Content | TA00084 100 V Line Transformer 20W/10W/5W 4Ω
The TA00084 are 100 V line transformer, designed for impedance matching between loudspeakers and amplifiers.
They are used for converting low impedance speakers allowing them to be used in 100V PA installations where long cableruns can be used.
The transformers have an over-dimensioned core, which limits saturation to a minimum and gives remarkable improvement of the sound reproduction quality, especially in the low frequencies.
There are several power tappings available for 100 V, and depending of the transformer thatʼs used, the output impedance can also be selected.
- Model Name: TA00084
- Power Taps: 20 W / 10 W / 5 W
- Output Impedance: 4 ohms
- Dimensions (W x H x D): 43 x 35 x 35 mm
|
Κονσόλα ανακοινώσεων με πλήκτρα επιλογής μεμονωμένων ή ομάδων μεγαφωνικών ζωνών.
Specification |
| Power Requirement | 24 V DC (12-30 V DC), (Supplied from VM-2120/VM-2240 Amplifier or local power suppy.) | Distortion | Less than 1% | Frequency Response | 100 - 10,000 Hz | Distortion | Less than 1% | Signal-to-Noise Ratio | More than 60 dB | Audio Output | 0 dB*1, 600 Ω, balanced | Microphone | Unidirectional electret condenser microphone, gooseneck type. | Speaker Zone Control | Zones 1-5 (Zones 1-10 with 2 stacked amplifiers) Groups 1-2, and All-Zone Broadcast | Emergency Broadcast | Activation of Emergency Broadcast (pre-recorded announcement*2 or live microphone announcement) by Emergency Switch | Voice Announcement Board Control | Activation of 5 messages*2 | Number of Connectable Units | Up to 4 | Communication System | RS-485 | Volume Control | Microphone volume control | Connection Cable and Connector Category | 5 STP cable, RJ45 connector | Communication Distance | 800 m maximum in total | Finish | ABS resin | Dimensions | 190 (W) × 75.7 (H) × 21.5 (D) mm (Gooseneck microphone excluded) | | *1 0 dB = 1 V
*2 An optional EV-200 Board must be mounted in the VM-2120 or VM-2240 Amplifier. |
|
Συσκευή επέκτασης AC εξόδων για το PD-659.
|
- SYSTEM POWER CONTROL
It controls the power of the rack system over all working together with the PD-659.
- AC OUTLET TERMINAL
To make the units using AC work, it has an AC outlet terminal for your convenience. AC switched group turn on and off repeatedly every 2 seconds.
| | | | |
PD- 658
|
AC Outlet
|
Switched 2000W ⅹ3
|
Operation Temperature
|
-10℃~+40℃
|
Power Source
|
100-120VAC or 220-240VAC; 50/60Hz
(Supplied AC mains transformer depends on country requirements)
|
Power Consumption
|
10W
|
Weight(SET)
|
4.6Kg/10.1 Ib
|
Dimension(SET)
|
482(W) x 88(H) x 380(D)mm/19(W) x 3.5(H) x 15(D)in
|
| | |
|
Rack system AC/DC power control unit. Σταθεροποιημένη έξοδο DC output με προστασία, ΑC εξόδους: unswitched 1 Group, switched 3 Group, DC εξόδους DC 24V, 5 A, Οθόνη με ένδειξη σε volt ΑC, DC. Διαστάσεις (WxHxD): 482X88X380mm
|
- SYSTEM POWER CONTROL
You can control the power of your system by using this model.
- AC AND DC POWER SUPPLY
You can distribute AC and DC power through the AC outlet and DC terminals on the rear panel.
- USE OF EMERGENCY POWER SUPPLY
For emergency equipment power supply, an extra DC terminal is provided.
- REMOTE CONTROL
You can control the system power by remote control function even though the power switch on front is off.
- AC AND DC VOLT METER
This model uses digital volt meter displays of AC and DC.
- OPERATING MODE DISPLAY
You can easily check the operating mode by LEDs, AC or DC operating and emergency power.
| | | | |
PD-659
|
AC Outlet
|
Switched 2000W ⅹ3
|
Unswitched 700W ⅹ1
|
Remote Control
|
1
|
DC Power Output
|
DC 24V 5A
|
Operation Temperature
|
-10℃~+40℃
|
Power Source
|
100-120VAC or 220-240VAC; 50/60Hz
(Supplied ACmains transformer depends on country requirements)
|
Power Consumption
|
190W
|
Weight(SET)
|
6.2Kg/13.6Ib
|
Dimension(SET)
|
482(W) x 88(H) x 380(D)mm/19(W) x 3.5(H) x 15(D)in
|
※ Specifications and design subject to change without notice.
|
| | |
|
The AT series high quality attenuators features 5 attenuation settings ,,OFF' -18dB,-12db,-6dB,-0dB. An input range from 0.5W to 60W (model dependent), and push-in connectors. Push-in connector allows quick terminal cable connection. Stylishly finished, the AT Series will suit any décor. |
Αυτόματη φόρτιση, έλεγχος συνεχόμενου ρεύματος. Ενταση φόρτισης συνεχόμενου ρεύματος 3 Α DC. Τάση φόρτισης συνεχόμενου ρεύματος 27,3 VDC max. Oθόνη με αμπερόμετρο και βολτόμετρο. Κατανάλωση 130 W. Βάρος 7kg. Διαστάσεις (482Χ88Χ380mm) |
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.