ART PHANTOM II TWO CHANNEL 12V/48 PHANTOM POWER

Phantom II - Two Channel 12V/48 Phantom Power Overview

Condenser microphones usually specify different requirements for their phantom power.
These ratings can range from 48 Volts all the way down to 9 Volts. Fortunately, there?s
a certain amount of flexibility with matching Phantom Power voltage to your mic. A rough
rule-of-thumb would be ?more is better.?
For example, a 24-volt condenser mic usually works perfectly with a 48 Volt Phantom
Power Suppy. Some mics rated at as little as 9 Volts can operate on voltages up to 48
Volts (check with the manufacturer first). Conversely, a mic will generally perform best driven
by not less than its rated voltage. So, for a 48 Volt mic, you would get best performance
with 48 Volts of Phantom Power. For all the above, check out the Phantom II.
 
Phantom II - Two Channel 12V/48 Phantom Power Specifications:

Input Connectors 2 x XLR female
Output Connectors 2 x XLR male
Adapter 12V DC
Battery 2 x 9V
Power Two 9V batteries (included) or an AC adapter.
Dimensions 5.625x1.75x3.625 inches (144mm x 45mm x 92mm)
Weight 1.5lb (680g)
 

XLR phantom power adapter για τα micro mics type L

• Aντίσταση : 200 Ohm
• Τερματισμένη Αντίσταση : 1000 Ohm
• Τάση Εξόδου : 2 V
• Τροφοδοσία phantom : 12 - 48 V 1x Typ IEC LR 06
• Κατανάλωση : 2,2 mA
• Μέγιστος χρόνος λειτουργίας μπαταρίας : 150 h
• Διαστάσεις : διάμετρος 22 x  μήκος 94 mm 
• Βάρος : 45 g
• Gain : 0 dB
  
  
  
  

Τροφοδοτικό χειρός για τις κάψες ME-62, ME-64, ME-65, ME-66 & ME-67.

• Αντίσταση : 200 Ohm, symm.
• Τερματισμένη αντίσταση : 1000 Ohm
• Τάση Εξόδου : 2 V (1 kHz)
• Τροφοδοσία  : 12 - 48 V
• Κατανάλωση : 2,2 mA
• Διαστάσεις : διάμετρος 22 x  μήκος 52 mm (netto)
• Gain : 0 dB
  

  The K6P powering module is at the heart of Sennheiser's professional modular 
  condenser microphone system. It is similar to the K6 powering module but is 
  powered by 12 - 48 V phantom power only, for use where battery power is not 
  required (e.g. permanent installations). The K6P can be combined with various
  microphone heads to produce microphones with a variety of pick-up patterns. 
  Matt black, anodised, scratch-resistant finish. 
  Profile 
  Powering module for phantom powering with switch-able roll-off filter suitable for 
  ME 62 - ME 67 microphone heads and -60 versions of MKE microphones, 
  transmission factor 0 dB at 1 kHz, nominal impedance 200 Ohm, min. terminating 
  impedance 1 kOhm, max. output voltage 2 V (at 1 kHz), phantom powering 12 V - 48 V,
  supply current 2.2 mA, dimensions in mm: ? 22 x 118, resultant length 52 mm, 
  weight approx. 30 g.

  Features 
  Switchable bass roll-off filter protects against rumble, handling, pop and wind noise 
  On/off switch 
  High output, low noise 
  Transformerless balanced output on 3-pin XLR connector 
  Delivery Includes 
  1 K6P powering module 
  1 MZQ 200 microphone clamp 
  1 protective carrying case

  Technical Data 
  Nominal impedance  200 Ohm, symm.  
  Min. terminating impedance  1000 Ohm  
  Output voltage  2 V (1 kHz)  
  Power supply  Phantom 12 - 48 V  
  Current consumption  2,2 mA  
  Dimensions  d 22 x 52 mm (netto)  
  Gain  0 dB 

  
  

The S-phantom gives you an in the field, on location solution for powering
your condenser microphones that need 48 volt power
 
FEATURES:

2 Channel 48 Volt phantom power supply
2 Balanced XLR mic inputs
2 Balanced XLR and 1/4? mic outputs
AC adapter included