| Content |
Main Features
Interchangeable input capsules that can be swapped out as easily as the lens of a camera Six-track simultaneous recording Four mic/line inputs with XLR/TRS combo connectors Gain controls (real knobs!) and -20dB pads for each input Phantom power for all main inputs: +12/+24/+48V Large full-color LCD display, angled so it's easy to read in all environments Records directly to SD, SDHC and SDXC cards up to 128GB Up to 24-bit/96kHz audio in BWF-compliant WAV or a variety of MP3 formats Auto-record, Pre-record and Backup-record functions mean that you'll never miss that perfect take Multitrack to stereo internal mixdown Independent monitor and playback mixes Virtual VU meters Voice memo and up to 99 marks per recording Overdubbing, up to 99 takes Built-in effects, including low-cut filtering, compression and limiting Onboard MS decoding Normalize, Divide and Trim editing Chromatic tuner and metronome Loop Playback with user-defined start and stop points Variable playback speed, from 50% to 150% Variable pitch per track without affecting playback speed USB port for data exchange to and from computer Multichannel and stereo USB audio interface for PC/Mac/iPad Camera strap mounts Mounts directly to DSLR or camcorder with optional HS-01 Hot Shoe Mount adapter Accepts standard AA alkaline or NiMH rechargeable batteries Over 20 hours of operation with 4 AA alkaline batteries
| Recording media | 16MB-2GB SD cards
4GB-32GB SDHC cards
64GB-128GB SDXC cards | | Inputs | Inputs L/R | XY mic (XYH-6)
Mic Type: Unidirectional
Sensitivity: -41 dB, 1 kHz at 1 Pa
Input Gain: -∞ to 46.5 dB
Maximum Sound Pressure Input: 136 dB SPL
[MIC/LINE IN]
Connector: 1/8" stereo mini jack
Input Gain: -∞ to 46.5 dB
Input Impedance: 2 kΩ
Plug-in Power: 2.5V supported | MS mic (MSH-6)
Mic Types: Unidirectional and bi-directional
Sensitivity: -37 dB, 1 kHz at 1 Pa (unidirectional),
-39 dB, 1 kHz at 1 Pa (bi-directional)
Input Gain: -∞ to 42.5 dB
Maximum Sound Pressure Input: 120 dB SPL (unidirectional),
122 dB SPL (bi-directional) | Shotgun mic (SGH-6 [Option])
Mic Type: Unidirectional (mic unit x 3)
Polar Pattern: Super-cardioid
Sensitivity: -39 dB, 1 kHz at 1 Pa (each mic unit)
Input Gain: -∞ to 50 dB
Maximum Sound Pressure Input: 122 dB SPL (unidirectional) | Inputs
1 to 4 | Connectors: XLR/TRS combo jacks
(XLR: 2 hot / TRS: TIP hot)
Input Gain (PAD OFF): -∞ to 55.5 dB
Input Gain (PAD ON): -∞ to 35.5 dB
Input Impedance 6.8kΩ
Maximum Input Level: +22 dBu (PAD ON)
Phantom Power: +12V / +24V / +48V
Equivalent Input Noise (EIN): -120 dBu or less | | Outputs | Line Out | Connector: 1/8" stereo mini jack
Rated Output Level: -10 dBu
(when output load impedance is 10 kΩ or more) | | Phone Out | Connector: 1/8" stereo mini jack
Output Level: 20 mW + 20 mW (into 32Ω load) | | Built-in Speaker | 400 mW/8 Ω mono speaker | | Recording Formats | [WAV setting]
Sampling Frequency: 44.1/48/96kHz
Bit Rate: 16/24-bit (Mono/Stereo, BWF-compliant)
Maximum Simultaneous Recording Tracks: 8 tracks (6 tracks + L/R backup)
Backup recording: 12dB lower than set L/R input gain
[MP3 setting]
Sampling Frequency: 44.1kHz Bit Rate: 48-320 kbps
Maximum Simultaneous Recording Tracks: 2 tracks
| Recording Time
(with 2GB card) | 03:08:00 (44.1kHz/16-bit WAV)
34:43:00 (128kbps MP3)
| | Display | 2.0-inch full-color LCD (320 x 240 pixels) | | USB | [Mass Storage Class operation]
Class: USB2.0 High Speed
[Audio Interface operation: Multi-track mode]
Class: USB2.0 High Speed
Inputs / Outputs: 6 / 2
Sampling Frequency: 44.1/48/96kHz
Bit Rate: 16/24bit
Note: Use with Windows requires a driver, but Macintosh does not.
