Content |
AFTERMARKET Mackie M44ti Tweeter Diaphragm for Early Model SRM-450 Speaker
This is an aftermarket diaphragm that fits many makes and models. Our diaphragm is rated for the same amount of power and sounds just like the original diaphragm
Voice coil diameter 45mm
Outside diameter of main diaphragm body 72mm
Distance between contact terminals 75mm
Overall width at widest point 96mm
Width of contact lugs 16mm
Impedance: 8 ohms.
DCR is 6.3 ohms.
Replacement diaphragm for RCF N450 compression driver. This is what you need to repair a blown compression driver.
Also known as Mackie/RCF replacement diaphragm EAW : 15410081 RCF: M81, M-81, N450, N-450, DM81, DM-81, S500, Mackie: M44ti. Will fit some Mackie speakers that used RCF components, please check the photo and voice coil size against the original.
*This diaphragm will only fit some of the early models of the SRM-450, they do NOT have the push terminals that some of the later models used. Please make sure your diaphragm looks like our pictures and has the same dimensions as we describe.
No soldering needed and the diaphragm is self centering for an easy install. Any questions, just let us know.
|
-
JBL Original Speaker Diaphragm Part # D8R2418-1
-
Voice coil: 1-3/4" (45mm)
-
Diameter: 3" (75mm)
-
Length: 5-1/8" (130mm)
-
Impedance: 8 ohm, DCR: 4 ohm
-
Titanium dome with copper voice coil on Kapton former.
-
Fits JBL Driver and Cabinet Models:
JBL: 2418, JBL 2418H, JBL 2418H-1, 3622N, 3632M-HF, 3632M-HF-T, 3677S, 3722HF, 3722N-HF, 4425LR, AC2212/00-WH, AC2215/00-WH, CAB-55, CAB55, CAB 55, EON-15, EON15, EON 15, EON 15P-1/230, EON POWER15, EON-15-G2, EON15-G2, EON 15-G2, EON-15P, EON15P, EON 15P, MR-902, MR902, MR 902, ,MR-905, MR905, MR 905, MR-922, MR922, MR 922, MR-925, MR925, MR 925, MR-926, MR926, MR 926, MR-935, MR935, MR 935, MR-938, MR938, MR 938, MS-112-WH, MS112-WH, MS 112-WH, MS-115-WH, MS115-WH, MS 115-WH, and many more!
Please check your model before ordering to make sure you are getting the correct diaphragm.
|
- Voice coil: 3.93″ (100mm)
- Diameter: 5″ (127mm)
- Impedance: 8 ohm, DCR: 4.7 ohm
- Titanium ribbed dome with edge wound voice coil on Nomex former
- We sell an aftermarket version of this diaphragm. See our aftermarket diaphragms page for details.
- Please check your model before ordering to make sure you are getting the correct diaphragm.
- See the “Fits Models” tab for all applicable cabinet and driver numbers.
|
Ανταλλακτικό διάφραγμα για RX-22 driver, που φοράνε τα ηχεία Impulse 1012 8 Ohm, Impulse 1012 4 Ohm, Impulse 1012P,Impulse 1015 8 Ohm, Impulse 1015 4 Ohm, DJS4, DJS 5, SP2X, SP3X,SP4X, SP5X, SP5XL, SP6X, SP112MX, SP115MX Impulse 1015P, QW 3, QW 3F, TLS 6X, SP2, SP3, SP4, SP5, SP6, SP12M, SP15M, SP 8
-
Peavey Factory Speaker RX22, 22XT, 22XT+ Original Diaphragm Part # 00452400
-
NEW! Now used for ALL 22 series drivers: RX22, 22A, 22XT, 22XT+
-
Voice coil: 2" (50mm)
-
Diameter: 4-1/2" (115mm)
-
Impedance: 8 ohm
-
Titanium dome with edge wound copper clad aluminum voice coil on high temp composite bobbin
-
Installation instructions, Ferro Fluid, and new mounting bolts included on new diaphragms starting mid 2015
Please check your model before ordering to make sure you are getting the correct diaphragm.
|
Genuine Celestion CDX1 Driver uses T5503/R Diaphragm in 1415, 1425, 1430. 8 ohms
This is also the replacement diaphragm for the HF Driver in the QSC HPR122i, HPR153i and HPR153F speaker box. Also fits Yorkville NX300and Yorkville NX55P, NX300, YX10, YX12, YX12M, YX15, YX15P, and YX215 cabs.
|
JBL D16R2408 Genuine Diaphragm for 2408H 16 Ohm
This genuine JBL replacement diaphragm is compatible with the 2408H horn driver. JBL part number D16R2408.
This driver has been used in many JBL cabinets.
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.