AUDIX SCX25A Large diaphragm condenser microphone

Large diaphragm condenser microphone for live stage or studio.

The SCX25A is a professional studio condenser microphone with an elegant design and a patented capsule suspension system. Uniquely shock-mounted within an intricate machined brass ring, the capsule is completely isolated from the mic body and electronics. By successfully minimizing acoustic reflections and diffractions, the SCX25A delivers a pure, open air sound with exceptional detail and realism.

The SCX25A is consistent when responding to on and off-axis signals. This mic exhibits outstanding phase coherence and minimal proximity effect. With a wide cardioid polar pattern, the SCX25A enables the sound engineer to blend the sound of the instrument or vocal with the sound of the room. The SCX25A will handle SPLs in excess of 135 dB and provides up to 20 dB of ambient noise rejection.

The SCX25A is perfectly suited to capture the sound of acoustic instruments such as pianos, guitars, vibes, woodwinds, brass, percussion toys, drums, orchestra and symphony sections.

Supplied accessories include heavy duty snap to fit nylon clip and foam lined wood case.

MODEL VARIATIONS:
SCX25AMP - Matching pair
SCX25APS - Piano miking system

ΠΡΟΕΝΙΣΧΥΤΗΣ ''BLUE LINE SERIES'', ΑΠΟΚΡΙΣΗ ΣΥΧΝΟΤΗΤΑΣ 20ΗZ-20KHZ. ΡΥΘΜΙΖΟΜΕΝΟ GAIN -10 dB ΚΑΙ LOW CUT 75HZ. PHANTOM POWER 9-52V. ΣΥΝΔΥΑΖΕΤΑΙ ΜΕ ΤΙΣ ΚΑΨΕΣ CK 91, CK 92, CK 93, CK 94, CK 97-O, CK 97-C, CK 97-CVR, CK 98 ΜΕ ΕΙΔΙΚΟ ΣΥΝΔΕΣΜΟ ΤΥΠΟΥ BAYONET.

Specifications

Polar pattern: hypercardioid/directional
Frequency range: 20?20,000 Hz
Sensitivity: 25 mV/Pa (-32 dBV)
Max. SPL for 1 % THD: 124/134 dB
Equivalent noise level: 17 dB-A
Signal/noise ratio (A weighted): 77 dB
Preattenuation pad: -10 dB, switchable Bass cut filter: 12 dB/octave at 75 Hz
Electrical impedance: 200 Ohms
Recommended load impedance: >1,000 Ohms
Power requirement: 9 to 52 V phantom power to DIN 45 596
Current consumption:

The e 914  is a high grade condenser microphone  for very demanding applications.
Its outstanding sound properties qualify the e 914 for highly sophisticated tasks.
The e 914 is a perfect microphone for ambitious recordings and live performances.
Its main areas of application are acoustic guitars, cymbals, percussion, overhead,
orchestras, grand pianos etc . 
 
Features
Exceptionally lively, clear sound
Three-position sensitivity switch
Three-position bass roll-off/cut-off switch
Very high sound pressure handling capability
Exchangeable microphone capsule
Delivery Includes
e 914 microphone
Microphone clamp
Windscreen
Pouch
User manual

Technical Data
Pick-up pattern  cardioid 
Frequency response  20...20 000 Hz 
Sensitivity in free field, no load (1kHz)  7 mV/Pa 
Equivalent noise level  19 dB(A) 
Attenuation  0, -10, -20 dB 
Max. Sound pressure level (aktiv)  137, 147, 157 dB 
Nominal impedance  100 Ohm 
Min. terminating impedance  1000 Ohm 
Dimensions  24 x 157 mm 
Weight  198 g 

Πυκνωτικό μικρόφωνο με απόκριση συχνότητας 20Hz – 20KHz, ευαισθησία –39 db re 1Mv Pa, κύκλωμα εξαιρετικά χαμηλού θορύβου και υπερκαρδιοειδές πολικό διάγραμμα. Περιλαμβάνει δερμάτινη μαλακή θήκη μεταφοράς ZP1, μανταλάκι στήριξής RM3 και αντιανέμιο WS3.

The Shure Model VP88 is a single-point, stereo condenser microphone for use in professional studio recording, field production, electronic news gathering (ENG), and studio broadcasting applications. It combines two condenser cartridges in a single housing to create a stereo audio image of the sound source. It is unique in its ability to capture the realism of a live event and yet withstand rigorous field production environments.

The VP88 uses a mid-side (M-S) configuration. One microphone cartridge (Mid) faces forward to capture on-axis sound using a cardioid pickup pattern. The other microphone cartridge (Side) is bi-directional, capturing sound from either side. The VP88 contains an internal M-S matrix with three settings for different degrees of stereo image seperation. The internal matrix can be bypassed if an external matrix is used or if stereo imaging is done in post-production. Switches on the top of the microphone control output mode, stereo imaging, low-frequency rolloff settings, and battery on/off.

The VP88 can operate on phantom power or an internal 6V battery. The VP88 is supplied with a multi-connector "Y-splitter" cable, foam windscreen, swivel stand adapter, 6-volt battery, and zippered carrying/storage bag. Optional accessories include an isolation mount, a 7.6 m (25 ft) microphone extension cable, a phantom power supply, and a 4.3 m (14 ft) microphone stand.

• Time-coherent, Mid-Side (M-S) design for optimal stereo imaging
• Built-in stereo matrix for direct control of the stereo spread; direct M-S outputs available
• Mono compatibility ideal for broadcast applications
• 40 to 20,000 Hz frequency response
• Low noise and distortion
• Wide dynamic range
• Switch-selectable, low-frequency rolloff (12 dB/octave below 80 Hz) for reduced pickup of ambient noise and stand vibration
• Operates on phantom power or a 6V camera battery
• LED power indicator
• Internal shock mount for reduced stand vibration and handling noise
• Built-in "pop" screen
• Includes windscreen, swivel adapter, and Y-cable

Ζεύγος πυκνωτικών μικρόφωνων τύπου ʽπουράκιʼ ,κατάλληλο για ηχογράφηση ακουστικών οργάνων, χαμηλού θορύβου, με απόκριση συχνότητας 20Hz – 20KHz, ευαισθησία –38 db re 1Mv Pa, δυναμική περιοχή >128 db και max SPL 143 db. Περιλαμβάνει αντιανέμιο WS5, δύο μανταλάκια στήριξης RM5 και πλαστική βαλίτσα μεταφοράς.

• Ακουστική αρχή : Externally polarised single diaphragm
• Τύπος κάψας : Καρδιοειδής
• Απόκριση συχνότητας : 20Hz - 20kHz
• Αντίσταση εξόδου: 100Ω
• Λόγος σήματος προς θόρυβο din iec 651: 78dB
• Σχετικό επίπεδο θορύβου:
• Μέγιστο Επίπεδο Εντασης spl: 143 dB @ 1% THD into 1k_
• Ευαισθησία : -38 dB re 1v/Pa ± 2 dB equivalent to 12mV/Pa where 1 Pa = 94dBSPL
• Τροφοδοσία : P48 Supply (38V–52V), P24 Supply (20V-26V)
• Κατανάλωση : 4 mA, 2 mA,
• Βάρος : 100g