AUDIX ADX10-p Condenser lapel microphone

213.34 με ΦΠΑ 24%

Σε απόθεμα

EAN: N/A
Υπολογισμός δόσεων
CompareAdd to wishlist Υποβολή Καλύτερης Τιμής
Διαθεσιμότητα: Διαθέσιμο 1-3 Ημ. Διαθέσιμο 1-3 Ημ. Κωδικός προϊόντος: ADX10-p Κατηγορία:
Miniaturized lavalier condenser microphone for wireless or wired applications. The ADX10 is a miniaturized condenser microphone designed for lavaliere applications such as speech, presentation and theatrical production. The ADX10 has the ability to accurately capture and reproduce vocals from a comfortable distance of 4“- 8“. This mic is clear, resistant to feedback and easy to […]

 

Διαβάστε περισσότερα

Miniaturized lavalier condenser microphone for wireless or wired applications.

The ADX10 is a miniaturized condenser microphone designed for lavaliere applications such as speech, presentation and theatrical production. The ADX10 has the ability to accurately capture and reproduce vocals from a comfortable distance of 4“- 8“. This mic is clear, resistant to feedback and easy to use.

Designed with a uniformly controlled cardioid polar pattern, the ADX10 helps to isolate the area or section being miked from other vocals or instruments on stage. The ADX10 has a smooth, accurate frequency range of 50 Hz – 18 kHz. This mic is lightweight, low profile and has a natural sound with exceptional sound response.

Primarily for use with the Audix RAD360 Wireless System, the ADX10 includes a tie-clip and a 3′ attached cable  terminating to a mini-XLRf connector.

MODEL VARIATIONS:

ADX10P – For hard wired application. Includes an 8′ cable terminating to a mini-XLRf connector tie clip, external windscreen and a phantom power adapter module. 9 – 48 V phantom power required.

Type Pre-polarized Condenser
Polar Pattern Cardioid
Frequency Response 50Hz – 18kHz
Impedance 250 Ohms
Sensitivity 5 mV/Pa @1k
Βάρος 0.50 kg

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Κάνετε την πρώτη αξιολόγηση για το προϊόν: “AUDIX ADX10-p Condenser lapel microphone”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Quick Comparison

AUDIX ADX10-p Condenser lapel microphone removeMIPRO MU-55LS παντοκατευθυντικο μικροφωνο πετου removeSHURE SLX14 Δέκτης SLX4 + πομπός σώματος SLX1 removeRODE Smart Lav+ Ενσύρματο Μικρόφωνο removeSENNHEISER E-608 Υπερ καρδιοηδές δυναμικό μικρόφωνο οργάνων removeShure WL50B /W Πυκνωτικό omni Μικρόφωνο Πέτου remove
NameAUDIX ADX10-p Condenser lapel microphone removeMIPRO MU-55LS παντοκατευθυντικο μικροφωνο πετου removeSHURE SLX14 Δέκτης SLX4 + πομπός σώματος SLX1 removeRODE Smart Lav+ Ενσύρματο Μικρόφωνο removeSENNHEISER E-608 Υπερ καρδιοηδές δυναμικό μικρόφωνο οργάνων removeShure WL50B /W Πυκνωτικό omni Μικρόφωνο Πέτου remove
Image
SKUADX10-pMIP00246SLX14H11RD00044H10SE00058WL50B
Rating
Price 213.34 με ΦΠΑ 24% 101.00 με ΦΠΑ 24% 637.00 με ΦΠΑ 24% 65.00 με ΦΠΑ 24% 189.00 με ΦΠΑ 24% 323.00 με ΦΠΑ 24%
Stock

Σε απόθεμα

Διαθέσιμο κατόπιν παραγγελίας

Σε απόθεμα

Σε απόθεμα

Σε απόθεμα

Σε απόθεμα

AvailabilityΣε απόθεμαΔιαθέσιμο κατόπιν παραγγελίαςΣε απόθεμαΣε απόθεμαΣε απόθεμαΣε απόθεμα
Add to cart

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Description
Content

Miniaturized lavalier condenser microphone for wireless or wired applications.

