| Content |
The H4n Handy Recorder has long been a favorite of audio and video aficionados everywhere. It offers four tracks of simultaneous recording, a built-in X/Y stereo microphone, and advanced features such as time stamping, phantom power and mid-side (MS) decoding, as well as onboard multi-effects and guitar/bass amp modeling. Rugged, lightweight and versatile, the H4n is a great audio companion for everything from live concert recording to location videography tomusic-making.
The H4n provides two different ways of recording great-sounding stereo. The X/Y technique is an excellent way to cover a wide area while still capturing sound sources in the center with clarity and definition, making it ideal for all types of live stereo recording. The H4n's built-in X/Y microphone provides two matched unidirectional microphones. The angle of the two can easily be changed from 90 degrees for a tightly focused stereo image to 120 degrees for a wider image. (US Patent8184815) The H4n also provides an onboard MS decoder so you can do MS ('Mid-Side') recording using external microphones. This is an incredible technique that allows you to adjust the width of the stereo image after it has been recorded, while maintaining perfect mono compatibility, making it especially useful for film, video and television projects. | Un-beatable Audio Performance Comes Home to Roost - Meet the Korg MR-2000S!
Korg captured the world's attention with their MR series of DSD mobile recorders and studio tools. After consulting with top recording and mastering professionals, Korg has now created the Korg MR-2000S Studio Recorder; a 2-track mixdown designed from the ground up to bring that same DSD sonic performance home for use in any studio environment.
A DSD and Mastering Recorder Born to Run
In keeping with the MR Series studio recorder heritage of portability, the MR-2000S 1- bit recorder adds a number of new features to meet the requirements of the most demanding studio, yet retains a sleek, single rack-space profile. This compact format is also ideal for any live recording rig; or for grabbing that "off-the-board" live recording night after night - as well as shuttling your recordings from venue to studio and back again. So whether you want to capture that once-in-a-lifetime performance with impeccable detail, or need to transfer those priceless recordings from session to session, the MR-2000S high-resolution audio recorder is ready to roll.
SPECIFICATIONS:
Main Sections
Recorder section
Number of tracks: 2 tracks, 2 tracks simultaneous playback/2 tracks simultaneous recording
Recording formats
-PCM audio format: BWF (extension .wav) 44.1 kHz @ 16/24 bit, 48 kHz @ 16/24 bit, 88.2 kHz @ 24 bit, 96 kHz @ 24 bit,176.4 kHz @ 24 bit, 192 kHz @ 24 bit
-1-bit audio format: 2.8 MHz @ 1-bit, 5.6 MHz @ 1-bit,DSDIFF format (extension .dff), DSF (extension .dsf),WSD (extension .wsd)
-mp3 audio format(playback only): 44.1kHz/32kbps - 320kbps
Recording
Maximum approximately: 120 hours at 44.1 kHz/16 bit, 14.5 hours at 5.6 MHz/1- bit (for 80 Gbyte hard disk), Maximum continuous recording 6 hours
Number: Recognizes a maximum of projects four hundred projects of each format
Mark points: 100 points per project *No mark names
USB functionality: Connect to computer via USB 2.0, usable as FAT32 USB external drive
Project editing: Rename, Delete, Protect
General
