Audio Technica M3R Stereo receiver for M3 in-ear monitor system

543.00 με ΦΠΑ 24%

Διαθέσιμο κατόπιν παραγγελίας

EAN: N/A
Υπολογισμός δόσεων
CompareAdd to wishlist Υποβολή Καλύτερης Τιμής
Διαθεσιμότητα: Κατόπιν Παραγγελίας Κατόπιν Παραγγελίας Κωδικός προϊόντος: M3R Κατηγορία:
The M3R belt pack receiver is part of the M3 system. Rugged, ergonomic compensate housing includes a field-replaceable flexible-whip antennas. Digital LCD display with soft touch controls. The stereo monitor system offers Personal Mix Control, which gives each musician volume and mix control of two independent signals on stage, via easy-to-use controls on the M2R […]

 

Διαβάστε περισσότερα

The M3R belt pack receiver is part of the M3 system. Rugged, ergonomic compensate housing includes a field-replaceable flexible-whip antennas. Digital LCD display with soft touch controls. The stereo monitor system offers Personal Mix Control, which gives each musician volume and mix control of two independent signals on stage, via easy-to-use controls on the M2R stereo body-pack receiver. Any number of M2R stereo receivers may be used on the same frequency with a single M2T stereo transmitter. On board 3 level limiter (defeatable) helps protect your hearing from sudden peaks. Includes Audio-Technica earphones with proprietary dynamic drivers offer full frequency response and outstanding isolation with 3 sizes of rubber eartips plus an ear-conforming foam tip. Also, an auxiliary input offers a connection point for an ambient microphone, click track, or other mic- or line-level input.

These rugged systems are built to stand up to the inevitable bumps of life on the road, delivering clear, natural sound for touring and installed-sound uses.

 

  • Receiving System: Double conversion superheterodyne
  • RF Sensitivity: 20 dBuV (at 60 dB S/N ratio, 50 ohms termination)
  • Headphone Output Connector: 3.5 mm TRS stereo phone jack
  • Headphones Output Power: 65 mW (at 32 ohms)
  • Antenna Input: SMA-type, 50 ohms
  • Aux. Input Connector: 3.5 mm TRS stereo phone jack
  • Batteries: 2 x 1.5V AA (not included)
  • Battery Life: 8 hours (alkaline) Depending on battery type and use pattern
  • Dimensions: 70.0 mm (2.76“) W x 25.0 mm (0.98“) D x 110.0 mm (4.33“) H
  • Net Weight: 133 g (4.7 oz), without batteries
  • Accessories Included: EP3 earphone; flexible antenna

 

Βάρος 0.20 kg

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Κάνετε την πρώτη αξιολόγηση για το προϊόν: “Audio Technica M3R Stereo receiver for M3 in-ear monitor system”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Quick Comparison

Audio Technica M3R Stereo receiver for M3 in-ear monitor system removeLD Systems LDMEI100G2BPR ΔΕΚΤΗΣ IN-EAR Wireless In-Ear Monitoring system removeAudio Technica AEW-T1000a UHF UniPak™ πομπός removeSHURE ULXP4 Professional Ασύρματος Δέκτης removeLD Systems LDMEI1000G2BPR ΔΕΚΤΗΣ IN-EAR Wireless Monitoring system removeTOA WT-5800 ΑΣΥΡΜΑΤΟΣ ΔΕΚΤΗΣ 64CH, TR DIV remove
NameAudio Technica M3R Stereo receiver for M3 in-ear monitor system removeLD Systems LDMEI100G2BPR ΔΕΚΤΗΣ IN-EAR Wireless In-Ear Monitoring system removeAudio Technica AEW-T1000a UHF UniPak™ πομπός removeSHURE ULXP4 Professional Ασύρματος Δέκτης removeLD Systems LDMEI1000G2BPR ΔΕΚΤΗΣ IN-EAR Wireless Monitoring system removeTOA WT-5800 ΑΣΥΡΜΑΤΟΣ ΔΕΚΤΗΣ 64CH, TR DIV remove
Image
SKUM3RLDMEI100G2BPRAEW-T1000aULXP4LDMEI1000G2BPRWT-5800
Rating
Price 543.00 με ΦΠΑ 24% 234.56 με ΦΠΑ 24% 460.56 με ΦΠΑ 24% 750.04 με ΦΠΑ 24% 227.65 με ΦΠΑ 24% 408.63 με ΦΠΑ 24%
Stock

