AUDIX ADX10FLP Miniaturized condenser flute mic

260.62 με ΦΠΑ 24%

Σε απόθεμα

EAN: N/A
Υπολογισμός δόσεων
CompareAdd to wishlist Υποβολή Καλύτερης Τιμής
Διαθεσιμότητα: Διαθέσιμο 1-3 Ημ. Διαθέσιμο 1-3 Ημ. Κωδικός προϊόντος: ADX10FLP Κατηγορία:
The ADX10FL P is characterized with a uniformly controlled cardioid polar pattern, helping to isolate the area or section being miked from other instruments or vocals on stage. With a smooth and accurate frequency range of 50 Hz – 18 kHz, the ADX10FL P is lightweight, low profile and will provide natural sound with exceptional […]

 

Διαβάστε περισσότερα

The ADX10FL P is characterized with a uniformly controlled cardioid polar pattern, helping to isolate the area or section being miked from other instruments or vocals on stage. With a smooth and accurate frequency range of 50 Hz – 18 kHz, the ADX10FL P is lightweight, low profile and will provide natural sound with exceptional transient response.

The ADX10FL P, specifically for use with a flute, includes a clip that attaches to the headstock of a flute, an 8ʼ cable terminating to a mini XLR-f connector and a phantom power adapter (APS 911). Other model versions are available as well, one of which is the ADX10 FL; for use with the Audix RAD360 wireless system which includes a flute clip, 3ʼ attached cable terminating to a mini-XLRf connector.

Manufactured to high standards and tight tolerances, the ADX10FL P features a modular threaded capsule, machined brass body with matte black finish, high quality shielded microphone cable and a variety of optional accessories.

Type Pre-polarized Condenser
Polar Pattern Cardioid
Frequency Response 50Hz – 18kHz
Impedance 250 Ohms
Sensitivity 4.5 mV/Pa @1k

 

Βάρος 1.00 kg

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Κάνετε την πρώτη αξιολόγηση για το προϊόν: “AUDIX ADX10FLP Miniaturized condenser flute mic”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Quick Comparison

AUDIX ADX10FLP Miniaturized condenser flute mic removeNPG CB-410 Μικρόφωνο Οργάνων 48V removeSHURE BETA 52A - Μικρόφωνο για μπότα drums removeSHURE KSM141/SL - Dual Pattern Μικρόφωνο οργάνων removeSENNHEISER E-902 CARDOID DYNAMIC INSTRUMENT MICROPHONE removeSENNHEISER E-602 II Δυναμικό Μικρόφωνο για Έγσορδα, Μπότα remove
NameAUDIX ADX10FLP Miniaturized condenser flute mic removeNPG CB-410 Μικρόφωνο Οργάνων 48V removeSHURE BETA 52A - Μικρόφωνο για μπότα drums removeSHURE KSM141/SL - Dual Pattern Μικρόφωνο οργάνων removeSENNHEISER E-902 CARDOID DYNAMIC INSTRUMENT MICROPHONE removeSENNHEISER E-602 II Δυναμικό Μικρόφωνο για Έγσορδα, Μπότα remove
Image
SKUADX10FLPCB-410BETA 52AKSM141SLH10SE00102H10SE00118
Rating
Price 260.62 με ΦΠΑ 24% 47.11 με ΦΠΑ 24% 231.36 με ΦΠΑ 24% 515.99 με ΦΠΑ 24% 185.00 με ΦΠΑ 24% 148.00 με ΦΠΑ 24%
Stock

Σε απόθεμα

Σε απόθεμα

Μόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)

Σε απόθεμα

Σε απόθεμα

Σε απόθεμα

AvailabilityΣε απόθεμαΣε απόθεμαΜόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)Σε απόθεμαΣε απόθεμαΣε απόθεμα
Add to cart

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Description
Content

The ADX10FL P is characterized with a uniformly controlled cardioid polar pattern, helping to isolate the area or section being miked from other instruments or vocals on stage. With a smooth and accurate frequency range of 50 Hz - 18 kHz, the ADX10FL P is lightweight, low profile and will provide natural sound with exceptional transient response.

The ADX10FL P, specifically for use with a flute, includes a clip that attaches to the headstock of a flute, an 8ʼ cable terminating to a mini XLR-f connector and a phantom power adapter (APS 911). Other model versions are available as well, one of which is the ADX10 FL; for use with the Audix RAD360 wireless system which includes a flute clip, 3ʼ attached cable terminating to a mini-XLRf connector.

Manufactured to high standards and tight tolerances, the ADX10FL P features a modular threaded capsule, machined brass body with matte black finish, high quality shielded microphone cable and a variety of optional accessories.

Type Pre-polarized Condenser
Polar Pattern Cardioid
Frequency Response 50Hz - 18kHz
Impedance 250 Ohms
Sensitivity 4.5 mV/Pa @1k

 


Type: Black Electret Condenser
Polar Pattern: Uni-Directional
Frequency: 50Hz-16KHz
Sensitivity: -45dB
Output Impedance: 250 Ohm
Mixer Phantom Power: +48V
Ιδανικό για κρουστα, πνευστά & έγχορδα μουσικά

Optimized for low-frequency bass punch/high-power SPL handling. Designed for kick drum.

