (PCM)
Mic
Connector:
3.5 mm stereo mini phone jack (switchable to Plug-in-Power)
Input impedance:
10k ohms
Nominal level:
-39 dBV
Maximum level:
-27 dBV
Line In
Connector:
3.5 mm stereo mini phone jack
Input impedance:
75k ohms
Nominal level:
-10 dBV
Maximum level:
+2 dBV
Phones
Connector:
3.5 mm stereo mini phone jack
Maximum level:
20 mW+20 mW @ 16 ohms
USB
Connector:
Type mini-B
Format:
USB 2.0 compliant, USB mass storage class
Supported operating systems:
Windows 2000, or later; Mac OS X 10.4 or later
Included items
Install CD (“AudioGate” audio file conversion application)
AudioGate (v2.0) System Requirements
Windows
Supported OS:
Microsoft Windows XP Home Edition/Professional Edition Service Pack 3 or later
Microsoft Windows Vista Service Pack 2 or later
Microsoft Windows 7
Supported Computers:
Processor: Intel Pentium III/1GHz or faster
Memory: 256MB or larger (512 or larger recommended)
Hardware: A USB port that meets the operating requirements of Windows;
A writable CD/DVD drive is required in order to create audio CDs or DSD discs.
Mac OS X
Supported OS:
Mac OS X 10.4 or later
Supported Computers:
Processor:Apple G4/800MHz or faster (Intel-based Mac recommended)
Memory: 256MB or larger (512 or larger recommended)
Hardware: A USB port that meets the operating requirements of Mac OS X;
A writable CD/DVD drive is required in order to create audio CDs or DSD discs. |
Reviews
There are no reviews yet.