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Μόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)

Διαθέσιμο κατόπιν παραγγελίας

AvailabilityΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΜόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)Διαθέσιμο κατόπιν παραγγελίας
Add to cart

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Description
Content

The M3R belt pack receiver is part of the M3 system. Rugged, ergonomic compensate housing includes a field-replaceable flexible-whip antennas. Digital LCD display with soft touch controls. The stereo monitor system offers Personal Mix Control, which gives each musician volume and mix control of two independent signals on stage, via easy-to-use controls on the M2R stereo body-pack receiver. Any number of M2R stereo receivers may be used on the same frequency with a single M2T stereo transmitter. On board 3 level limiter (defeatable) helps protect your hearing from sudden peaks. Includes Audio-Technica earphones with proprietary dynamic drivers offer full frequency response and outstanding isolation with 3 sizes of rubber eartips plus an ear-conforming foam tip. Also, an auxiliary input offers a connection point for an ambient microphone, click track, or other mic- or line-level input.

These rugged systems are built to stand up to the inevitable bumps of life on the road, delivering clear, natural sound for touring and installed-sound uses.

 

  • Receiving System: Double conversion superheterodyne
  • RF Sensitivity: 20 dBuV (at 60 dB S/N ratio, 50 ohms termination)
  • Headphone Output Connector: 3.5 mm TRS stereo phone jack
  • Headphones Output Power: 65 mW (at 32 ohms)
  • Antenna Input: SMA-type, 50 ohms
  • Aux. Input Connector: 3.5 mm TRS stereo phone jack
  • Batteries: 2 x 1.5V AA (not included)
  • Battery Life: 8 hours (alkaline) Depending on battery type and use pattern
  • Dimensions: 70.0 mm (2.76“) W x 25.0 mm (0.98“) D x 110.0 mm (4.33“) H
  • Net Weight: 133 g (4.7 oz), without batteries
  • Accessories Included: EP3 earphone; flexible antenna

 

User's Manual

LD Systems MEI100G2

The LD Systems MEI 100 G2 is an advanced 96 channel UHF in-ear monitoring system delivering outstanding sound with extended dynamics in both the 823 - 832 and 863 - 865 MHz bands.

Switchable mono and stereo modes select the perfect monitoring setting for live music, theatre and voice applications while an input limiter has been integrated for consistent, distortion-free sound reproduction from 80Hz - 15 kHz with a high S/N ratio and low THD. The LD MEI 100 G2 allows the use of up to 5 systems simultaneously.

 

* license free: ISM-Band license free in Europe, please check duplex gap on a country-by-country basis


  • Product type: Belt pack receiver
  • Radio frequency range: 823 - 832 and 863 - 865 MHz
  • Channels: 96 (8 groups of 12 channels)
  • Transmission method: FM, stereo
  • Frequency response: 80 Hz - 15 kHz ± 3 dB
  • Audio outputs: 3.5 mm jack
  • Max. audio output level: 100 mW
  • Controls: Up, Down, Set, Volume
  • Indicators: LC display, RF (LED)
  • Power supply: 2 x 1.5 V AA
  • Operating time: > 10 hrs.
  • Width: 65 mm
  • Height: 95 mm
  • Depth: 25 mm

 

Compatible with the Wireless Essentials® range. Rugged, ergonomic metal housing. Includes field-replaceable helical and flexible-whip antennas. Three-position sliding cover limits access to controls as desired: full access, Power/Mute button only, or no access. Two position mounting clip. For use with AEW-T1000a and all Audio-Technica UniPak™ Wireless Transmitters.