[Audio Interface operation: Stereo mode]
Class: USB2.0 Full Speed
Inputs / Outputs: 2 / 2
Sampling Frequency: 44.1/48kHz
Bit Rate: 16 bit
Note: iPad operation supported in stereo mode only. | Battery Life
(with alkaline battery) | XY mic, 44.1kHz/16-bit (stereo x 1): 21 hours
XY mic and Inputs 1, 2, 3 and 4 used, 96kHz/24-bit (stereo x 3): 9 hours 45 minutes
Note: The above times are estimates. Approximate continuous recording times when using battery power were calculated using our own testing method. They may differ greatly depending on operating conditions. | | Power | AA size (LR6) battery x 4
AC adapter: AD-17 (DC5V/1A/USB-type) (optional)
USB bus power | | Dimensions | H6: 77.8mm（W）x 152.8mm（D）x 47.8mm（H）
XYH-6: 78.9mm（W）x 60.2mm（D）x 45.2mm（H）
MSH-6: 58.0mm（W）x 67.6mm（D）x 42.1mm（H） | | Weight | H6： 280g (without batteries)
XYH-6： 130g
MSH-6： 85g | | Included Accessories | Operation manual, XYH-6 X/Y mic capsule, MSH-6 MS mic capsule, SD card (2GB), AA size (LR6) battery x 4, Cubase LE Software, WSH-6S Foam Windscreen, USB Cable, Case | | Optional Accessories | SGH-6 Shotgun mic capsule
EXH-6 Dual XLR/TRS Combo capsule
HS-1 Hot Shoe Mount
APH-6 Accessory Pack (includes RCH-6 wired Remote Controller, AD-17 USB-type AC adapter, WSH-6H Hairy Windscreen) |
|
Features at a glance - Supports Sennheiser wireless system mics and transmitters (DR-10CS)
- Supports Shure wireless system mics and transmitters (DR-10CH, DR-10CS with optional AK-DR10CH panel)
- Supports Sony/RAMSA wireless system mics and transmitters (DR-10CS/DR-10CH with optional AK-DR10CR panel)
Note: The Sony/RAMSA panel has a sliding switch to allow proper wiring configuration - 48kHz/24-bit linear PCM mono recording
- WAV files (compatible with BWF format)
- Media: microSD/SDHC cards (supports 32GB capacities)
- Sliding record switch and hold function to prevent misoperation during recording
- Dual recording function
- automatic file closing function to prevent the loss of already recorded data
- High/Mid/Low recording level settings
- Low-cut filter
- Limiter
- Automatic level function
- With a built-in clock function, supports BWF files that can have time information added - convenient for editing and searching
- Time track incrementing function can create new files at regular intervals (every 15 minutes) during recording
- Playback function allows recorded data to be checked immediately
- Headphone output
- Easy-to-read organic EL display
- micro USB B port enables easy data exchange with computers
- Records at least 10 hours on a single AAA battery * using alkaline batteries (EVOLTA)
- Unit settings can be created and transferred as a computer text file
- Settings can be transferred between DR-10C units using the infrared transmission function
- Firmware can be updated using a microSD card
- Belt clip included
- Silicon band that can be used to attach the unit to a transmitter included
- Custom case for storing the unit and accessories included
- RoHS-compliant product
| TASCAM's award winning DR-60D is the new audio recording solution for on-set filmmakers and videographers using DSLR's. For years, filmmakersProSound Network Best of Show have been trying different methods for recording audio, using bulky recorders designed for music and trying to transform the inferior audio technology built-into DSLR's. Now TASCAM has designed an answer that pros and amateurs alike have been waiting for.