Display: 160 x 104 pixel, LCD with backlight
Level meter: -54dBFS – 0dBFS (PC audio); -54dBSACD – +3dBSACD (1-Bit audio); L and R each provide 21/23-step LED + peak LED
Power supply: AC100 –240 V
Power consumption: 20 W
Dimensions/Weight: 18.9“(W) x 8.6“(D) x 1.7“(H):Including protrusions/6.17 lbs
Main Specifications
Frequency response: 10 Hz ... 20 kHz ± 1 dB@ Fs 44.1 kHz / 48 kHz, 10 Hz ... 40 kHz ± 1 dB@ Fs 88.2 kHz/96 kHz/176.4 kHz/ 192 kHz, 10 Hz ... 100 kHz (1-bit)
S/N: 103 dB (typical) @ IHF-A
THD+N: 0.005% (typical), 20 Hz ... 20 kHz
A/D conversion: 2.8224 MHz/5.6448 MHz(1-bit), 24bit (PCM)
D/A conversion: 2.8224 MHz/5.6448 MHz(1-bit), 24bit (PCM)
Line In L/R
XLR
-Connector: XLR-3-31 type (balanced)
-Input impedance: 22 k Ohms
-Nominal level: + 4 dBu (REC LEVEL=0dB)
-Maximum level: + 24 dBu
RCA
-Connector: RCA (Unbalanced)
-Input impedance: 50k Ohms
-Nominal level (– 12 dBFS – 12 dB-SACD):
–6 dBV (REC LEVEL = 0 dB)
-Maximum level: + 10 dBV
Line Out L/R
XLR
-Connector: XLR-3-32 type (balanced)
-Load impedance: 600 Ohms or greater
-Nominal level: – 4dBu
-Maximum level (0dBFS 0dB-SACD):
– 16 dBu (Nominal level= –12dBFS),
– 18 dBu (Nominal level= –14dBFS),
– 20 dBu (Nominal level= –16dBFS),
– 22 dBu (Nominal level= –18dBFS),
– 24 dBu (Nominal level= –20dBFS)
RCA
-Connector: RCA (Unbalanced)
-Load impedance: 47 k Ohms or greater/
-Nominal level (– 12 dBFS – 12 dB-SACD):
– 6 dBV (REC LEVEL=0dB)
-Maximum level (0 dBFS 0 dB-SACD): + 6dBV
Phones
-Connector: 1/4" stereo phone jack
-Load impedance: 16 Ohms or greater
-Maximum level: 170 mW + 170 mW @ 32 ohms
S/P Dif In/Out (coaxial)
-Connector: RCA pin
-Format: IEC60958
Word Clock In/Out
-Connector: BNC receptacle, 75 Ohms
USB
-Connector: Type B
-Format: USB 2.0 compliant,
-USB mass storage class
-Supported operating systems: Windows 2000,or later Mac OS X 10.3.9 or later
Included Items
AC power cable, Install CD (“AudioGate" audio file conversion application)
AudioGate ver,1.5 Operating Requirements
Windows
-Supported operating systems: Microsoft Windows XP Home Edition/Professional Edition Service Pack 1 or later, Microsoft Windows Vista
-Supported computers:
CPU: Intel Pentium III /1 GHz or better
RAM: 256 MB or more
A USB port that meets the operating requirements of Microsoft Windows XP/Vista
Macintosh
-Supported operating system: Mac OS X 10.3.9 or later
-Supported computers:
CPU: Apple G4/800 MHz or better, Intel Mac is supported
RAM: 256 MB or more
A USB port that meets the operating requirements of Mac OS X
Demo Project
All Most Blues
The Wind and the Wheat performed by Phil Keaggy
copyright Phil Keaggy 2006
http://www.philkeaggy.com/
*This product comes installed with the "ISC-MP3 BF532 d Korg" MP3 decoder which was developed by The Institute of Super Compression Technologies, Inc. (ISCT), Japan.
*”DSD” is a registered trademark.
*Logos, product names, and company names are their trademarks or registered trademarks.
Specifications subject to change without notice | TASCAM's award winning DR-60D is the new audio recording solution for on-set filmmakers and videographers using DSLR's. For years, filmmakersProSound Network Best of Show have been trying different methods for recording audio, using bulky recorders designed for music and trying to transform the inferior audio technology built-into DSLR's. Now TASCAM has designed an answer that pros and amateurs alike have been waiting for.
