Content |
This is the most critically acclaimed model in the M-Series line, praised by top audio engineers and pro audio reviewers year after year. The ATH-M50x features the same coveted sonic signature, now with refined earpads and detachable cables. From large-aperture drivers to sound isolating earcups and robust construction, the M50x provides an unmatched experience for the most critical audio professionals.
- Critically acclaimed sonic performance praised by top audio engineers and pro audio reviewers
- Proprietary 45 mm large-aperture drivers with rare earth magnets and copper-clad aluminum wire voice coils
- Exceptional clarity throughout an extended frequency range, with deep, accurate bass response
- Circumaural design contours around the ears for excellent sound isolation in loud environments
- 90° swiveling earcups for easy, one-ear monitoring
- Professional-grade earpad and headband material delivers more durability and comfort
- Detachable cable (3 cables included)
Specifications
- Type: Closed-back dynamic
- Driver Diameter: 45 mm
- Magnet: Neodymium
- Voice Coil: CCAW (Copper-clad aluminum wire)
- Frequency Response: 15 - 28,000 Hz
- Max Input Power: 1,600 mW @ 1KHz
- Sensitivity: 99 dB
- Impedance: 38 ohms
- Folding/collapsible: Yes
- Weight: 10 oz (284 g) without cable/connector
- Cable - Detachable: Yes
- Cable Includes: 1.2m-3m coiled, 3m straight, 1.2m straight cables
- Connector: Gold-plated stereo 1/8" (3.5 mm) connector with strain relief
- Accessories included: Screw-on 1/4" adapter, pouch
|
The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing.
- Advanced build quality and engineering
- 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
- Tuned for enhanced low-frequency performance
- Circumaural design contours around the ears for excellent sound isolation in loud environments
- Convenient single-side cable exit
Specifications
- Type: Closed-back dynamic
- Driver Diameter: 40 mm
- Magnet: Neodymium
- Voice Coil: Copper-clad aluminum wire
- Frequency Response: 15 - 20,000 Hz
- Maximum Input Power: 700 mW at 1 kHz
- Sensitivity: 96 dB
- Impedance: 47 ohms
- Weight: 190 g (6.7 oz), without cable and connector
- Cable: 3.0 m (9.8'), straight, left-side exit
- Accessory Included: 6.3 mm (1/4“) snap-on adapter
|
Τύπος ακουστικών: κλειστού τύπου
Transmission Type: Με καλώδιο
Υλικό Ακουστικού: Protein leatherette cover, memory foam filling
Nominal Impedance Headphones: 32 ohms
Βάρος ακουστικών χωρίς καλώδιο: 360 g
Headphone frequency response: 5 - 50,000 Hz
Nominal sound pressure level: 100 dB (1mW)
Sound coupling to the ear: Circumaural (around the ear)
Καλώδιο & Βίσμα: 1.40 straight cable (double-sided), OCC 7N copper, textile braided, 3.5 mm jack plug with 6.35 mm jack adapter
|
Closed headphone for drummers and monitoring purposes (FOH), with extreme isolation against ambient noise.
The dynamic, closed DT 770 M has especially been designed for drummers and FOH monitoring. The strengthened headband and the softskin ear pads provide an excellent isolation against ambient noise. The single sided straight cable allows a volume control directly at the headphone. ▲ Closed headphone ▲ Excellent ambient noise attenuation (35 dBA) ▲ Superb sound quality with high sound pressure level (105 dB) ▲ Extended frequency range ▲ Single-sided cable with volume control ▲ Robust, easy serviceable construction as all parts are replaceable ▲ Excellent comfort for long-term wearing, softskin ear pads ▲ Secure and comfortable fit due to rugged, adjustable headband construction with soft padding ▲ Single-sided cable ▲ Supplied in a carrying case (nylon)
Transmission type |
|
Wired |
Headphone design (operating principle) |
|
Closed |
Headphone impedance |
|
80 ohms |
Headphone frequency response
The frequency response specifies the highest and lowest frequencies reproduced by the acoustic transducer of the headphones.
|
|
5 - 30.000 Hz |
Nominal sound pressure level
The (nominal) sound pressure level is the pressure in pascals (Pa) with which the air and the eardrum are caused to vibrate, better known as the volume. The sound pressure level is therefore a measure of the volume of a set of headphones under standardized conditions. However, it says nothing about whether the distortion is low and the sound is good at such a high volume.
|
|
105 dB |
Construction |
|
Circumaural (around the ear) |
Cable & plug |
|
Straight connecting cable with mini-jack plug (3.5 mm) & ¼" adapter (6.35 mm) |
Net weight without packaging |
|
300 g
|
| Closed reference headphone for control and monitoring applications (optionally with limiter).
The DT 770 PRO is a closed dynamic headphone and has been designed for critical music and sound monitoring. The single sided cable makes the handling of the headphone easy. The cushion system allows the DT 770 PRO to be used comfortably for long periods of time.
▲ Closed, diffuse-field studio headphone
▲ "Bass reflex" technology for improved bass response
▲ Comfortable fit due to rugged, adjustable, soft padded headband construction
▲ Robust, easy serviceable construction as all parts are replaceable
▲ Single-sided cable
▲ NEW - Limiter (Optional)
▲ Velour, circumaural ear pads
Transmission type |
|
Wired |
Headphone design (operating principle) |
|
Closed |
Headphone impedance |
|
250 ohms |
Headphone frequency response |
|
5 - 35.000 Hz |
Nominal sound pressure level |
|
96 dB |
Construction |
|
Circumaural (around the ear) |
Cable & plug |
|
Coiled connecting cable with mini-jack plug (3.5 mm) & ¼" adapter (6.35 mm) |
Net weight without packaging |
|
270 g |
| Ακουστικά για DJ με ευαισθησία 110 db SPL, ωμικότητα 64 Ohms, 20Ηz-20KHz απόκριση συχνότητας. Μήκος καλωδίου 2 μέτρα.
Κατασκευαστής |
BEHRINGER |
Application |
Studio |
Τύπος Ακουστικών |
Studio |
Χρώμα Ακουστικών |
Ασημένια |
Μοντέλο |
HPS3000 |
Part Number |
000-189 |
Εγγύηση |
1 Χρόνος Εγγύηση |
Whether you're mixing, monitoring or just enjoying an MP3, you want your headphones to deliver a wide frequency response and high dynamic range. The HPS3000 headphones provide incredible performance for a price well within any budget
The HPS3000 provides everything you need for comfortable listening. The oval-shaped ear cups contain high-resolution cobalt capsules that deliver every nuance of your sound. The one-sided cable is engineered from the finest oxygen-free copper wire that resists tangling and provides maximum durability. It also comes with a 1/4" TRS adapter for the 1/8" TRS connector, making it compatible with everything from your MP3 player to your mixing console.
FEATURES
- Ultra-wide frequency response
- High-definition bass and super-transparent highs
- Ultra-wide dynamic range
- High-efficiency cobalt capsule
- 1/8" Connector plus 1/4" adapter included
- Single-sided cord with oxygen-free copper wires
- Optimized oval-shaped ear cups
SPECIFICATIONS
HPS3000 High-Performance Studio Headphones
- Capsule diameter: 40 mm
- Frequency response: 20Hz-20kHz
- Max. power handling: 100 mW
- Impedance: 64 Ohm
- Sensitivity: 110dB@1kHz
- Cord length: 2.0 m
- Connector: 1/8" TRS connector plus 1/4" TRS adapter
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.