The DR-60D is a brand new 4-track solid-state recorder utilizing TASCAM's decades of experience. The recorder utilizes high-grade HDDA pre-amps, legendary AD converters, and a durable but lightweight structure and shape. This device will fit snuggly under any camera or into any rig, and record up to 96kHz/24-bit high quality audio straight to SD/SDHC media. Filmmakers have at their disposal two 1/4“-XLR Locking Combo MIC/LINE Inputs, 3.5mm Stereo MIC Input, Camera In, Camera Out, Line Out and Headphone Out. Both 1/4“-XLR Combo Inputs supply +48V Phantom Power and the 3.5mm Input supplies Plug-In Power for microphones requiring a bias voltage.
The DR-60D is incredibly easy to use, employing TASCAM's very popular user interface and external controls for every major operation. The body structure, soft-touch keys and dials are designed specifically to help eliminate handling noise. The multiple record modes include, 4-Channel Record, Auto Record and TASCAM's Dual Record "Safety Track" Mode make the DR-60D one of the most versatile recorders on the market.
- Record to SD/SDHC card (Up to 32GB)
- Simultaneously record up to 4 tracks
- Record Mode：MONO, STEREO, DUAL MONO, DUAL STEREO, 4-CHANNEL
- Recording format：44.1/48/96kHz 16/24bit (WAV/BWF)
- TASCAM original HDDA microphone preamps
- Recording levels can be adjusted independently for the 1/L, 2/R and 3-4 inputs
- Two XLR/TRS inputs support +4dBu line level input and phantom power (24 or 48VDC on XLRF)
- Plug-in power and high-output mic input supported on inputs 3-4
- CAMERA OUT connector for output from the DR-60D's mixer (adjustable gain)
- CAMERA IN connector for sound monitoring from the camera
- Independent adjustable LINE OUT and HEADPHONE jacks for high-quality sound output
- 50mW/ch headphone output
- Tripod mounting socket (bottom) and DSLR mounting screw attachment (top)
- Handles protect the screen and can be used to attach a shoulder strap
- Soft-Touch Rubber Keys for silent operation
- HOLD switch to prevent accidental operation
- QUICK button feature for easy access to various functions
- 128x64 pixel LCD with backlight
- USB 2.0 connection for high-speed transferring of files
- Mini USB cable included
- Operates on 4-AA batteries, an AC adapter (sold separately) or USB bus power
- Can extend battery life with BP-6AA battery pack (sold separately)
- Dedicated remote control jack for the wired RC-10 remote control or RC-3F footswitch (both sold separately)
- Internal mixer: PAN and LEVEL controls
- Low cut filter(40/80/120Hz)
- Limiter (1/L and 2/R can be selected for link-operation)
- Delay function for microphone distance adjustment (up to 150ms)
- M-S decode function
- Slate tone generator (AUTO/MANUAL)
- Selectable duration of slate tone from four positions (0.5/1/2/3 sec, when auto-generated)
- Selectable slate tone generation. 3 positions: OFF/HEAD/HEAD+TAIL, when auto-generated
- File name format can be set to use a user-defined word or date
- Dual-recording function allows two files to be recorded simultaneously at different levels