The AEW-T1000a wireless UniPak® body-pack transmitter has both low and high impedance inputs plus a DC bias connection allowing it to be used with both condenser and dynamic microphones. The locking 4-pin HRS-type audio input connector is recessed to protect the connection from damage. A dual-colour power/mute indicator LED provides visual indication of transmitter status. The transmitter operates using two standard AA batteries and features high- and low-level RF output settings. The low-level setting allows two additional hours of battery life while retaining a strong RF signal link. Soft-touch controls provide convenient access to a variety of functions including: RF power, audio input level, power/mute locks and frequency selection. Each transmitterʼs backlit LCD display presents a great deal of setup and operating information clearly and conveniently, including battery level remaining, mute, and operating frequency. A flashing "Lo-Batt” alert visually signals the battery life is almost depleted. Programmable power/mute locks limit the functioning of transmitterʼs power/mute button as desired for particular users and applications. Four nameable user presets allow for storage and recall of commonly used settings. To match the audio input level to the transmitter, a ten-position audio input gain setting selected through the function menu is provided. The body-pack features a safety cover to protect the soft-touch controls from being accidently activated and a recessed input connector to increase the life of the microphone cable. Inputs are available on the UniPak® for low impedance microphone and high impedance musical instrument or line input. Constructed of metal, the body-pack transmitter features a field replaceable antenna, captive locking battery cover door, a short rigid helical antenna and a flexible wire antenna.

  • Available in the following frequency bands:
    541.500 - 566.375 MHz (C Band)
    655.500 - 680.375 MHz (D Band)
    721.500 - 746.375 MHz (G Band)
  • 25 kHz frequency spacing makes it easier to find a clear, open
  • frequency in crowded RF environments
  • Dual RF power output selection to optimize battery life
  • Digital Tone Lock™ squelch that communicates transmitter data
  • to the receiver
  • Function menu displayed in a backlit LCD window, controlled by
  • internal soft-touch controls
  • High efficiency dual companding system for flawless audio
  • Four nameable user presets
  • Battery fuel gauge on LCD readout
  • Recessed microphone input connector
  • Power/mute lock provision as well as safety door to cover controls
  • Dual-colour power/mute status indictor
  • Microphone or line input with DC bias voltage
  • 18 dB audio input level adjustment
  • Operates on two AA batteries
  • Captive locking battery compartment door
  • Adjustable squelch
  • Rugged metal housing with a reversible clothing clip
  • RF Power Output: High: 35 mW; Low: 10 mW, nominal
  • Spurious Emissions: According to National Regulations
  • Microphone Dynamic Range: >=110 dB, A-weighted
  • Instrument Dynamic Range: >=110 dB, A-weighted
  • Input Connections: High impedance, low impedance, bias
  • Batteries: Two 1.5V AA alkaline (not included)
  • Battery Life: Approximately 8 hours (High); 10 hours (Low), depending on battery type and use pattern
  • Dimensions: 66.0mm W x 87mm H x 24mm; not including antenna
  • Net Weight: 125 g

Shure ULXP4 Professional Ασύρματος Δέκτης

The Shure ULX? Professional wireless receiver offers an exceptional value in both performance
and price, for both working musicians and sound installers. The expanded feature set of the ULXP4
wireless receiver, with advanced settings and controls including lockable settings and group scan
offers a direct path to full, clear audio signals.

Features:

Automatic Frequency Selection with group scan function
Over 1400 selectable frequencies
Predictive Diversity
5-segment transmitted audio signal strength meter
5-segment RF meter
3-segment transmitter battery fuel gauge
Advanced multi-function LCD displays group and channel
Mic/Line switch
Remotable 1/2-wave antenna
Frequency and volume lockout
XLR and 1/4-inch output
Rugged metal chassis
1/2 rack design

 Battery disposal information [77,1 KB]

 

LD Systems MEI1000G2

The LD Systems MEI 1000 G2 is an advanced LICENSE FREE* 96 channel UHF in-ear monitoring system delivering natural sound with extended dynamics and low crosstalk in both the 823 - 832 and 863 - 865 MHz bands.