The DR-60D is a brand new 4-track solid-state recorder utilizing TASCAM's decades of experience. The recorder utilizes high-grade HDDA pre-amps, legendary AD converters, and a durable but lightweight structure and shape. This device will fit snuggly under any camera or into any rig, and record up to 96kHz/24-bit high quality audio straight to SD/SDHC media. Filmmakers have at their disposal two 1/4“-XLR Locking Combo MIC/LINE Inputs, 3.5mm Stereo MIC Input, Camera In, Camera Out, Line Out and Headphone Out. Both 1/4“-XLR Combo Inputs supply +48V Phantom Power and the 3.5mm Input supplies Plug-In Power for microphones requiring a bias voltage.
The DR-60D is incredibly easy to use, employing TASCAM's very popular user interface and external controls for every major operation. The body structure, soft-touch keys and dials are designed specifically to help eliminate handling noise. The multiple record modes include, 4-Channel Record, Auto Record and TASCAM's Dual Record "Safety Track" Mode make the DR-60D one of the most versatile recorders on the market.
- Record to SD/SDHC card (Up to 32GB)
- Simultaneously record up to 4 tracks
- Record Mode：MONO, STEREO, DUAL MONO, DUAL STEREO, 4-CHANNEL
- Recording format：44.1/48/96kHz 16/24bit (WAV/BWF)
- TASCAM original HDDA microphone preamps
- Recording levels can be adjusted independently for the 1/L, 2/R and 3-4 inputs
- Two XLR/TRS inputs support +4dBu line level input and phantom power (24 or 48VDC on XLRF)
- Plug-in power and high-output mic input supported on inputs 3-4
- CAMERA OUT connector for output from the DR-60D's mixer (adjustable gain)
- CAMERA IN connector for sound monitoring from the camera
- Independent adjustable LINE OUT and HEADPHONE jacks for high-quality sound output
- 50mW/ch headphone output
- Tripod mounting socket (bottom) and DSLR mounting screw attachment (top)
- Handles protect the screen and can be used to attach a shoulder strap
- Soft-Touch Rubber Keys for silent operation
- HOLD switch to prevent accidental operation
- QUICK button feature for easy access to various functions
- 128x64 pixel LCD with backlight
- USB 2.0 connection for high-speed transferring of files
- Mini USB cable included
- Operates on 4-AA batteries, an AC adapter (sold separately) or USB bus power
- Can extend battery life with BP-6AA battery pack (sold separately)
- Dedicated remote control jack for the wired RC-10 remote control or RC-3F footswitch (both sold separately)
- Internal mixer: PAN and LEVEL controls
- Low cut filter(40/80/120Hz)
- Limiter (1/L and 2/R can be selected for link-operation)
- Delay function for microphone distance adjustment (up to 150ms)
- M-S decode function
- Slate tone generator (AUTO/MANUAL)
- Selectable duration of slate tone from four positions (0.5/1/2/3 sec, when auto-generated)
- Selectable slate tone generation. 3 positions: OFF/HEAD/HEAD+TAIL, when auto-generated
- File name format can be set to use a user-defined word or date
- Dual-recording function allows two files to be recorded simultaneously at different levels
- Auto-record function can automatically start and stop recording at set level
- Pre-recording function allows the unit to record a 2 second sound buffer before recording is activated
- Self-timer function for solo recording
- New file starts recording automatically without interruption when maximum file size is reached
- Track incrementing function allows a recording to be split by creating a new file when desired
- Jump back and play function
- Equalizer function for playback, and level alignment function to enhance the perceived overall sound pressure
- Resume function to memorize the playback position before the unit is turned off
- MARK function up to 99 points per audio track
- DIVIDE function
SPECIFICATIONS
| Recording media |
SD card(64MB to 2GB), SDHC card(4GB to 32GB) |