- Auto-record function can automatically start and stop recording at set level
- Pre-recording function allows the unit to record a 2 second sound buffer before recording is activated
- Self-timer function for solo recording
- New file starts recording automatically without interruption when maximum file size is reached
- Track incrementing function allows a recording to be split by creating a new file when desired
- Jump back and play function
- Equalizer function for playback, and level alignment function to enhance the perceived overall sound pressure
- Resume function to memorize the playback position before the unit is turned off
- MARK function up to 99 points per audio track
- DIVIDE function
SPECIFICATIONS
| Recording media |
SD card(64MB to 2GB), SDHC card(4GB to 32GB) |
| Recording format |
|
| WAV |
44.1/48/96kHz, 16/24bit |
| BWF |
44.1/48/96kHz, 16/24bit |
| Number of channels |
4channel (stereo x2) |
| Analog audio input |
|
| 1/L, 2/R connectors |
|
| Connector |
XLR-3-31 (1:GND, 2:HOT, 3:COLD)/6.3mm(1/4“)TRS standard jack |
| Set to "MIC / MIC+PHANTOM“ |
|
| Input impedance |
2k ohms |
| Phantom power |
48V +/-4V(10mA/CH) / 24V +/-4V(10mA/CH) |
| Maximum input level |
0dBu |
| Minimum input level |
-72dBu |
| MIC input gain |
TRIM MAX |
| LOW |
+11dB |
| MID |
+36dB |
| HIGH |
+52dB |
| Set to "LINE“ |
|
| Input impedance |
10k ohms or more |
| Standard input level |
+4dBu |
| Maximum input level |
+24dBu |
| 3-4 connector |
|
| Connector |
3.5mm (1/8“) stereo mini jack (this connector can be supplied plug-in power) |
| Input impedance |
10k ohms |
| Maximum input level |
+10dBV |
| Minimum input level |
-50dBV |
| MIC input gain |
TRIM MAX |
| LOW |
+3dB |
| HIGH |
+26dB |
| CAMERA IN connector |
|
| Connector |
3.5mm (1/8“) stereo mini jack |
| Input impedance |
10k ohms |
| Standard input level |
-10dBV |
| Maximum input level |
+6dBV |
| Analog audio output |
|
| CAMERA OUT connector |
|
| Connector |
3.5mm (1/8“) stereo mini jack |
| Output impedance |
200 ohms |
| Standard output level |
-50dBV |
| Maximum output level |
-30dBV |
| LINE OUT connector |
|
| Connector |
3.5mm (1/8“) stereo mini jack |
| Output impedance |
200 ohms |
| Standard output level |
-10dBV |
| Maximum output level |
+10dBV |
| PHONES connector |
|
| Connector |
3.5mm (1/8“) stereo mini jack |
| Maximum output level |
50mW + 50mW |
| USB |
|
| Connector |
Mini-B type |
| Format |
USB2.0 HIGH SPEED mass storage class |
| REMOTE |
|
| Connector |
2.5mm TRS jack |
| Power |
Four AA batteries(Alkaline or NI-MH),
USB bus power,
Dedicated AC adapter(TASCAM PS-P515U, sold separately),
Dedicated external battery pack(TASCAM BP-6AA, sold separately) |
| Power consumption |
5.4W |
| Continuous operation time |
2ch WAV, 44.1kHz, 16bit rec |
| DR-60D |
|
| Alkaline batteries (EVOLTA) |
About 2:30 min (Phantom on)
About 4:30 min (Phantom off) |
| NI-MH batteries (eneloop) |
About 3:15 min (Phantom on)
About 5:00 min (Phantom off) |
| NI-MH batteries (eneloop pro) |
About 3:45 min (Phantom on)
About 6:00 min (Phantom off) |
| DR-60D+BP-6AA |
|
| Alkaline batteries (EVOLTA) |
