AUDIX DP-Quad Drum-microphone set

NEW! 4-piece Drum Mic Package

When it comes to drum and percussion microphones, Audix is the industry leader. These high precision instrument microphones are designed to fill the specific needs of artists and engineers for both studio and live applications.

The Audix DP Series QUAD pack is the simplest and most effective combination of microphones that will allow you to capture the depth and imaging of a full drum kit. With kick, snare and two overheads, the QUAD incorporates the best of two miking techniques: close miking and overhead (ambient) miking.

Close Miking:
The D6 for kick drum and the i5 for snare are considered the two microphones every drummer must have. The kick and snare are considered the core of any drum kit and the foundation for every groove. Close miking insures that they will be captured in the mix. If either the kick or the snare is unable to be heard, there is simply no groove. Being high SPL dynamic microphones, the D6 and i5 excel at "close miking”. This miking technique is required in order to capture the attack and percussive sound of the drum. Also, by having the mic close to the source of the sound, it helps to isolate the sound of each drum and separate it from the rest of the kit.  

Overhead (ambient) miking:
Supporting the idea that "less is more”, there are many engineers who will use just two overhead mics to capture the natural sound of the complete drum kit. With two overhead mics, positioned correctly, it is absolutely true that you can capture the transients, tonality and balance of the kit in a completely phase-coherent manner. The ADX51, which is a pre-polarized condenser microphone with a 14mm gold sputtered diaphragm, is designed specifically with overhead applications in mind. Due to its cardioid pickup pattern, high sensitivity and slim pencil design, the two ADX51 mics can be easily positioned overhead to provide a nice stereo image of the entire drum kit. 

The Blend:
With contemporary music and with the volumes typically generated on stage, it is more practical and effective to create a blended effect of close miking and overhead miking – the exact intent of the DP-QUAD. The D6 will help provide the earthshaking lows and the attack of the kick;  the i5 will reinforce the depth and crack of the snare;  the overheads will pick up the high-hat, tom fills, cymbals and the ambiance of the entire kit. With the DP-QUAD, drums will maintain their sound integrity and critical presence, regardless of the size of the room and PA system.

• 1 x i5 snare mic
• 1 x D6 kick mic
• 2 x ADX51 overhead mics
• 1 x DVICE rim mount with MC1 mic clip
• 3 x DCLIP mic clips
• 2 x WS81C windscreens

Ζεύγος μικρόφωνων C-451B matched pair εργοστασιακά ως προς την απόκριση συχνότητας και την ευαισθησία. Παραδίδονται σε βαλίτσα μεταφοράς με 2 αντιανεμικά και βραχίονα στήριξης τους. Κατόπιν παραγγελίας. 3 έτη εγγύηση.
 
Precise artistic work deserves precise artistic craftsmanship. A classic by now, the CMS Series CK 1 capsule from AKG was a best seller from the moment it was launched in 1969. Comprising a range of interchangeable capsules and preamps as well as then innovative, dedicated accessories, the CMS Series from AKG quickly became a legend. It was discontinued in 1993. Responding to growing demand from recording engineers, AKG decided to produce the C 451 B with identical acoustical behaviour of the popular original C 451 EB + CK 1 microphone again, with dramatically improved specifications and outstanding price/ performance. The capsule of the new version is fixed permanently to the preamp to eliminate the mechanical problems of the screw joint. Using an extremely light diaphragm, the new C 451 B is almost totally insensitive to handling noise. An all-metal body provides excellent protection from RF interference and the microphone is rugged enough to give excellent results even under very harsh conditions.

The C 451 B is an excellent tool for accurately capturing signals rich in transients such as drums, overhead miking, or other instruments with a percussive sound. The airy sound, high overload limit of the capsule and electronic circuitry, and improved engineering details of the C 451 B are a solid foundation for creating another legend.

The matched pairs consist of two microphones that are within 1 dB to each other in sensitivity and also within 1 dB to each other in the range of 200 Hz to 15,000 Hz of the individual frequency response when used in cardioid mode and are selected from a large quantity of individual microphones using the described criteria by using a proprietary computer program.

Using this matched pair for stereo recordings utilizing various techniques will provide for a good and stable balance without frequency-dependent shifting of the stereo panorama.

The kit includes all the standard accessories of the individual package along with a stereo bar and proof of performance charts in an attractive carrying case (Soundtool case, middle size).