 

Switchable mono, stereo and focus modes select the perfect monitoring applications while adjustable EQ and limiter functions have been integrated for consistent sound reproduction from 60Hz - 16 kHz with a high S/N ratio and low THD. The LD MEI 1000 G2 allows the use of up to 5 systems simultaneously.

* license free: ISM-Band license free in Europe, please check duplex gap on a country-by-country basis

  • Model name: LDMEI1000G2BPR
  • Product type: Belt pack receiver
  • Radio frequency range: 823 - 832 and 863 - 865 MHz
  • Channels: 96 (8 groups of 12 channels)
  • Transmission method: FM, stereo
  • Frequency response: 60 Hz - 16 kHz
  • S/N ratio: 80 dB
  • THD:
  • Audio outputs: 3.5 mm jack
  • Max. audio output level: 100 mW
  • Controls: Up, Down, Escape, Set, Volume
  • Indicators: LC Display, Low Battery, Power
  • Power supply: 2 x 1.5 V AA
  • Operating time: > 13 hrs., battery-dependent
  • Width: 65 mm
  • Height: 90 mm
  • Depth: 24 mm

Δέκτης UHF με δυνατότητα τοποθέτησης σε rack, με 64 κανάλια,τεχνολογία True Diversity για αδιάλειπτη λήψη, 3πλό κύκλωμα squelch, δυνατότητα mix input για πολλαπλή συζευξη, 75Ω έξοδοι και είσοδοι κεραίας BNC Α+Β για χρήση με εξωτερική κεραία και διαμοιρασμό σήματος RF, οθόνη LCD, με ενδείξεις RF-AF-Antenna A/B ?ενδειξη μπαταρίας. Λειτουργία channel check για εύρεση «καθαρών» συχνοτήτων. S/N 110 dΒ. 5-pin service port. Έξοδος XLR mic out και ? Jack line out (unbalanced)

Specification
(*1) 0 dB = 1 V
Power Source AC mains (supplied AC adapter must be used)
Power Consumption 250 mA (12 V DC)
Receiving Frequency 636 - 865 MHz(*2), UHF
Channel Selectable 64 selectable frequencies
Receiving System Double super-heterodyne
Diversity System Space diversity (true diversity)
Mixing Output MIC: -60 dB(*1), 600 Ω, balanced, XLR-3-32 type connector
LINE: -20 dB(*1), 600 Ω, unbalanced, phone jack
Mixing Input -20 dB(*1), 10 kΩ, unbalanced, phone jack
Antenna Input 75 Ω, BNC (phantom powering for antenna), 9 V DC, 30 mA (max)
Antenna Output 75 Ω, BNC (Gain 0 dB)
Receiving Sensitivity 90 dB or more, S/N ratio (20 dBμV input, 40 kHz deviation)
Squelch Sensitivity 18 - 40 dBμV variable
Squelch System Using together of noise SQ, carrier SQ and tone SQ
Tone Frequency 32.768 kHz
Indicator Audio (6 step), RF (6 step), ANT A/B, Audio (peak), Battery alarm
Channel Check Usable frequencies scanning
S/N Ratio 110 dB or more (A-weight, unbalanced output)
Harmonic Distortion 1 % or less (typical)
Frequency Response 100 Hz - 15 kHz, ±3 dB
Operating Temperature -10 ℃ to +50 ℃
Finish Resin, black
Dimensions 210 (W) × 44 (H) × 205.1 (D) mm
Weight 700 g
Accessory AC adapter(*3) …1, Wireless antenna …2
Option Mounting bracket kit: MB-WT3 (for rack mounting one WT-5800 unit)
MB-WT4 (for rack mounting two WT-5800 units)

 

Weight0.20 kg0.33 kg0.10 kg1.10 kg0.33 kg0.70 kg
DimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/Δ
Additional information
Βάρος 0.20 kg
Βάρος 0.33 kg
Βάρος 0.10 kg
Βάρος 1.10 kg
Βάρος 0.33 kg
Βάρος 0.70 kg