About 5:30 min (Phantom on)
About 10:30 min (Phantom off) |
| NI-MH batteries (eneloop) |
About 7:30 min (Phantom on)
About 12:00 min (Phantom off) |
| NI-MH batteries (eneloop pro) |
About 9:30 min (Phantom on)
About 14:30 min (Phantom off) |
| Dimensions |
133(W)×93.2(H)×78(D)mm (with the top adapter attached) |
| Weight |
510g (not including batteries) |
| Operating temperature |
0˚C to 40˚C |
| Standard accessories |
USB cable, warranty card, Owner's manual |
| Computer compatibility |
| Windows |
| OS |
Windows XP, Windows Vista, Windows 7, Windows 8 |
| CPU |
Pentium 300MHz or more |
| RAM |
128MB or more |
| USB |
recommended: USB2.0 |
| Macintosh |
| OS |
Mac OS X Jaguar (V10.2), Mac OS X Panther (V10.3), Mac OS X Tiger (V10.4),
Mac OS X Leopard (V10.5), Mac OS X Snow Leopard(V10.6.8), OS X Lion(V10.7),
OS X Mountain Lion(V10.8) |
| CPU |
Power PC, iMac, G3, G4 266MHz or more |
|
64MB or more |
| USB |
recommended: USB2.0 |
| Audio performance |
| Frequency response |
20-20kHz +0.5/-2dB(LINE IN or MIC IN to LINE OUT, Fs44.1k/48kHz, JEITA)
20-40kHz +0.5/-3dB(LINE IN or MIC IN to LINE OUT, Fs96kHz, JEITA) |
| Distortion |
0.02% or less(LINE IN or MIC IN to LINE OUT Fs44.1k/48k/96kHz, JEITA) |
| S/N ratio |
92dB or more(LINE IN or MIC IN to LINE OUT Fs44.1k/48k/96kHz, JEITA) |
| Equivalent input noise |
-120dBu or more |
Recording duration
The table below shows the maximum recording time on SD/SDHC cards of different capacities for different file formats for recording.
| File format(recording setting) |
SD/SDHC card capacity(hours:mintes) |
| 1GB |
2GB |
4GB |
8GB |
| WAV/BWF 16bit(STEREO) |
44.1kHz |
1:41 |
3:22 |
6:44 |
13:28 |
| 48kHz |
1:33 |
3:06 |
6:12 |
12:24 |
| 96kHz |
0:46 |
1:33 |
3:06 |
6:12 |
| WAV/BWF 24bit(STEREO) |
44.1kHz |
1:07 |
2:15 |
4:30 |
9:00 |
| 48kHz |
1:02 |
2:04 |
4:08 |
8:16 |
| 96kHz |
0:31 |
1:02 |
2:04 |
4:08 |
- The recording times shown above are estimates. They might differ depending on the SD/SDHC card in use.
- The recording times shown above are not continuous recording times, but rather they are the total possible recording times for the SD/SDHC card.
- If recorded in mono in WAV files, the maximum recording time will be double the figures above.
- For dual and 4-channel recording in WAV/BWF format, the recording times are about half those shown above.
| SPECIFICATIONS
[Recorder]
●Physical Tracks : 24 ●Simultaneous Recording Tracks : 8 ●Simultaneous Playback Tracks : 24 ●Recording Data Format : 44.1/48kHz, 16/24bit WAV ●Maximum Recordable Time : 200 minutes / GB (44.1kHz 16-bit, mono tracks) ●Projects : 1,000 ●Markers : 100 / Project ●Locator : Hours / Min. / Sec. / msec or Bars / Beats / Ticks ●File Editing : Divide, Trim ●Other Functions : Punch-In / Out (Manual, Automatic), Bounce, A-B Repeat, Undo / Redo, Metronome
[Audio interface]
●Input Channels : 8 ●Output Channels : 2 ●Quantization : 24bit ●Sampling Frequency : 44.1, 48, 88.2, 96kHz
[Mixer]
●Faders : 9 ●Level Meters : 4-Segment LED ●Track Parameters : 3-Band Equalizer, Pan (Balance), Effect Send x 2, Invert ●Stereo Links Track pairs : 1/2 to 23/24 selectable