| Recording format |
|
| WAV |
44.1/48/96kHz, 16/24bit |
| BWF |
44.1/48/96kHz, 16/24bit |
| Number of channels |
4channel (stereo x2) |
| Analog audio input |
|
| 1/L, 2/R connectors |
|
| Connector |
XLR-3-31 (1:GND, 2:HOT, 3:COLD)/6.3mm(1/4“)TRS standard jack |
| Set to "MIC / MIC+PHANTOM“ |
|
| Input impedance |
2k ohms |
| Phantom power |
48V +/-4V(10mA/CH) / 24V +/-4V(10mA/CH) |
| Maximum input level |
0dBu |
| Minimum input level |
-72dBu |
| MIC input gain |
TRIM MAX |
| LOW |
+11dB |
| MID |
+36dB |
| HIGH |
+52dB |
| Set to "LINE“ |
|
| Input impedance |
10k ohms or more |
| Standard input level |
+4dBu |
| Maximum input level |
+24dBu |
| 3-4 connector |
|
| Connector |
3.5mm (1/8“) stereo mini jack (this connector can be supplied plug-in power) |
| Input impedance |
10k ohms |
| Maximum input level |
+10dBV |
| Minimum input level |
-50dBV |
| MIC input gain |
TRIM MAX |
| LOW |
+3dB |
| HIGH |
+26dB |
| CAMERA IN connector |
|
| Connector |
3.5mm (1/8“) stereo mini jack |
| Input impedance |
10k ohms |
| Standard input level |
-10dBV |
| Maximum input level |
+6dBV |
| Analog audio output |
|
| CAMERA OUT connector |
|
| Connector |
3.5mm (1/8“) stereo mini jack |
| Output impedance |
200 ohms |
| Standard output level |
-50dBV |
| Maximum output level |
-30dBV |
| LINE OUT connector |
|
| Connector |
3.5mm (1/8“) stereo mini jack |
| Output impedance |
200 ohms |
| Standard output level |
-10dBV |
| Maximum output level |
+10dBV |
| PHONES connector |
|
| Connector |
3.5mm (1/8“) stereo mini jack |
| Maximum output level |
50mW + 50mW |
| USB |
|
| Connector |
Mini-B type |
| Format |
USB2.0 HIGH SPEED mass storage class |
| REMOTE |
|
| Connector |
2.5mm TRS jack |
| Power |
Four AA batteries(Alkaline or NI-MH),
USB bus power,
Dedicated AC adapter(TASCAM PS-P515U, sold separately),
Dedicated external battery pack(TASCAM BP-6AA, sold separately) |
| Power consumption |
5.4W |
| Continuous operation time |
2ch WAV, 44.1kHz, 16bit rec |
| DR-60D |
|
| Alkaline batteries (EVOLTA) |
About 2:30 min (Phantom on)
About 4:30 min (Phantom off) |
| NI-MH batteries (eneloop) |
About 3:15 min (Phantom on)
About 5:00 min (Phantom off) |
| NI-MH batteries (eneloop pro) |
About 3:45 min (Phantom on)
About 6:00 min (Phantom off) |
| DR-60D+BP-6AA |
|
| Alkaline batteries (EVOLTA) |
About 5:30 min (Phantom on)
About 10:30 min (Phantom off) |
| NI-MH batteries (eneloop) |
About 7:30 min (Phantom on)
About 12:00 min (Phantom off) |
| NI-MH batteries (eneloop pro) |
About 9:30 min (Phantom on)
About 14:30 min (Phantom off) |
| Dimensions |
133(W)×93.2(H)×78(D)mm (with the top adapter attached) |
| Weight |
510g (not including batteries) |
| Operating temperature |
0˚C to 40˚C |
| Standard accessories |
USB cable, warranty card, Owner's manual |
| Computer compatibility |
| Windows |
| OS |
Windows XP, Windows Vista, Windows 7, Windows 8 |
| CPU |
Pentium 300MHz or more |
| RAM |
128MB or more |
| USB |
recommended: USB2.0 |
| Macintosh |
| OS |
Mac OS X Jaguar (V10.2), Mac OS X Panther (V10.3), Mac OS X Tiger (V10.4),
Mac OS X Leopard (V10.5), Mac OS X Snow Leopard(V10.6.8), OS X Lion(V10.7),
OS X Mountain Lion(V10.8) |
| CPU |
Power PC, iMac, G3, G4 266MHz or more |
|
64MB or more |
| USB |
recommended: USB2.0 |
| Audio performance |
| Frequency response |
20-20kHz +0.5/-2dB(LINE IN or MIC IN to LINE OUT, Fs44.1k/48kHz, JEITA)
20-40kHz +0.5/-3dB(LINE IN or MIC IN to LINE OUT, Fs96kHz, JEITA) |
| Distortion |
0.02% or less(LINE IN or MIC IN to LINE OUT Fs44.1k/48k/96kHz, JEITA) |
| S/N ratio |
92dB or more(LINE IN or MIC IN to LINE OUT Fs44.1k/48k/96kHz, JEITA) |
| Equivalent input noise |
-120dBu or more |
Recording duration
The table below shows the maximum recording time on SD/SDHC cards of different capacities for different file formats for recording.
