| Content | Adam Hall 7120 Επαγγελματικό Μικροφωνικό Καλώδιο Τιμή/Μέτρο
Exterior diameter
6.8 mm +/- 0.2 mm
Composition of conductor
28 x 0.15 mm, bare copper, OFC
Number of inner conductors
2
Shielding
tin plated copper spiral shielding 80 x 0.10 mm with additional AL fleece
Conductor resistance
37 ohm/km
Capacitance Cond./Cond.
80 pF/m
Capacitance Cond./Shield.
145 pF/m
insulating resistance
> 1 G Ohm(s)
Operating Temperature
- 20 - 70 °C
|
Conductor drains Ø mm: OFC 28 x 0,10
Conductor insulation: PE red+blue
Conductor insulation Ø in mm: 1,5
Filler material: paper + cotton yarn
1st shield: OFC twisted 83 x 0,12
2nd shield: -
Outer isolation: PVC black, blue, red, yellow, green
Outer isolation Ø in mm: 6
Conductor resistance: 80 Ohm/Km
Shield resistance: 25 Ohm/Km
Capacity Inner conductor: 45 pF/m
Cap. Inner conduct. Shield/Inner conduct.: 112 pF/m
Working temperature: -20~60 °C (min. / max.)
Working Voltage overflash: 30V
Nom Impedance: 110 Ohm |
- Durable thin PVC jacket
- Reduced 3.2 mm outer diameter
- 0.18 mm² tinned copper conductors
- Extra flexible LLDPE insulation for high tensile strength and impact resistance
- 100% aluminum foil shield plus drain wire
Purpose-designed for audio installations and rack wiring, this balanced cable features a reduced diameter and a thin durable PVC jacket. The 0.18 mm² tinned copper conductors are insulated with LLDPE (linear low density polyethylene) for extra flexibility, high tensile strength and impact resistance. The cable is fully shielded with aluminum foil plus drain wire.
Product type
Bulk Cable
Type
Microphone cable
Colour
Black
Overall diameter
3.2 mm +/- 0.2 mm
Center conductor cross section
0.18 mm²
Center conductor material
Copper, tin-plated
Center conductor construction
16 x 0.12 mm
Number of internal conductors
2
Shield material
Aluminium foil
Line resistance
130 Ohm(s)
Capacitance
73 pF/m
Weight
0,01975 kg
|
- OFC fine stranding and large cross section makes this cable perfect for high quality signal transmission
- Excelent shielding due to double spiral shielding and semiconductor
- High pressure resistance due to stabilizing element and fine and high precison stranding
- Well suited for most demanding mobile, outdoor and long distance use
Product type
Bulk Cable
Type
Microphone cable
Colour
Black
Overall diameter
6,8 mm +/- 0.2 mm
Center conductor cross section
0.38 mm²
Center conductor material
Copper, OFC
Center conductor construction
48 x 0.10 mm
Number of internal conductors
2
Shield
Double spiral shielding
Line surge impedance
110 Ohm(s)
Line resistance
50 Ohm(s)
Capacitance
100 pF/m
Jacket material
PVC
Weight
0,067 kg
| The 7119 is a professional microphone cable for balanced, low-impedance applications. It sports a pair of high strand count oxygen-free copper conductors with a cross section area of 0.30 mm² that are twisted for excellent common mode rejection. The conductors are insulated with 1.5 mm PE for very low capacitance. A braided shield of tinned copper provides efficient EMI and RFI protection for clear, quiet signal transfer. The tough, hard wearing PVC jacket is highly flexible and abrasion resistant in any live, studio and home recording environment.
Overall diameter
6,5 mm +/- 0,2 mm
Center conductor cross section
0.3 mm²
Center conductor material
Copper bare, OFC
Center conductor construction
38 x 0,10 mm mm
Number of internal conductors
2
Shield material
Copper tin-plated
Line resistance
53 Ohm(s)
|
Adam Hall by Procab - power and audio cable Ø 14 mm
The PAC50 is a high quality signal and power cable in one jacket. This kind of cable is designed to fulfill all demands when using active loudspeakers. The cable consists of a power cable and a balanced signal cable. A general outer jacket with an O.D. of 14 mm and made of flexible PVC protects each inner cable against abrasion. The inner power cable contains 3 conductors with a section of 1.0 mm², protected by a PVC jacket with an O.D of 7 mm.
The signal section is balanced and contains two twisted inner conductors of 0.125 mm² with an excellent shielding to prevent any influence of hum, noise, radio interference and magnetic fields.
The signal section is also protected by an outer jacket of PVC with an O.D. of 3.5 mm. The PAC50 cable finds its application in mobile systems where power and signal are desired to be in one cable (active speaker systems).
TECHNICAL DATA: - Art No.: KCPAC50
- Type of cable: Signal cable
- Containing: Power cable & audio cable
- Cover: cotton paper
- Outer jacket: Flexible PVC
- Outer jacket color: Black
- Outer jacket dimensions: Ø 14 mm
- Printing color: white
- Printing text: Procab PAC50
- Type of packing: wooden reel for 100 meter
MECHANICAL DATA: - Temperature range fixed installation:
- Fixed installation: -40° C to +80° C
- Flexible installation: -25° C to +70° C
- Bending radius :
- Fixed installation: 8 x outer diameter
- Flexible installation: 10 x outer diameter
AUDIO CABLE: - Type of cable: Signal cable
- Inner conductor: 2 x TC 7 x 0.15 mm
- Inner conductor section: 2 x 0.125 mm²
- Conductor twisting: Yes
- Isolation: PE , Ø 1,5 mm
- Shielding: TC 32 x 0.12 mm, spiral
- Shielding %: 100%
- Outer jacket: Flexible PVC
- Outer jacket color: grey
- Outer jacket dimensions: Ø 3,5 mm
- Lead resistance: 13.75 ohm - 100 meter
- Cable cross-talk: Min. 73.3 dB - 100 meter
- Capacitance lead to lead: 54 pF - meter 1 kHz
- Capacitance lead to Shielding: 98 pF - meter 1 kHz
POWER CABLE: - Type of cable: Power cable
- Inner conductor: 3 x BC 58 x 0,15 mm
- Inner conductor section: 3 x 1 mm²
- Inner conductor color: green 6 yellow - blue - brown
- Outer jacket: Flexible PVC
- Outer jacket color: black
- Outer jacket dimensions: Ø 7 mm
- Lead resistance: 1.35 ohm - 100 meter
- Max. operation voltage: 450 Volt
- Max current: 10 amp
- Approval: CE
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.