[Effects]
●Algorithms : 9 (CLEAN, DISTORTION, ACO / BASS SIM, BASS, MIC, DUAL MIC, STEREO, 8 x COMP EQ, MASTERING) ●Types : 150 ●Modules : 7 for Insert, 2 for Send / Return ●Patches : 330 for Insert, 60 for Send / Return ●Tuner : Chromatic, Guitar, Bass, Open A/D/E/G, D modal
[Sampler]
●Playback Data Format: 44.1/48kHz, 16/24bit WAV ●Voices: 24 ●Editing Functions: Trim, Time-stretch
[Rhythm]
●Voices: 8 ●Sound Format: 16-bit Linear PCM ●Drum Kits : 10 ●Pads : 8 (velocity-sensitive) ●Precision : 48 PPQN ●Rhythm Patterns : 511/project ●Patterns : 511 (472 factory, 39 blank) / Project ●Beat : 1/4 - 8/4 ●Tempo : 40.0 - 250.0 BPM
[Hardware]
●Recording Media : SD Card (16MB-2GB), SDHC Card (4-32GB) ●A/D Conversion : 96kHz 24bit delta-sigma ADC ●D/A Conversion : 96kHz 24bit delta-sigma DAC ●Display : 128 x 64 pixel LCD (with backlight) ●Inputs : 8 x XLR-1/4''Phone Combo Jack / Input Impedance: (Balanced input) 1kΩ balanced, 2nd hot, (Unbalanced input) 50kΩ unbalanced, (Hi-Z Input) 470kΩ / Input Level: -50dBm to +4dBm continuously variable ●Built-in microphones : Omnidirectional condenser microphones Gain: -50dBm to +4dBm continuously variable ●Phantom Power Supply : 48V / 24V ●Master Output : 1/4“TRS Phone (balanced) / Output Impedance: 1kΩ / Rated Output Level: +4dBm ●Headphones Output : 1/4''Stereo Phone Jack, 20mW x 2 (at 32Ω load) ●USB : [B type (USB2.0 High-Speed compatible)] Audio Interface / Control Surface or Mass Storage Class operation [A type (USB2.0 High-Speed compatible)] USB Host capability ●Power Requirements : AC adaptor (DC5V/1A/center positive) or AA size (LR6) battery x6 ●Battery Life : 4.5 hours (with backlight on and phantom power off) ●Dimensions : 376(W) x 237.1(D) x 52.2(H) mm ●Weight : 1.3kg (without batteries)
*0dBm=0.775Vrms
R24 USB Audio Interface System Requirments
Windows® Windows® XP SP2 or later / Vista SP1 or later / 7
Intel® Pentium® 4 1.8GHz or better
1GB RAM or more
USB 2.0 compatible port
Intel® Mac OS X 10.4.11 or later / 10.5 / 10.6 / 10.7
Intel® Core Duo processor 1.83GHz or better
1GB RAM or more
USB 2.0 compatible port.
* USB hub is not supported.
* Intel® Chipset is recommended. |
Connect
Multiple units can be daisy-chained over the FireWire bus, or kept in sync using the DIN connectors when recording on multiple USB devices, making iCE-16 the perfect companion for both small and large analogue consoles such as our acclaimed ZED, MixWizard and GL mixers. Plug into your desk Direct Outs or use a mix of Groups and Aux sends to save on channels.
Record
The USB DRIVE is automatically detected and checked by the system. Starting the recording is as simple as pushing a button. Remove and plug the key into a computer to access or transfer the WAV files to any DAW.
Interface
Removing the USB stick or powering up the unit without one enables the USB / FireWire interface. Signals present at the inputs will be sent to the Mac or PC on channels 1-16. WDM/ASIO drivers and USB2.0 class compliance ensure full compatibility with most DAWs, including Logic, Sonar, Cubase and Pro Tools.