| File format(recording setting) |
SD/SDHC card capacity(hours:mintes) |
| 1GB |
2GB |
4GB |
8GB |
| WAV/BWF 16bit(STEREO) |
44.1kHz |
1:41 |
3:22 |
6:44 |
13:28 |
| 48kHz |
1:33 |
3:06 |
6:12 |
12:24 |
| 96kHz |
0:46 |
1:33 |
3:06 |
6:12 |
| WAV/BWF 24bit(STEREO) |
44.1kHz |
1:07 |
2:15 |
4:30 |
9:00 |
| 48kHz |
1:02 |
2:04 |
4:08 |
8:16 |
| 96kHz |
0:31 |
1:02 |
2:04 |
4:08 |
- The recording times shown above are estimates. They might differ depending on the SD/SDHC card in use.
- The recording times shown above are not continuous recording times, but rather they are the total possible recording times for the SD/SDHC card.
- If recorded in mono in WAV files, the maximum recording time will be double the figures above.
- For dual and 4-channel recording in WAV/BWF format, the recording times are about half those shown above.
| SPECIFICATIONS
[Recorder]
●Physical Tracks : 24 ●Simultaneous Recording Tracks : 8 ●Simultaneous Playback Tracks : 24 ●Recording Data Format : 44.1/48kHz, 16/24bit WAV ●Maximum Recordable Time : 200 minutes / GB (44.1kHz 16-bit, mono tracks) ●Projects : 1,000 ●Markers : 100 / Project ●Locator : Hours / Min. / Sec. / msec or Bars / Beats / Ticks ●File Editing : Divide, Trim ●Other Functions : Punch-In / Out (Manual, Automatic), Bounce, A-B Repeat, Undo / Redo, Metronome
[Audio interface]
●Input Channels : 8 ●Output Channels : 2 ●Quantization : 24bit ●Sampling Frequency : 44.1, 48, 88.2, 96kHz
[Mixer]
●Faders : 9 ●Level Meters : 4-Segment LED ●Track Parameters : 3-Band Equalizer, Pan (Balance), Effect Send x 2, Invert ●Stereo Links Track pairs : 1/2 to 23/24 selectable
[Effects]
●Algorithms : 9 (CLEAN, DISTORTION, ACO / BASS SIM, BASS, MIC, DUAL MIC, STEREO, 8 x COMP EQ, MASTERING) ●Types : 150 ●Modules : 7 for Insert, 2 for Send / Return ●Patches : 330 for Insert, 60 for Send / Return ●Tuner : Chromatic, Guitar, Bass, Open A/D/E/G, D modal
[Sampler]
●Playback Data Format: 44.1/48kHz, 16/24bit WAV ●Voices: 24 ●Editing Functions: Trim, Time-stretch
[Rhythm]
●Voices: 8 ●Sound Format: 16-bit Linear PCM ●Drum Kits : 10 ●Pads : 8 (velocity-sensitive) ●Precision : 48 PPQN ●Rhythm Patterns : 511/project ●Patterns : 511 (472 factory, 39 blank) / Project ●Beat : 1/4 - 8/4 ●Tempo : 40.0 - 250.0 BPM
[Hardware]
●Recording Media : SD Card (16MB-2GB), SDHC Card (4-32GB) ●A/D Conversion : 96kHz 24bit delta-sigma ADC ●D/A Conversion : 96kHz 24bit delta-sigma DAC ●Display : 128 x 64 pixel LCD (with backlight) ●Inputs : 8 x XLR-1/4''Phone Combo Jack / Input Impedance: (Balanced input) 1kΩ balanced, 2nd hot, (Unbalanced input) 50kΩ unbalanced, (Hi-Z Input) 470kΩ / Input Level: -50dBm to +4dBm continuously variable ●Built-in microphones : Omnidirectional condenser microphones Gain: -50dBm to +4dBm continuously variable ●Phantom Power Supply : 48V / 24V ●Master Output : 1/4“TRS