Features:

• Identical acoustics of the legendary CK 1.
• Rugged construction.
• Ruler-flat on-axis frequency response.
• Precise, nearly frequency independent cardioid.
• Extremely accurate signal transfer.
• Transformerless output stage for minimum distortion at low frequencies.
• Protected against electrostatic and magnetic interference.
• Selectable 10-dB and 20-dB preattenuation pads.
• Switchable highpass filter (75 Hz or 150 Hz, 12dB/octave).
• Operates on phantom power to DIN/IEC between 12 V and 48 V.
• Complete with SA 40 stand adapter and W 90 windscreen.
• Each microphone comes with its own individual frequency response plot.

Specifications:

• Polar pattern: Cardioid
• Frequency range: 20 to 20,000 Hz
• Sensitivity: 9 mV/Pa (-41 dBV)
• Max. SPL: 135/145/155 dB (0/-10/-20 dB) (k=0,5%)
• Equivalent noise level (CCIR 468-3): 29 dB
• Equivalent noise level: 18 dB-A
• Signal/noise ratio (A-weighted): 76 dB
• Preattenuation pad: 0 dB, 10 dB, 20 dB selectable
• Bass filter: Flat, 12 dB/octave at 75 or 150 Hz, selectable
• Impedance: 1000 ohms
• Supply voltage: 9 to 52 V phantom power to DIN 45596
• Current consumption:

The D 40 with its solid all-metal body will stand up to the hardships of night-after-night onstage use "with a smile“.
The Varimotion diaphragm deep-drawing process allows the diaphragm itself to be fine-tuned with no need for tuning resonators, leading to a quantum leap in audio performance.
The transducer is protected by a sturdy wire-mesh cap and takes extremely high sound pressure levels with ease.
An integrated stand adapter and standard H 440 mounting bracket for snare drums, tom-toms, etc. make the D 40 a highly versatile tool for use on drums, percussions, wind instruments, and guitar amps.

Musical instruments, Live applications.
Dynamic microphone designed for drums and percussions, wind instruments, and guitar amps
Patented AKG Varimotion diaphragm
Custom built capsule mounting
Spring steel wire-mesh cap
Rugged all-metal body withstands typical tough handling on stage

Type Cardioid
Polar pattern 75 to 20,000 Hz
Sensitivity 4 mV/Pa (-48 dBV)
Max. SPL 144/156 dB SPL (for 1%/3 % THD)
Equivalent noise level 18 dB-A
Impedance =1000 ohms
Connector 3-pin XLR
Finish dark stage blue
Dimensions length 104 mm (4.1 in.) height (incl. stand adapter): 79 mm (3.1 in.) max. dia.: 44 mm (1.7 in.)
Net weight 245 g (8.6 oz.)
 

NEW Wider mounting base capable of accommodating a larger range of microphone stands. Even works with the LP Claw.

Specifically engineered for drum and instrument applications, the Beta 56A's compact, pivoting design makes it the ideal choice for these applications.

Its extremely uniform supercardioid pickup pattern provides high gain before feedback and excellent rejection of unwanted noise. A built-in dynamic locking stand adapter with an integral XLR connector simplifies installation. The stand adapter keeps the microphone securely in place, even if it is struck by a drumstick. Typical Beta 56A applications include close miking of tom-toms and other percussion instruments, as well as guitar amplifiers, brass instruments, and woodwinds.

• Built-in stand adapter with dynamic locking system and XLR connector simplifies setup and provides greater flexibility
• Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off-axis sound
• Compact design reduces stage clutters
• Hardened steel mesh grille resists wear and abuse
• Neodymium magnet for high signal-to-noise ratio output
• Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
• Frequency response: 50 to 16,000 Hz

The e 902 is a dynamic cardioid instrument microphone, which was designed
for lowest bass signals with very high sound pressure levels.It is suitable for
kick drums, bass guitar-amps, tuba, and other bass instruments.
 
Features
Frequency response optimized for kick drum
Very fast attack
Exceptionally clean and clear pick-up of the deepest bass signals
Integral stand mount
Hum compensating coil
Shock mounted capsule
Robust metal body
Delivery Includes
e 902 microphone
Pouch
User Manual

Technical Data
Pick-up pattern  cardioid 
Frequency response  20...18000 Hz 
Sensitivity in free field, no load (1kHz)  0,2 mV/Pa; (@ 60 Hz): 0,6 mV/Pa 
Nominal impedance  350 Ohm 
Min. terminating impedance  1000 Ohm 
Dimensions  128,5 x 60 mm 
Weight  440 g