The ADX10 is a miniaturized condenser microphone designed for lavaliere applications such as speech, presentation and theatrical production. The ADX10 has the ability to accurately capture and reproduce vocals from a comfortable distance of 4“- 8“. This mic is clear, resistant to feedback and easy to use.

Designed with a uniformly controlled cardioid polar pattern, the ADX10 helps to isolate the area or section being miked from other vocals or instruments on stage. The ADX10 has a smooth, accurate frequency range of 50 Hz - 18 kHz. This mic is lightweight, low profile and has a natural sound with exceptional sound response.

Primarily for use with the Audix RAD360 Wireless System, the ADX10 includes a tie-clip and a 3' attached cable  terminating to a mini-XLRf connector.

MODEL VARIATIONS:

ADX10P - For hard wired application. Includes an 8' cable terminating to a mini-XLRf connector tie clip, external windscreen and a phantom power adapter module. 9 - 48 V phantom power required.

Type Pre-polarized Condenser
Polar Pattern Cardioid
Frequency Response 50Hz - 18kHz
Impedance 250 Ohms
Sensitivity 5 mV/Pa @1k


  • Miniature MU-55 is inconspicuous, lightweight and waterproof.
  • Supplied with 4-pin mini XLR and fits all MIPRO bodypack transmitters.
  • Featuring a smooth, warm, natural sound.
  • Available in black or beige colors.
  • Ideal for theater, houses of worship and educational applications.
   
  Capsule Module 4.5 mm Ø omni-directional condenser microphone  
  Frequency Response 40 Hz~20 kHz  
  Sensitivity -49±3 dBV/Pa (0dB=1V/Pa)  
  Max. SPL 135 dB (Typical,1%THD)  
  Plug 4-pin mini XLR or TA4F  
  Color Black or Beige  
  Cable Length 150 cm / 59 "  
  Weight Approx. 14 g / 0.5 oz  
  Note Refer to actual product in the event of product description discrepancy.
 

 Shure SLX14 Instrument Wireless System Features:

    SLX4 Wireless Receiver:
    Automatic Frequency Selection
    Automatic Transmitter Setup
    960 Selectable frequencies across 24MHz bandwidth
    Detachable 1/4 wave antennas
    Microprocessor-controlled diversity
    RF presence LED
    5-segment audio meter
    Multi-function, backlit LCD
    Low battery indicator
    Frequency and power lockout
    Rugged metal chassis
    Volume control on rear of unit
    1/2 rack design
    Furnished rack hardware
    Non-slip bumpers for use out of rack
    XLR and 1/4" outputs

    SLX1 Bodypack Transmitter
    Automatic Transmitter Setup
    Backlit LCD with timeout feature
    Frequency and power lockout
    3-segment battery fuel gauge
    2 AA batteries (included) provide 8 hours of continuous use
    518 - 782 MHz operating range



Shure SLX14 Instrument Wireless System Specifications:

    SLX4 Wireless Receiver:
    Audio Output Level (ref. ± 38kHz deviation with 1kHz tone): XLR connector (into 600 Ohm load): —13dBV; 1/4" connector (into 3000 Ohm load): —2dBV
    Output Impedance: XLR connector: 200 Ohms; 1/4" connector: 1kohms
    XLR output: Impedance balanced; Pin 1: Ground; Pin 2: (+); Pin 3: (-)
    Sensitivity: —105 dBm for 12 dB SINAD, typical
    Image Rejection: >70 dB, typical
    Power Requirements: 12—18 Vdc at 150 mA, supplied by external power supply
    Operating Range Under Typical Conditions: 300 ft. (100m)
    Note: Actual range depends on RF signal absorption, reflection, and interference
    Audio Frequency Response (+/— 2 dB): Minimum: 45 Hz: Maximum: 15 kHz
    Note: Overall system frequency depends on microphone element.
    Total Harmonic Distortion (ref. +/— 38 kHz deviation, 1 kHz tone): 0.5%, typical
    Dynamic Range: >100 dB A-weighted
    Operating Temperature Range: —18 degree C (0 degree F) to +50 degree C (+122 degree F)
    Note: battery characteristics may limit this range
    Dimensions (H x W x D): 1.65 x 7.76 x 5.28 in., (42 x 197 x 134 mm)
    Weight: 1 lb. 13 oz. (816 g )
    Housing: Galvanized steel
    Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with
    respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output.
    Logic Connections: Pin 1: Logic output, Transmitter Mute Status. Mute=low (0 V). Sinks up to 100 mA. Absolute maximum -0.7 to 5.5V DC; Pin 2: Logic ground; Pin 3: Logic output, Battery Status. Good=low (0 V). Sinks up to 100 mA; Absolute maximum -0.7 to 5.5V DC