Phone (balanced) / Output Impedance: 1kΩ / Rated Output Level: +4dBm ●Headphones Output : 1/4''Stereo Phone Jack, 20mW x 2 (at 32Ω load) ●USB : [B type (USB2.0 High-Speed compatible)] Audio Interface / Control Surface or Mass Storage Class operation [A type (USB2.0 High-Speed compatible)] USB Host capability ●Power Requirements : AC adaptor (DC5V/1A/center positive) or AA size (LR6) battery x6 ●Battery Life : 4.5 hours (with backlight on and phantom power off) ●Dimensions : 376(W) x 237.1(D) x 52.2(H) mm ●Weight : 1.3kg (without batteries)
*0dBm=0.775Vrms
R24 USB Audio Interface System Requirments
Windows® Windows® XP SP2 or later / Vista SP1 or later / 7
Intel® Pentium® 4 1.8GHz or better
1GB RAM or more
USB 2.0 compatible port
Intel® Mac OS X 10.4.11 or later / 10.5 / 10.6 / 10.7
Intel® Core Duo processor 1.83GHz or better
1GB RAM or more
USB 2.0 compatible port.
* USB hub is not supported.
* Intel® Chipset is recommended. | Recording Media SD/SDHC card (up to 32GB)
Built-in Mic MS stereo & 90-degree XY stereo
Maximum Sound Pressure Level 120dB SPL
Recording Format 《STEREO MODE》
PCM (Quantization : 16/24bit, Sampling Frequency : 44.1/48/96kHz),
MP3 (Bit Rate : 48 to 320kbps, Sampling Frequency : 44.1kHz)
《4CH MODE》
PCM (Quantization: 16/24bit, Sampling Frequency: 44.1/48kHz)
A/D Conversion 24bit, 128times oversampling
D/A Conversion 24bit, 128times oversampling
Signal Processing 32bit
Functions Lo-cut Filter, Compressor/Limiter, Auto Gain, Pre-Rec, Auto-Rec, Tuner,Metronome, Variable Speed Playback, Key Control, A-B Repeat,File Dividing, Normalize, MP3 Post-Encode, Marker, Surround Mixer
Display 128 x 64 pixel, backlit LCD
Input Gain 0 to +39dB
Mic / Line Input 1/8" stereo phone jack (Plug-in power supported)
Input impedance 2kΩ (Input level: 0 to -39dBm)
Phones / Line Output 1/8" stereo phone jack
Rated Output Level -10dBm
Output Load Impedance 10kΩ or more
Phones Output Level 20mW + 20mW into 32Ω load
Built-in Speaker 400mW 8Ω
USB Mini-B type, Mass Storage Class operation (USB2.0 High Speed compatible),
Audio Interface operation (16bit, 44.1kHz/48kHz)
Power Requirements AA/LR6 battery x 2, or AC adapter AD-17 (DC5V/1A/center positive)
Battery Life 20 hours (16bit/44.1kHz WAV recording)
Dimensions 67.6 (W) x 113.8 (D) x 42.7 (H) mm
Weight 130g (without batteries) | Uses a system of interchangeable input capsules that can be swapped out as easily as the lens of a camera
Includes detachable X/Y capsule (XYH-5) with extended signal capacity and shockmounted mics for reduced handling noise
Compatible with all Zoom input capsules
Four-track simultaneous recording
Large backlit LCD display
Records directly to SD and SDHC cards up to 32GB
Up to 24-bit/96kHz audio in BWF-compliant WAV or a variety of MP3 formats
Two mic/line inputs with XLR/TRS combo connectors, each with selectable phantom power and -20dB pad