The Shure BETA®52A is a high output dynamic microphone with a tailored frequency response designed specifically for kick drums and other bass instruments. It provides superb attack and "punch“, and delivers studio quality sound even at extremely high sound pressure levels. 

The Beta 52A features a modified supercardioid pattern throughout its frequency range to insure high gain-before-feedback and excellent rejection of unwanted sound. A built in dynamic locking stand adapter with an integral XLR connector simplifies installation, particularly if the microphone is to be placed inside a kick drum. The stand adapter keeps the microphone position fixed and resists slipping, even when subjected to sharp blows and strong vibrations. A hardened steel mesh grille protects the Beta 52A from the abuse and wear associated with touring.

Features
  • Frequency response shaped specifically for kick drums and bass instruments
  • Built–in dynamic locking stand adapter with integral XLR connector simplifies setup, especially inside a kick drum
  • Studio quality performance, even at extremely high sound pressure levels
  • Supercardioid pattern for high gain before feedback and superior rejection of unwanted noise
  • Hardened steel mesh grille that resists wear and abuse
  • Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
  • Neodymium magnet for high signal–to–noise ratio output
  • Low sensitivity to varying load impedance
  • Legendary Shure quality and reliability
Type Dynamic (moving coil)
Frequency Response 20 to 10,000 Hz
Polar Pattern Supercardioid, rotationally symmetrical about microphone axis
Output Level Open Circuit Voltage: -64 dBV/Pa* (0.6 mV), *1 Pa = 94 dB SPL

 

The Shure KSM141 is an end-addressed condenser microphone with mechanically switching dual polar patterns (cardioid and omnidirectional). Designed for studio use, yet rugged enough for live applications, the KSM141 can withstand extremely high sound pressure levels (SPL). Its low self-noise and extended frequency response make it ideal for recording musical instruments.

Features

  • A mechanical polar pattern switch for highly consistent cardioid and true omnidirectional polar patterns. Provides flexibility in a wide variety of recording applications
  • Ultra-thin, 2.5 micron, 24 karat gold-layered, low mass Mylar? diaphragm for superior transient response
  • Class A, discrete, transformerless preamplifier for transparency, extremely fast transient response, no crossover distortion, and minimal harmonic and intermodulation distortion
  • Premium electronic components, including gold-plated internal and external connectors
  • Subsonic filter eliminates low frequency rumble (less than 17 Hz) caused by mechanical vibration
  • Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)
  • Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)
  • Three-position switchable low-frequency filter to reduce background noise and counteract proximity effect

Performance Characteristics

  • Extended frequency response
  • Low self noise
  • Exceptional reproduction of low-frequency sounds
  • Can withstand high sound pressure levels (SPL)
  • High output level
  • No crossover distortion
  • Uniform polar response
  • Superior common mode rejection and suppression of radio frequency interference

APPLICATIONS

Some typical applications for the KSM141 are listed below. Microphone use, however, is a matter of personal taste. The KSM141 may be used for a variety of applications other than those listed.

  • Acoustic instruments -- such as piano, guitar, drums, percussion, strings
  • Wind instruments -- brass and woodwind
  • Low frequency instruments -- such as double bass, electric bass, kick drum
  • Overhead miking -- drums or percussion
  • Ensembles -- choral or orchestral
  • Room ambiance pick-up -- guitar amplifier or drums

Both the acoustic environment and microphone placement strongly affect the sound obtained from miking a source. You may need to experiment with microphone placement and room treatments to achieve the best overall sound for each application.

Suggested Applications

Acoustic Guitar
Acoustic Bass
Cymbals
Brass/Woodwinds
Orchestra
Ensemble Vocals
Piano
Strings
Room Ambience
Live Recording

The e 902 is a dynamic cardioid instrument microphone, which was designed
for lowest bass signals with very high sound pressure levels.It is suitable for
kick drums, bass guitar-amps, tuba, and other bass instruments.
 
Features
Frequency response optimized for kick drum
Very fast attack
Exceptionally clean and clear pick-up of the deepest bass signals
Integral stand mount
Hum compensating coil
Shock mounted capsule
Robust metal body
Delivery Includes
e 902 microphone
Pouch
User Manual

Technical Data
Pick-up pattern  cardioid 
Frequency response  20...18000 Hz 
Sensitivity in free field, no load (1kHz)  0,2 mV/Pa; (@ 60 Hz): 0,6 mV/Pa 
Nominal impedance  350 Ohm 
Min. terminating impedance  1000 Ohm 
Dimensions  128,5 x 60 mm 
Weight  440 g 

Δυναμικό μικρόφωνο καρδιοειδές ειδικό για έγχορδα (κοντραμπάσο), μπότα, κλπ., 20Hz-16kHz

Απόκριση Συχνότητας : 20.....16000 Hz
Ευαισθησία σε ελεύθερο πεδίο, χωρίς φορτίο (1kHz) : 1,0 mV/Pa
Τερματισμένη Αντίσταση : 1000 Ohm
Διαστάσεις : d 60 x 153 mm
Βάρος :  550 g χωρίς καλώδιο

Weight1.00 kg1.00 kg0.80 kg0.50 kg0.44 kg0.55 kg
DimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/Δ
Additional information
Βάρος 1.00 kg
Βάρος 1.00 kg
Βάρος 0.80 kg
Βάρος 0.50 kg
Βάρος 0.44 kg
Βάρος 0.55 kg