    SLX1 Bodypack Transmitter
    Audio Input Level: -10 dBV maximum at mic gain position, +10 dBV maximum at 0 dB gain position, +20 dBV maximum at -10 dB gain position
    Gain Adjustment Range: 30dB
    Input Impedance: 1 Mohms
    RF Transmitter Output: 30 mW maximum (dependent on applicable country regulations
    Dimensions (H x W x D): 4.25 x 2.50 x 0.75 in. (108 x 64 x 19 mmD)
    Weight: 81 grams (3 oz.) without batteries
    Housing: Molded ABS case
    Power Requirements: 2 "AA" size alkaline or rechargeable batteries
    Battery Life: >8 hours (alkaline)

Επαγγελματικό broadcast μικρόφωνο για χρήση με smartphones, συμβατό με iOS και Android κινητά τηλέφωνα, απόκριση συχνότητας 60 Hz - 18 kHz, πυκνωτικό μικρόφωνο, παντοκατευθυντικό, output impedance 3k Ω, signal to noise ratio 67dB, Clipping SPL 110dB, δυναμικό εύρος 83dB, αποσπώμενο pop filter ανθεκτικό στο νερό, περιλαμβάνει clip και θήκη μεταφοράς.

Tύπος Πυκνωτικό Πολικό Διάγραμμα Omni-directional Απόκριση συχνότητας 60 Hz - 18 kHz Ευαισθησία -35dB (17.8mV @94dB SPL) Αντίσταση 3kΩ Typical Συνολική αρμονική παραμόρφωση - Διαστάσεις - Βάρος - Αξεσουάρ -

Δυναμικό μικρόφωνο κατάλληλο για πνευστα όργανα (φλαουτο, σαξοφωνο κ.λ.π.) , επίσης κατάλληλο για κρουστά

με λαιμό εύκαμπτο  και ευκολη τοποθέτηση σε όργανο για να έχει την μεγαλύτερη ηχητική απολαβή εξόδου.

 

The e 608 is a super-cardioid microphone ideal for almost invisible clip-miking
of woodwind (except certain Flutes), brass and drums. A newly developed clamp
and gooseneck mounting enables the capsule to be positioned close to the signal
source for high realism and high-level output.

Features
Rugged reinforced glass-fibre body
Shock-mounted capsule provides low sensitivity to impact and handling noise
Hum compensating coil
Extremely robust connection cable with XLR connector
Delivery Includes
1 e 608
1 microphone clip
1 pouch

Technical Data
Frequency Response  40.....16000 Hz 
Sensitivity in free field, no load (1kHz)  0,8 mV/Pa 
Min. terminating impedance  1000 Ohm 
Dimensions  d 17 x 185 mm 
Weight w/o cable  20 g 

Παντοκατευθυντικό (omni), κάψα miniature για θέατρα-TV , μαύρο ή λευκό.

Weight0.50 kg0.20 kg2.00 kg0.50 kg0.50 kg0.20 kg
DimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/Δ
Additional information
Βάρος 0.50 kg
Βάρος 0.20 kg
Βάρος 2.00 kg
Βάρος 0.50 kg
Βάρος 0.50 kg
Βάρος 0.20 kg