B&W ZZ13161 Mid Bass Woofer Spare part for DM603S3

Suitable for DM 603 S3

Nominal Specifications

    * Nominal Diameter 6“, 160 mm
    * Overall Diameter 7.34/6.37“, 186.5/162 mm
    * Bolt Circle Diameter 6.77“, 172 mm
    * Baffle Cutout Diameter 5.78“, 147 mm
    * Depth 3.43“, 87.2 mm
    * Flange and Gasket Thickness 0.29“, 7.5 mm


Electrical Specifications

    * Minimum Impedance 6.6 Ohm
    * Nominal Impedance 8 Ohm
    * Nominal Power Handling*** 120 W
    * Maximum Power Handling**** 240 W
    * Sensitivity (1W/1m) 95 dB
    * Frequency Range 100 - 10,000 Hz
    * Voice Coil Diameter 1.5“, 37 mm
    * Winding Material Aluminium
    * Former Material Kapton
    * Winding Depth 0.47“, 12 mm
    * Magnetic Gap Depth 0.24“, 6 mm
    * Flux Density 1.4 T


THIELE & Small Parameters

    * Resonant Frequency (fs) 100 Hz
    * DC Resistance (Re) 5.8 Ohm
    * Coil Inductance (Le) 0.35 mH
    * Mechanical Q (Qms) 6.36
    * Electromagnetic Q (Qes) 0.36
    * Total Q (Qts) 0.34
    * Compliance Equivalent Volume (Vas) 0.18 ft³, 5.04 dm³
    * Mechanical Compliance of Suspension (Cms) 0.27 mm/N
    * Rms 1.03 Kg/s
    * BL Product (BL) 10.3 N/A
    * Diaphragm Mass inc. Airload (Mms) 11.7 grams
    * Maximum Linear Excursion (Xmax)* 5 mm
    * Xdamage** 11.6 mm
    * Surface Area of Cone (Sd) 17.67“², 114 cm²
    * Diaphragm mass (Mmd) 11 g
    * Eta Zero 0.93 %


Notes

    * *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
    * **Maximum excursion before permanent damage
    * ***2 Hours Test According to AES 2-1984 Rev. 2003
    * ****Maximum power is defined as 3dB greater than nominal power

• 93 dB Sensitivity 1 W / 1 m
• 130 W Power Handling
• 1.5" Sandwich Voice Coil
• Double treated Cone for Water Protection
• Neodymium Magnet System
• Twin Aluminum demodulating Rings for ultra low Distortion
• Optimal for compact 2- or 3-way Systems

Woofer 6" 300w program/94dB/W/m-70-
5000Hz.

300 W continuous program power capacity
38 mm (1.5 in) aluminium voice coil
70 - 5000 Hz response
94 dB sensitivity

Specification
Nominal Diameter 170 (6.5) mm (in)
Nominal Impedance (1) 8 Ohm
Minimum Impedence 6.6 Ohm
Nominal Power Handling (2) 150 W
Continuous Power Handling (3) 300 W
Sensitivity (1W/1m) (4) 94 dB
Frequency Range 70 - 5000 Hz
Voice Coil Diameter 38 (1.5) mm (in)
Winding Material Copper
Former Material Glass Fibre
Winding Depth 12.5 (1/2) mm (in)
Magnetic Gap Depth 6 (0.25) mm (in)
Flux Density 1.4 T

Thiele & Small Parameters
Fs 75 Hz
Re 5.4 Ohm
Qes 0.31
Qms 11.7
Qts 0.3
Vas 8 (0.28) dm3 (ft3)
Sd 132 (20.5) cm2 (in2)
Eta Zero 1 %
Xmax +/- 6 mm
Xvar +/- 7.5 mm
Mms 14 g
Bl 10.8 Txm
Le 0.6 mH

Mounting and Shipping Info
Overall Diameter 187 mm (7.4 in)
Bolt Circle Diameter 172 mm (6.7 in)
Baffle Cutout Diameter 145 mm (5.7 in)
Depth 82 mm (3.2 in)
Flange and Gasket Thickness 9 mm (0.35 in)
Net Weight 2.2 kg (4.8 lb)
Shipping Weight (4 units) 10.1 kg (22.2 lb)
Shipping Box (4 units) 405x225x210 mm
(15.9x8.8x8.3 in)
1For different impedances, please ask.
22 hours test made with continuous pink noise signal (6 dB crest factor).
Power calculated on rated minimum impedance.
3Power on Continuous Program is defined as 3 dB greater than the
Nominal rating.
4Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.

• Nominal Basket Diameter 6.5“, 165 mm
• Nominal Impedance 8 ohms
• Power Rating Watts 100 W / Music Program 200 W
• Resonance 118 Hz
• Usable Frequency Range 85 Hz - 6 kHz
• Sensitivity 93.6
• Magnet Weight 20 oz.
• Gap Height 0.25“, 6.35 mm
• Voice Coil Diameter 1.5“, 38.1 mm

• Resonant Frequency (fs) 118 Hz
• DC Resistance (Re) 7.2
• Coil Inductance (Le) 0.19 mH
• Mechanical Q (Qms) 5.68
• Electromagnetic Q (Qes) 0.60
• Total Q (Qts) 0.54
• Compliance Equivalent Volume (Vas) 5.8 liters / 0.2 cu. ft.
• Peak Diaphragm Displacement Volume (Vd) 44cc
• Mechanical Compliance of Suspension (Cms) 0.26 mm/N
• BL Product (BL) 8.0 T-M
• Diaphragm Mass inc. Airload (Mms) 7 grams
• Efficiency Bandwidth Product (EBP) 197 Maximum Linear Excursion (Xmax) 3.5 mm
• Surface Area of Cone (Sd) 126.7 cm²
• Maximum Mechanical Limit (Xlim) 4.0 mm

• Recommended Enclosure Volume Sealed 2.8-5.7 liters / 0.1-0.2 cu. ft. Vented 3.4-15.6 liters / 0.12-0.55 cu. ft.
• Overall Diameter 6.59“, 167.4 mm
• Baffle Hole Diameter 5.69“, 144.5 mm
• Front Sealing Gasket fitted as standard
• Rear Sealing Gasket fitted as standard
• Mounting Holes Diameter 0.23“, 5.7 mm
• Mounting Holes B.C.D. 6.06“, 154 mm
• Depth 2.8“, 71 mm

• Copper voice coil
• Polyimide former
• Ferrite magnet
• Vented and extended core
• Pressed steel basket
• Paper Cone
• Cloth cone edge
• Solid composition paper dust cap

• 6.5-inch neodymium magnet mid-range driver with 1.75" voice coil, providing 150Wrms (AES) continuous power handling
• Suitable for line array applications, utilising a space efficient chassis profile
• FEA optimised flux distribution in the magnet assembly provides low harmonic distortion
• M-roll surround provides progressive excursion control, generating a smooth frequency response
• Intelligent heat management in both chassis and magnet assembly design offers reduced thermal distortion