Analog-style gain controls for each input
Protective "roll-bar" type covers prevent accidental movement of gain controls
Plug-in power (2.5 volts)
Built-in effects, including low-cut filtering, compression and limiting
Chromatic tuner and metronome
Auto-record, Pre-record and Backup-record functions mean that you'll never miss that perfect take
MS decoding
Multitrack to stereo internal mixdown
Normalize, Divide and Trim editing
Voice memo and up to 99 marks per recording
A/B loop playback
Variable playback speed and variable pitch without affecting playback speed
Multichannel and stereo USB audio interface for PC/Mac/iPad with loop back function
Mountable to DSLR or camcorder with optional HS-01 Hot Shoe Mount adapter
Uses two standard AA alkaline or NiMH rechargeable batteries
Over 15 hours of operation with alkaline batteries
GENERAL
Recording media:
SD card: 16MB to 2GB , SDHC card: 4GB to 32GB
Display:
Backlit LCD (128 x 64 pixels)
INPUTS
INPUTS L/R [XYH-5 X/Y mic]:
Mic type: Unidirectional
Sensitivity: -45 dB, 1 kHz at 1 Pa
Input gain: -∞ to 52 dB
Max sound pressure input: 140 dB SPL
MIC/LINE IN :
Connector: 1/8" stereo mini jack
Input gain: - ∞ to 52 dB
Input impedance: 2 k Ω or more
Plug-in power: 2.5V supported
Backup recording: -12dB lower than set L/R input gain
INPUTS 1/2:
Connectors: XLR / TRS combo jacks
(XLR: Pin 2 hot / TRS: Tip hot)
Input gain (PAD OFF): -∞ to 55.0 dB
Input gain (PAD ON): -∞ to 35.0 dB
Input impedance: 1.8 k Ω or more
Max input level: +22 dBu (PAD ON)
Phantom power: +12V /+24V /+48V
Equivalent Input Noise (EIN): -120 dBu or less
OUTPUTS
LINE OUT :
Connector: 1/8" stereo mini jack
Rated output level: -10 dBm
Output load impedance: 10k Ω or more
PHONE OUT :
Connector: 1/8" stereo mini jack
Output Level: 20 W +20 W into 32 Ω load
Built-in speaker:
400mw 8 Ω mono
RECORDING FORMATS
STEREO MODE:
WAV (BWF-compliant)
Sampling frequency: 44.1/48/96 kHz
Bit rate: 16/24 (Stereo)
Maximum simultaneous recording tracks: 2
MP3
Sampling frequency: 44.1kHz
Bit rate: 48/56/64/80/96/112/32/160/192/224/256/320kbps
MULTITRACK MODE:
WAV (BWF-compliant)
Sampling frequency: 44.1/48 kHz
Bit rate: 16/24 (Mono/Stereo)
Maximum simultaneous recording tracks: 6 (L/R + INPUT 1/2 + L/R backup)
USB
Mass Storage Class operation:
Class: USB 2.0 High Speed
Audio Interface operation: Multitrack mode:
Class: USB 2.0 High Speed
Sampling frequency: 44.1/48kHz
Bit rate: 16/24 bit
Inputs / Outputs: 4 / 2
Audio Interface operation: Stereo mode:
Class: USB 2.0 Full Speed
Sampling frequency: 44.1/48kHz
Bit rate: 16 bit
Inputs / Outputs: 2 / 2
USB bus powered operation possible
(iPad operation supported in Stereo mode only)
POWER REQUIREMENTS
AA size (LR6) battery x 2
AC adapter: AD-17 (DC5V/1A/USB-type) (optional)
USB bus power |
Reviews
There are no reviews yet.