Content |
Warm, full sound optimized for small to mid-sized PA systems.
The OM2 is a dynamic vocal microphone used for a wide variety of live, home and studio applications. This mic has clear and accurate sound reproduction, resistance to feedback and ability to handle very high SPLs without distortion.
The OM2 utilizes a tight, uniform pattern which helps isolate vocals from the instruments on stage. With a wide frequency range of 50 Hz - 16 kHz, the OM2 employs a VLM™ diaphragm for a clear, precise sound with exceptional voice response.
Designed with a slight bass proximity and a tailored mid-range, the OM2 has a full-bodied sound on small to mid-sized PA systems while retaining true sound on large or professional PA systems.
Type | Dynamic | Polar Pattern | Hypercardioid | Frequency Response | 50Hz - 16kHz | Impedance | 290 ohms | Sensitivity | 1.6 mV / Pa @ 1k |
|
In the tradition of the SM58?, the Beta 58A dynamic microphone has become a top choice among vocalists and touring sound professionals.
The Shure Beta 58A is a high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording. It maintains a true supercardioid pattern throughout its frequency range. This insures high gain-before-feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. The Beta 58A has a shaped frequency response that is ideal for close-up vocals. The superb performance of this microphone is not affected by rough handling because of its rugged construction, proven shock mount system, and hardened steel mesh grille. Typical applications for the Beta 58A include lead vocals, backup vocals and speech.
- Smooth, extended frequency response for outstanding sound for professional live vocal use
- Consistent supercardioid pattern provides the best gain-before-feedback among dynamic microphones
- Pneumatic shock mount reduces handling noise
- Frequency response: 50 to 16,000 Hz
-
Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect
-
Uniform supercardioid pattern for high gain before feedback and superior rejection of off–axis sound
-
Neodymium magnet for high signal–to–noise output
-
Hardened steel mesh grille that resists wear and abuse
-
Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
-
Minimally effected by varying load impedance
-
Legendary Shure quality and reliability
Transducer | (Moving Coil, with Neodymium Magnet) Dynamic | Polar Pattern | Supercardioid | Frequency Response | 50 Hz - 16 kHz | Maximum Input Sound Level | not specified by manufacturer | Power Requirements | None Dynamic, Requires No Phantom or Battery Power | Output Impedance | 150 Ohms (290 Ohms Actual) | Output Connectors | XLR-3 Type | Dimensions | 6.375 x 2" (162 x 51mm) LxDiameter | Weight | 9.92 oz. (278 g) | | SHURE SM-58SE - Δυναμικό μικρόφωνο φωνής με διακόπτη on-off 50Hz to 15kHz
The Shure SM58S Vocal Microphone features a cardioid dynamic vocal design well suited for professional vocal use in live performances, sound reinforcement, and studio recording. A built-in spherical filter minimizes wind and breath "pop" noise, while the cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. The microphone offers durable construction, a high-quality internal shockmount system, and a steel mesh grille for withstanding rough handling. The SM58S is designed to perform consistently both outdoors and indoors and when used for singing or speech applications. The microphone features an integrated on/off switch and includes a microphone clip and a zippered pouch.
- Pneumatic shockmount system cuts down handling noise
- Effective, built-in spherical wind and pop filter
- Supplied with break-resistant microphone clip that rotates 180 degrees
- High quality, rugged, and reliable
- Cardioid dynamic
- Frequency response: 50 Hz to 15 kHz
Suggested Applications
Lead Vocals
Backup Vocals
Harmonica
Frequency Range |
50 Hz to 15 kHz |
Impedance |
150 Ohms |
Sensitivity |
-57.5 dBV/Pa at 1 kHz |
|
Δυναμικό μικρόφωνο με υπερκαρδιοειδές πολικό διάγραμμα ειδικό για ταμπούρα και πιατίνια, 30Kz-20kHz
Τύπος κάψας : σούπερ - καρδιοειδής
Ευαισθησία σε ελεύθερο πεδίο, χωρίς φορτίο : (1kHz) 1,8 mV/Pa +- 2 dB
Αντίσταση : 200 Ohm
Τερματισμένη αντίσταση : 1000 Ohm
Διαστάσεις : 270 x 33 x 36 mm
Βάρος : 450 g
|
- Tailored for Vocals & Speech
- Cardioid Polar Pattern
- Shock-Mounted Dynamic Cartridge
- 50 Hz to 15 kHz Frequency Response
The Shure 55SH Series II is a Unidyne cardioid dynamic microphone boasting a classic look and vocal-tailored sound for recording sessions, live stage applications, and on-camera use. The dynamic cartridge is shock-mounted to impede handling noise and vibrations transferred through your mic stand. The implementation of a cardioid polar pattern minimizes pickup of off-axis noise and ambience, yielding higher gain before feedback and attenuated stage bleed.
The mic delivers a frequency response of 50 Hz to 15 kHz with a gentle presence boost peaking at approximately 6.5 kHz. Its XLR 3-pin output ensures compatibility with most mixer inputs, microphone preamps, and portable PA systems. An on/off switch is provided for convenient muting of the mic between speeches or performances. The attached, self-tensioning, 5/8“-27 thread swivel mount can be tilted up to 45 degrees forward and 80 degrees backward. Chrome die-cast metal construction provides tour-worthy durability.
Classic Appearance
In addition to being a mic with solid audio characteristics for the studio and stage, the 55SH Series II makes a great prop microphone in video shoots, photos, and theater applications
Tailored Frequency Response
The 50 Hz to 15 kHz frequency response features a slight dip in the low-mid frequency range and a gentle rise from 1 to 10 kHz, making its sonic performance optimized for vocals, public address, and dialog
Cardioid Polar Pattern
The cardioid polar pattern is effective in minimizing sound pickup at the off-axis sections of the capsule, ensuring high gain before feedback
Shock-Mounted Cartridge
The dynamic capsule is shock-mounted for added protection against shock- and structure-born noise
Shure 55SH II Specs
Microphone
Sound Field |
Mono |
Operating Principle |
Pressure Gradient |
Capsule |
Dynamic |
Polar Pattern |
Cardioid |
Circuitry |
Solid-State |
Pad |
None |
High-Pass Filter |
None |
Performance
Frequency Range |
50 Hz to 15 kHz |
Impedance |
270 Ohms |
Sensitivity |
-58 dBV/Pa at 1 kHz |
Connectivity
Output Connectors |
1 x XLR 3-Pin |
Physical
Dimensions |
ø: 3.06 x L: 7.4" / ø: 77.8 x L: 188 mm |
Weight |
1.37 lb / 0.62 kg |
|
| |
Pick Up Pattern
|
Cardioid
|
Frequency Response
|
30 - 17,000 Hz
|
Sensitivity
|
2 mV/Pa +/- 3 dB
|
Nominal Impedance
|
200 ohms
|
Min Terminating Impedance
|
200 ohms
|
Dimensions
|
8.375" x 1.875" x 2"
|
Weight
|
Approx. 14 oz (385 g)
|
|
|
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.