Play
Fancy a ʽvirtual soundcheckʼ or just need to play cues during a live gig? Tracks can be played back directly from the USB drive and full multichannel audio can be sent from the computer to the ICE-16 analogue Outputs.
| Uses a system of interchangeable input capsules that can be swapped out as easily as the lens of a camera
Includes detachable X/Y capsule (XYH-5) with extended signal capacity and shockmounted mics for reduced handling noise
Compatible with all Zoom input capsules
Four-track simultaneous recording
Large backlit LCD display
Records directly to SD and SDHC cards up to 32GB
Up to 24-bit/96kHz audio in BWF-compliant WAV or a variety of MP3 formats
Two mic/line inputs with XLR/TRS combo connectors, each with selectable phantom power and -20dB pad
Analog-style gain controls for each input
Protective "roll-bar" type covers prevent accidental movement of gain controls
Plug-in power (2.5 volts)
Built-in effects, including low-cut filtering, compression and limiting
Chromatic tuner and metronome
Auto-record, Pre-record and Backup-record functions mean that you'll never miss that perfect take
MS decoding
Multitrack to stereo internal mixdown
Normalize, Divide and Trim editing
Voice memo and up to 99 marks per recording
A/B loop playback
Variable playback speed and variable pitch without affecting playback speed
Multichannel and stereo USB audio interface for PC/Mac/iPad with loop back function
Mountable to DSLR or camcorder with optional HS-01 Hot Shoe Mount adapter
Uses two standard AA alkaline or NiMH rechargeable batteries
Over 15 hours of operation with alkaline batteries
GENERAL
Recording media:
SD card: 16MB to 2GB , SDHC card: 4GB to 32GB
Display:
Backlit LCD (128 x 64 pixels)
INPUTS
INPUTS L/R [XYH-5 X/Y mic]:
Mic type: Unidirectional
Sensitivity: -45 dB, 1 kHz at 1 Pa
Input gain: -∞ to 52 dB
Max sound pressure input: 140 dB SPL
MIC/LINE IN :
Connector: 1/8" stereo mini jack
Input gain: - ∞ to 52 dB
Input impedance: 2 k Ω or more
Plug-in power: 2.5V supported
Backup recording: -12dB lower than set L/R input gain
INPUTS 1/2:
Connectors: XLR / TRS combo jacks
(XLR: Pin 2 hot / TRS: Tip hot)
Input gain (PAD OFF): -∞ to 55.0 dB
Input gain (PAD ON): -∞ to 35.0 dB
Input impedance: 1.8 k Ω or more
Max input level: +22 dBu (PAD ON)
Phantom power: +12V /+24V /+48V
Equivalent Input Noise (EIN): -120 dBu or less
OUTPUTS
LINE OUT :
Connector: 1/8" stereo mini jack
Rated output level: -10 dBm
Output load impedance: 10k Ω or more
PHONE OUT :
Connector: 1/8" stereo mini jack
Output Level: 20 W +20 W into 32 Ω load
Built-in speaker:
400mw 8 Ω mono
RECORDING FORMATS
STEREO MODE:
WAV (BWF-compliant)
Sampling frequency: 44.1/48/96 kHz
Bit rate: 16/24 (Stereo)
Maximum simultaneous recording tracks: 2
MP3
Sampling frequency: 44.1kHz
Bit rate: 48/56/64/80/96/112/32/160/192/224/256/320kbps
MULTITRACK MODE:
WAV (BWF-compliant)
Sampling frequency: 44.1/48 kHz
Bit rate: 16/24 (Mono/Stereo)
Maximum simultaneous recording tracks: 6 (L/R + INPUT 1/2 + L/R backup)
USB
Mass Storage Class operation:
Class: USB 2.0 High Speed
Audio Interface operation: Multitrack mode:
Class: USB 2.0 High Speed
Sampling frequency: 44.1/48kHz
Bit rate: 16/24 bit
Inputs / Outputs: 4 / 2
Audio Interface operation: Stereo mode:
Class: USB 2.0 Full Speed
Sampling frequency: 44.1/48kHz
Bit rate: 16 bit
Inputs / Outputs: 2 / 2
USB bus powered operation possible
(iPad operation supported in Stereo mode only)
POWER REQUIREMENTS
AA size (LR6) battery x 2
AC adapter: AD-17 (DC5V/1A/USB-type) (optional)
USB bus power |
Reviews
There are no reviews yet.