| Stock | Μόνο 5 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)
| Σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)
| Σε απόθεμα
| Μόνο 4 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)
| Σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)
| Διαθέσιμο κατόπιν παραγγελίας
|
| Content | The ah PAD series is designed to isolate studio monitors acoustically, i.e., avoid disturbing resonances with the surface on which they stand, which results in a significantly improved sound. The two-component design results in three possible combinations (horizontal placement + two different angles.
Product type
Other Studio and Recording Equipment
Material
High density acoustic foam
Colour
charcoal
Setup
2-layer
Foam density
38 kg/m
Width
170 mm
Height
40 mm
Depth
300 mm
Weight
0,12 kg | The Gravity studio monitor stand GSP 3202 VARI-TILT® features a heavy, triangular base made of cast iron and a 25x25 cm steel tray with isolating foam rests. It is tilt-adjustable by 10° and height-adjustable from 90 to 150 cm for optimum speaker positioning. The stand is supplied with a set of spikes. Mounted on the large, integrated rubber feet, these ensure effective coupling to the floor.
Product type
Stands and Tripods
Tubing surface
Powder coated
Height adjustment
Clamp with safety pin
Base edge length
292.5 mm
Tubing diameter
42 mm / 35 mm
Centic load capacity (without spikes)
30 kg
Centic load capacity (with spikes)
10 kg
Interchangeable rings
1 x 15 mm, 1 x 20 mm, 1 x 30 mm
Black ring pack included
Yes
Additional information
Including acoustic isolation spikes
| A mix\'s sound and feel is heavily influenced by having your monitors placed in the proper position. In a home studio, however, where space is at a premium, it\'s not always possible to put your studio monitors right next to a table using suitable stands. The Gravity SP 3102 is the solution to this problem. The flexible, powder-coated steel stand squeezes onto pretty much any desk. The edge of the solid base is only 25 cm in length. Monitor boxes weighing up to 25 kg can be flexibly positioned at the height you want, and EVA padding and tilting protection make it possible to vertically angle them by up to 15° and horizontally rotate them 360°, meaning you can always find the perfect position for your studio monitors. The colourful G-rings make a clear design statement and can be swapped out in mere seconds. An additional black ring set is also supplied with the product.
- Infinitely variable height adjustment
- Tilt angle up to +/- 15°
- 360° rotatable
- EVA padded bearing surface
- Anti-tip for the speaker
Product type
Stands and Tripods
Type
Speaker Stands
Tubing material
Steel
Tubing colour
Black
Tubing surface
Powder-coated
Min height
263 mm
Max height
358 mm
Tilt angle
+/- 15 °
Bearing surface
240 x 250 mm , EVA padded
Height adjustment
Adjusting screw
Base material
Steel
Base edge length
250 mm
Max. load
25 kg
Interchangeable rings
1 x 20 mm , 1 x 30 mm
Black ring pack included
Yes
Weight
4,1 kg | Isolation Pad for Studio Monitors 265 x 330 mm
The ah PAD series is designed to isolate studio monitors acoustically, i.e., avoid disturbing resonances with the surface on which they stand, which results in a significantly improved sound. The two-component design results in three possible combinations (horizontal placement + two different angles.
Product type
Other Studio and Recording Equipment
Material
High density acoustic foam
Colour
charcoal
Setup
2-layer
Foam density
38 kg/m
Width
265 mm
Height
40 mm
Depth
330 mm
Weight
0,22 kg |
| Τύπος προϊόντος |
Βάσεις και τρίποδα |
| Τύπος |
Βάσεις ηχείων |
| Υλικό |
Ατσάλι |
| Χρώμα |
Μαύρο |
| Ελάχιστο ύψος |
150 mm |
| Μέγιστο ύψος |
250 mm |
| Επιφάνεια |
160 x 180 mm, Με επένδυση EVA |
| Ρύθμιση ύψους |
Βίδα ρύθμισης |
| Υλικό βάσης |
Ατσάλι |
| Μήκος άκρου βάσης |
220 x 205 mm |
| Μέγιστο φορτίο |
15 kg |
| Εναλλάξιμοι δακτύλιοι |
1 x 30 mm |
| Μαύρο πακέτο δακτυλίων περιλαμβάνεται |
Ναι |
| Βάρος |
4,4 kg |
|
- Rubber support surface for a stable stand of the monitors
- Robust construction; Tilt angle ± 10 degrees
- Variable table mounting (max. 55mm)
- Height adjustable in 4 steps from 235mm to 280mm
- Monitor support surface: 220mm x 180mm
- Maximum load: 15kg
- Weight: 1,45kg
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.